...
  • 主题
高级搜索  >
历史搜索 清空历史
首页> 外文期刊>Proceedings of the Institution of Mechanical Engineers. Part L, Journal of Materials: Design and Application >Application of Taguchi method in the optimization of process parameters for a sol-gel-derived nano-alumina film
【24h】

Application of Taguchi method in the optimization of process parameters for a sol-gel-derived nano-alumina film

机译：Taguchi方法在溶胶-凝胶纳米氧化铝膜工艺参数优化中的应用

获取原文
获取原文并翻译 | 示例
           
页面导航
  • 摘要
  • 著录项
  • 相似文献
  • 相关主题

摘要

In this study, the Taguchi method is used to find the optimal process parameter combinations for realizing both lower film thickness and crystallite size and higher film thickness and crystallite size in a nano-alumina film prepared by sol-gel route. The process parameters evaluated were the molar concentration of the sol, dipping time, and sintering temperature. An orthogonal array, signal-to-noise ratio, and an analysis of variance were employed to analyze the effect of these process parameters. Surface profile measurement and X-ray diffraction techniques were used to measure the film thickness and crystallite size respectively. The analysis showed that the molar concentration of the sol was the most significant parameter on the film thickness and crystallite size, followed by dipping time and sintering temperature. Experimental results are supplied to exemplify the strength of this approach.
机译：在这项研究中，Taguchi方法用于找到最佳工艺参数组合，以实现通过溶胶-凝胶法制备的纳米氧化铝膜的较低膜厚和微晶尺寸以及较高膜厚和微晶尺寸。评估的工艺参数是溶胶的摩尔浓度，浸渍时间和烧结温度。使用正交阵列，信噪比和方差分析来分析这些过程参数的效果。使用表面轮廓测量和X射线衍射技术分别测量薄膜厚度和微晶尺寸。分析表明，溶胶的摩尔浓度是影响膜厚和微晶尺寸的最重要参数，其次是浸渍时间和烧结温度。提供了实验结果来说明这种方法的优势。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号