Fundamental study on latent cold heat storage by means of oil droplets at low freezing point (5th Report, flow and solidification characteristics of oil droplets ascending in low-temperature water solution having various flow velocities)

Hideo Inaba; Kenji Sato

首页> 外文期刊>日本機械学会論文集. B編 >Fundamental study on latent cold heat storage by means of oil droplets at low freezing point (5th Report, flow and solidification characteristics of oil droplets ascending in low-temperature water solution having various flow velocities)

【24h】

Fundamental study on latent cold heat storage by means of oil droplets at low freezing point (5th Report, flow and solidification characteristics of oil droplets ascending in low-temperature water solution having various flow velocities)

机译：利用低凝点下的油滴进行潜热蓄热的基础研究（第五次报告，在具有不同流速的低温水溶液中油滴的流动和凝固特性上升）

获取原文

获取原文并翻译 | 示例

掌桥外文数据库（机构版） >>

开具论文收录证明 >>

文献代查 >>

页面导航

摘要
著录项
相似文献
相关主题

摘要

Flow and solidification characteristics of tetradecane droplets [melting point of 5.8℃, latent heat of 229.1 kJ/kg, density of 770kg/m~3(At6℃) ascending in ethylene glycol water solution of 30 mass percent at low temperature were investigated experimentally in order to examine the existence of a liquid-liquid or liquid-solid direct-contact-type latent cold heat storage system. Some interesting freezing behaviors of droplets were observed under the conditions of various water solution flow velocities and oil-injection nozzle diameters by the visualization technique.

机译：实验研究了在低温30％乙二醇水溶液中，熔点为5.8℃，潜热为229.1 kJ / kg，密度为770kg / m〜3（At6℃）的十四烷液滴的流动和凝固特性。为了检查是否存在液-液或液-固直接接触式潜冷蓄热系统。通过可视化技术，在各种水溶液流速和喷油嘴直径的条件下，观察到了一些有趣的液滴冻结行为。

著录项

来源
《日本機械学会論文集. B編》 |1997年第607期|p.1021-1028|共8页
作者
Hideo Inaba; Kenji Sato;
展开▼
作者单位

展开▼
收录信息
原文格式 PDF
正文语种 jpn
中图分类机械、仪表工业;
关键词
latent cold heat storage; direct contact freezing; tetradecance droplet;

机译：潜冷蓄热直接接触冻结;四分之一液滴;

相似文献

外文文献
专利

1. Fundamental study on latent cold heat storage by means of oil droplets at low freezing point (4th Report, numerical calculation of motion and solidification characteristics of oil droplet ascending in a cold water solution by buoyancy) [J] . Hideo Inaba, Kenji Sato 日本機械学会論文集. B編 . 1997,第607期

机译：低凝点下油滴对潜冷蓄热的基础研究（第四次报告，浮力在冷水溶液中上升时油滴运动和凝固特性的数值计算）
2. Fundamental study on latent cold heat energy storage by means of oil droplets at low freezing point (Cold heat energy release characteristics of direct-contact heat exchange between solidified oil droplets and hot air) [J] . Hideo INABA, Kenji SATO JSME International Journal. Series B . 1997,第4期

机译：低凝点下利用油滴进行潜热蓄热的基础研究（凝固的油滴与热空气之间直接接触式热交换的冷能释放特性）
3. (PS176) Influence of viscosity of silicon oil and droplet size on descending velocity of droplets using water model under the flow [J] . Hyeok-In Kwon, Sun-Joong Kim 材料とプロセス: 日本鉄鋼協会講演論文集 . 2018,第2a176期

机译：（PS176）硅油和液滴尺寸粘度对流量下水模型的液滴下降速度的影响
4. A Computational Study of Internal Flows in a Heated Water-Oil Emulsion Droplet [C] . Jaeheon Sim, Hong G. Im, Suk Ho Chung AIAA SciTech Forum;AIAA aerospace sciences meeting . 2015

机译：水-油-乳化液滴内部流动的计算研究
5. Evaporative heat and mass transfer with solubility driven solidification of aqueous droplet flows. [D] . Bahadorani, Payam. 2009

机译：蒸发热和传质以及溶解度驱动的水滴流动的固化。
6. Effects of two-phase inlet quality mass velocity flow orientation and heating perimeter on flow boiling in a rectangular channel: Part 1 – Two-phase flow and heat transfer results [O] . Chirag R. Kharangate, Lucas E. O’Neill, Issam Mudawar -1

机译：两相入口质量质量速度流向和加热周长对矩形通道中流沸腾的影响：第1部分–两相流和传热结果
7. Fundamental Study on Latent Cold Heat Storage by Means of Oil Droplets at Low Freezing Point. (5th Report. Flow and Solidification Characteristics of Oil Droplets Ascending in Low-Temperature Water Solution Having Various Flow Velocities). [O] . Hideo INABA, Kenji SATO 1997

机译：低冰点液滴潜伏热储存的根本研究。（第五次报告。低温水溶液中具有各种流速的油滴的流动和凝固特性）。

Fundamental study on latent cold heat storage by means of oil droplets at low freezing point (5th Report, flow and solidification characteristics of oil droplets ascending in low-temperature water solution having various flow velocities)

摘要

著录项

相似文献

相关主题

期刊订阅