首页> 外文期刊>Proceedings of the IEE - Part B: Radio and Electronic Engineering >An electronic supply for use in the calibration of instruments
【24h】

An electronic supply for use in the calibration of instruments

机译:用于仪器校准的电子电源

获取原文
获取原文并翻译 | 示例
           

摘要

A brief review is given of some of the features of supplies that are suitable for use in the calibration of a.c. instruments, and an account is then given of a high-power oscillator-amplifier set that has been built for this purpose. The set consists of an oscillator, two amplifiers and a phase-shift unit. An output of at least 700VA is available at unity power factor within the range 30c/s-5kc/s from each amplifier, and if necessary the two outputs can be connected in series. The output voltage is free from random variations greater than 0.01%, drifts at maximum power output by not more than 0.003% per minute, and has a supply-frequency component not greater than 0.01%. The output voltage is therefore always constant to 0.01% for the time taken to calibrate a point on an instrument scale. The distortion in the outputs of the oscillator-amplifier set is never greater than 0.45% of the fundamental at any frequency or power output within its rating.
机译:简要回顾了适用于交流校准的电源的某些功能。仪器,然后说明为此目的而构建的高功率振荡器-放大器套件。该装置由一个振荡器,两个放大器和一个相移单元组成。每个放大器的输出功率为30c / s-5kc / s,单位功率因数至少为700VA,如有必要,两个输出可以串联。输出电压无大于0.01%的随机变化,在最大功率输出时每分钟漂移不超过0.003%,电源频率分量不超过0.01%。因此,在校准仪器刻度上的时间时,输出电压始终恒定为0.01%。在其额定范围内的任何频率或功率输出下,振荡器放大器组输出的失真都不会大于基波的0.45%。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号