首页> 外文期刊>Optical fiber technology >Investigation of fatigue crack in stainless steel using a mobile fiber Bragg grating ultrasonic sensor
【24h】

Investigation of fatigue crack in stainless steel using a mobile fiber Bragg grating ultrasonic sensor

机译:使用移动光纤布拉格光栅超声传感器研究不锈钢中的疲劳裂纹

获取原文
获取原文并翻译 | 示例
           

摘要

A mobile fiber Bragg grating (FBG) sensor was applied to detect a closed fatigue crack in 18Cr-8Ni stainless steel by ultrasonic pitch-catch method. Response to ultrasound that crossed fatigue crack showed a time delay compared with the reference response in intact area. Conventional piezoelectric sensors were applied to the similar experiment and the response signal was compared with that detected with the FBG sensor. Experimental results showed that FBG sensors could determine the location of crack tip more precisely than piezoelectric sensors.
机译:应用移动光纤布拉格光栅(FBG)传感器,通过超声波俯仰捕获法检测18Cr-8Ni不锈钢中的闭合疲劳裂纹。穿越疲劳裂纹的超声响应与完整区域的参考响应相比显示出时间延迟。将常规压电传感器应用于类似实验,并将响应信号与FBG传感器检测到的信号进行比较。实验结果表明,与压电传感器相比,FBG传感器可以更精确地确定裂纹尖端的位置。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号