首页>外文会议>其他>Proceedings of the 3rd international conference on power beam processing technologies.

Proceedings of the 3rd international conference on power beam processing technologies.

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Deposition and properties of CrNx Films by High Power Pulsed Unbalanced Magnetron Sputtering

机译：高功率脉冲不平衡磁控溅射沉积CrNx薄膜及其性能
- 作者：X.D.Mu;Z.X.Mu;C.Wang;L.Jia;H.R.Zang;B.B.Liu;C.Dong
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
2.Modeling Study on Stress Distribution as Effects of Temperatures and TGO Thickness in ScYSZ/NiCrAlY TBC System

机译：ScYSZ / NiCrAlY TBC系统中应力分布受温度和TGO厚度影响的建模研究
- 作者：H.F.Liu;Q.L.Li;S.L.Li;Y.M.Li
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- sc2o3-y2o3-zro2;
- thermal barrier coating;
- stress analysis;
- finite element;
- tgo;
3.Design and Preparation of Medium-wave Infrared Broad-band Short-Wavelength Pass Filter

机译：中波红外宽带短波通滤波器的设计与制备
- 作者：B.S.Zhang;T.Chen;Y.Q.Xiong;D.S.Wang;C.Wang
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- medium-wave infrared;
- short-wavelength pass filter;
- film design;
- preparation;
4.Effect of Laser Shock Processing on High Cycle Fatigue Properties of 1Cr11Ni2W2MoV Stainless Steel

机译：激光冲击处理对1Cr11Ni2W2MoV不锈钢高周疲劳性能的影响
- 作者：L.Zhou;Y.H.Li;Q.P.Li;C.Wang
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- laser shock processing;
- 1cr11ni2w2mov stainless steel;
- high cycle fatigue properties;
5.Enhanced Surface Properties Induced by High Current Pulsed Electron Beam (HCPEB) Treatment

机译：大电流脉冲电子束（HCPEB）处理可增强表面性能
- 作者：D.Y.He;S.Z.Hao;M.C.Li;Y.Xu;C.Dong
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- high current pulsed electron beam;
- surface treatment;
- microstructure;
- property;
6.Surface Profiles and Residual Stresses on Laser Shocked Zone of Ti6Al4V Titanium Alloy

机译：Ti6Al4V钛合金激光冲击区的表面轮廓和残余应力
- 作者：Z.W.Cao;S.L.Gong;S.K.Zou;Z.G.Che
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- laser shock processing;
- ti6al4v;
- surface profiles;
- residual stresses;
7.Distribution Features of the Residual Stress for T-Joints by Laser Welding

机译：T型接头激光焊接残余应力的分布特征
- 作者：E.G.He;S.L.Gong;B.Wu;L.Chen
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- stainless steel;
- laser welding;
- t-joints;
- heat treatment;
8.Microstructure and Tribological Performances of 25NiCr-Cr3C2 Coatings Prepared by Laser-Hybrid Plasma Spraying Technology

机译：激光混合等离子体喷涂25NiCr-Cr3C2涂层的组织与摩擦学性能
- 作者：S.Q.Li;Q.L.Li;S.L.Gong
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- laser hybrid plasma spraying;
- 25nicr-cr3c2 coating;
- performance;
9.Study on Hydrophobic and Mechanical Properties of Fluoro-Carbon Film

机译：氟碳薄膜的疏水和力学性能研究
- 作者：G.J.Ma;G.Q.Lin;G.Sun;H.C.Wu
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- fluoro-carbon film;
- microwave ecr cvd;
- psii;
- hydrophobicity;
10.A Review of Ion Beam Assisted Deposition of Thermal Barrier Coatings

机译：离子束辅助沉积热障涂层的研究进展
- 作者：L.Liu;W.Gao;H.F.Zhang;X.G.Lei;X.Z.Cui;H.C.Wu;Y.F.Zheng
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- ion beam assisted deposition;
- ion source;
- thermal barrier coatings;
- thermal conductivity;
11.Effect of Annealing on Mechanical Properties of TaN Film

机译：退火对TaN薄膜力学性能的影响
- 作者：X.Liu;G.J.Ma;Lin Zhang;G.Sun;Y.P.Duan;S.H Liu
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- magnetron sputtering;
- tan film;
- annealing;
12.Study on Characteristics and Generation Mechanism of YAG Pulsed Laser Welding Cracks of AZ31B Magnesium Alloy

机译：AZ31B镁合金的YAG脉冲激光焊接裂纹特征及产生机理研究
- 作者：Z.Q.Cuia;W.X.Wang;E.Si;B.S.Xu
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- az31b magnesium alloy;
- nd:yag pulsed laser;
- laser welding;
- welding crack;
- crack extending;
13.Effects of Process Parameters on Weld Geometry in Electron Beam Welding Based on Partial Correlation Analysis

机译：基于偏相关分析的工艺参数对电子束焊接中焊接几何形状的影响
- 作者：X.F.Shen;W.R.Huang;Y.Z.Zhang
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- electron beam welding;
- process parameters;
- depth-width ratio;
- partial correlation analysis;
14.Study of Laser Lap Welding of SUS301L Austenitic Stainless Steel Using Optimal Design Method

机译：优化设计方法研究SUS301L奥氏体不锈钢的激光搭接焊
- 作者：J.Liu;Y.Shi;H.Zhang
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- laser lap welding;
- sus301l austenitic stainless steel;
- welding deformation;
- orthogonal experiments;
15.Theory Analysis and Experiment Investigation of Laser Shock Processing on Titanium Alloy Blade

机译：钛合金叶片激光冲击加工的理论分析与实验研究
- 作者：Z.G.Che;S.L.Gong;Z.W.Cao;S.K.Zou;Y.Gao;H.Ma
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- laser shock processing;
- pressure model;
- absorbing wave layer;
- nanocrystallation;
- titanium alloy blade;
16.Study on Design and Fabrication of Micro Thermal Control Louvers

机译：微型热控百叶窗的设计与制造研究
- 作者：S.Z.Cao;X.K.Chen;G.Wu;J.P.Yang;R.Wang;L.X.Wang;K.W.Shang
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- micro louvers;
- micromachining;
- thermal control;
17.Prediction and Control of Distortion and Residual Stresses in Electron Beam Welding

机译：电子束焊接变形和残余应力的预测与控制
- 作者：Nick Bagshaw;Chris Punshon
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- eb welding;
- residual stress;
- distortion;
18.Mathematical Delineation of the Thermophysical Process of Electron Beam Welding

机译：电子束焊接热物理过程的数学描述
- 作者：X.D.Wang;P.F.Fu;Q.Y.Shi
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- electron beam welding;
- mass transfer;
- identification of phase interface;
- keyhole;
19.Characterization and Corrosion Resistance of Laser-Cladding Al2O3-13TiO2 Coating on AZ91D Magnesium Alloy

机译：AZ91D镁合金上激光熔覆Al2O3-13％TiO2涂层的表征和耐蚀性
- 作者：J.G.Qian;J.X.Zhang;S.Q.Li;C.Wang;S.L Gong
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- laser plasma hybrid spraying;
- mg alloy;
- corrosion resistance;
20.Shape Character of Fusion-Solidification Zone of Ebw Joints for Titanium Alloy

机译：钛合金焊丝熔接固溶区的形状特征
- 作者：P.F.Fu;Z.Y.Mao;Y.J.Wang;S.L.Gong;X.Liu
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- electron beam welding;
- titanium alloy;
- fusion-solidification zone;
- mathematical model;
21.Joint Tracking With the Electron Beam in Combination With a Work Piece Fixture

机译：电子束与工件夹具的联合跟踪
- 作者：M.Muecke;K.Leeb
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- electron beam welding;
- seam tracking;
- multi pool welding;
22.Fast Beam Deflection and Beam Quality-Keys to Economic High Quality Electron Beam Applications

机译：快速束偏转和束质量-经济高质量电子束应用的关键
- 作者：Uwe Clau;James Bull
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- az31b magnesium alloy;
- welding joint;
- fatigue crack propagation rate;
- brittle fracture;
23.Characteristics of 5A90 Aluminium-Lithium Alloy by YAG-MIG Hybrid Welding

机译：YAG-MIG堆焊5A90铝锂合金的特性
- 作者：F.Xu;S.L.Gong;L.Chen;J.Yang
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- al-li alloy;
- hybrid welding;
- lbw;
- microstructure;
- tensile property;
24.Impact Toughness and Fracture Analysis of Thick TC-DT Alloy Electron Beam Welded Joints

机译：厚TC-DT合金电子束焊接接头的冲击韧性和断裂分析
- 作者：W.P.Fang;Y.W.Shi;Z.Y.Mao;Z.Y.Tang
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- tc4-dt alloy;
- electron beam weld;
- impact toughness;
- fracture morphology;
25.Comparative Analysis on Microstructure and Mechanical Properties Between EBW and Tandem Welding of 7A52 Aluminium Alloy Joint

机译：EBW与7A52铝合金接头串联焊接组织和力学性能的比较分析。
- 作者：X.W.Zhai;F.Chen;L.Bi;C.C.Zhang
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- laser lap welding;
- sus301l austenitic stainless steel;
- welding deformation;
- orthogonal experiments;
26.50 Years Experience of the E.O. Paton Electric Welding Institute in Field of Electron Beam Welding

机译：E.O.的50年经验帕顿电焊研究所电子束焊接领域
- 作者：O.K.Nazarenko;V.M.Nesterenkov
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- electron beam welding;
- paton electric welding institute;
- technology;
- equipment;
27.Simulation on the Melt Flow in Laser Full Penetration Welding With a Model Including A Non-rotational Symmetry Keyhole Based on Energy Balance

机译：基于能量平衡的含非旋转对称锁孔模型的激光全熔焊熔体流动模拟
- 作者：L.J.Zhang;J.X.Zhang;J.Niu;B.Wu;L.Chen;S.L.Gong
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- laser welding;
- titanium alloy;
- non-rotational symmetry keyhole;
- simulation;
28.Study on the Control of Electron Beam Welding Energy Distribution

机译：电子束焊接能量分布控制的研究
- 作者：W.H.Teng;Z.H.Mo;Y.Z.Zhang
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- electron beam welding;
- energy distribution;
- scanning graph;
29.The Fracture Surface 3D Reconstruction of Welded Joint and Damage Analysis

机译：焊接接头断裂面3D重建及损伤分析
- 作者：P.P.Lv;H.D.Guo;B.Wu;J.W.Li
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- sem;
- 3d reconstruction;
- fractal dimension;
- damage analysis;
30.Mechanical Properties of Coating and Part by Laser Engineered Net Shaping by Nanoindentation Testing

机译：纳米压痕测试通过激光工程网成形对涂层和零件的力学性能
- 作者：C.F.Xue;X.L.Tian;K.L.Lin
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- nanoindentation;
- laser engineered net shaping (lens);
- solidify speediness;
- mechanical property;
31.Study on the Formability of Iron-Based Powder Metal Materials in Plasma arc Direct Metal Forming Process

机译：等离子弧直接金属成形过程中铁基粉末金属材料的成形性研究
- 作者：D.Xia;Y.H.Xiang;B.S.Xu;Y.H.Lv
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- plasma arc;
- direct metal forming;
- iron-based powder;
32.The Effect of Thickness on the Sheet Metal Bending by Laser Peen Forming

机译：厚度对激光喷丸成形板料弯曲的影响
- 作者：Y.X.Hu;Z.Q.Yao
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- sheet metal;
- laser peen forming;
- bending;
- thickness;
- numerical simulation;
33.Mechanical Properties and Microstructure Characteristics of Laser Rapid Forming Rene88DT Superalloy

机译：激光快速成型Rene88DT高温合金的力学性能和显微组织特征
- 作者：X.M.Zhao;S.L.Gong;X.Lin;J.Chen;W.D.Huang
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- laser rapid forming;
- rene88dt;
- mechanical properties;
- microstructure characteristics;
34.Laser Powder Deposition of a Fe-Ni-Cr Superalloy: Analysis of Microstructure Formation and Mechanical Properties

机译：Fe-Ni-Cr高温合金的激光粉末沉积：显微组织形成和力学性能分析
- 作者：J.Huang;P.L.Nie;Y.C.Zhang;H.G.Liu;Z.G.Li;Y.X.Wu
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- fe-ni-cr superalloy;
- laser powder deposition (lpd);
- strengthening phase;
- laves phase;
35.Study of Electron Beam Surfi-sculpt During Composite Materials Joining

机译：复合材料连接过程中电子束表面造型的研究
- 作者：X.C.Wang;E.M.Guo;S.L.Gong;B.Dance
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- electron beam surfi-sculpt;
- comeld;
- joining methods;
- tensile experiments;
- numberical simulation;
36.Residual Stress Measurement in Electron Beam Welded Joints of 50mm Thick Titanium Alloy

机译：50mm厚钛合金电子束焊接接头的残余应力测量
- 作者：B.Wua;J.X.Zhang;C.Liu;S.L.Gong
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
37.Microstructures and Mechanical Properties of Electron Beam Welds in Thick-Section Titanium Alloy Plates

机译：厚截面钛合金板中电子束焊缝的组织和力学性能
- 作者：S.Q.Guo;B.Zhou;W.H.Liu;W.Y.Zhang;X.J.Zhang;N.Li
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- laser lap welding;
- sus301l austenitic stainless steel;
- welding deformation;
- orthogonal experiments;
38.The Surface Profile of Laser Peening with Square Spots

机译：方形斑点激光喷丸的表面轮廓
- 作者：S.K.Zou;Z.W.Cao;Z.G.Che
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- laser peening;
- surface profile;
- residual stress;
- square spot;
39.Study on Doped Dlc Films Deposited by Pulse Arc Technology

机译：用脉冲电弧技术沉积掺杂的Dlc薄膜的研究
- 作者：D.C.Zhao;N.Ren;Z.J.Ma;G.J.Xiao;S.H.Wu
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- diamond like carbon;
- doped;
- pulse arc deposition;
- mechanics properties;
40.Research on Pulse Electron Beam Welding Gridbias Power Supply

机译：脉冲电子束焊接栅偏电源的研究
- 作者：G.N.Xu;B.J.Qi;J.J.Wu;H.L.Dai
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- pulse electron beam welding;
- gridbias;
- high voltage;
41.Hybrid Laser-GMAW Welding of High Strength Quenched and Tempered Steels

机译：高强度调质钢的混合激光-GMAW焊接
- 作者：S.L.Yang;R.Kovacevic
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- hybrid laser-gmaw welding;
- high strength quenched and tempered steels;
- hydrogen induced cracking;
42.Microstructure and Microhardness of Laser Beam Welded Al-Mg-Mn-Zr-Er Joint

机译：激光焊接Al-Mg-Mn-Zr-Er接头的组织和显微硬度
- 作者：D.X.Yang;X.Y.Li;D.Y.He;Z.R.Nie
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- microstructure;
- microhardness;
- aluminum alloy;
- laser welding;
43.Low Power Laser Surfi-Sculpt

机译：低功率激光表面雕刻
- 作者：J.E.Blackburn;P.A.Hilton
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- laser;
- surfacing;
- yb-fibre;
- surfi-sculpt;
44.Study on the J-integral and Failure Assessment Line of Electron Beam Welded Thick TC4-DT Alloy Joints

机译：电子束焊接厚TC4-DT合金接头的J积分和失效评估线的研究
- 作者：W.Lu;Y.W.Shi;X.Y.Li;Y.P.Lei;S.L.Gong;Q.Guan;H.Y.Zhao
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- electron beam welding;
- tc4-dt alloy joints;
- limit load;
- j-integral;
- failure assessment line;
45.Direct Numerical Simulation of Keyhole Instabilities and Bubbles Generation Processes during Deep Penetration Laser Welding of Titanium Alloy

机译：钛合金深熔激光焊接过程中小孔不稳定性和气泡产生过程的直接数值模拟
- 作者：S.Y.Pang;L.L.Chen;L.Chen;T.Chen;J.X.Zhou
- 会议名称：《》 | 2010年
- deep penetration laser welding;
- titanium alloy;
- keyhole instability;
- bubble generation;
- direct numerical simulation;
46.Adaptively Controlled Hybrid Welding Using a High Brightness Laser

机译：使用高亮度激光的自适应控制混合焊接
- 作者：C.M.Allen;G.Shi;P.A.Hilton
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- hybrid welding;
- steel;
- adaptive control;
- fit-up;
- tolerance;
47.A Research on the Fatigue Property of Laser Butt Welding of TA15 Titanium Sheet

机译：TA15钛板激光对接焊接疲劳性能的研究。
- 作者：X.M.Wang;Z.Q.Zhou;W.T.Liu
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- titanium;
- laser beam welding;
- fatigue behavior;
- equivalent theoretical stress concentration coefficient;
- s-n curvefollowed;
48.Investigation on the Effect of Electron Beam Weld Shape on Fatigue Performances of Thickness Titanium Alloy

机译：电子束焊接形状对厚度钛合金疲劳性能影响的研究
- 作者：X.Liu;S.L.Gong;Y.P.Lei
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- weld shape;
- fatigue performance;
- analytic hierarchy process;
- electron beam welding;
- thickness titanium alloy;
49.Beam Quality Test Technology and Devices of Electron Beam Welding

机译：电子束焊接的束质量测试技术及装置
- 作者：Y.Peng;K.H.Wang;Q.Zhou;Y.J.Wang;P.F.Fu
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- electron beam;
- quality;
- power density distribution;
50.Manufacturing Technology of Refractory Metal Parts Based on SLS Rapid Prototyping

机译：基于SLS快速成型的难熔金属零件制造技术
- 作者：B.Liu;P.K.Bai;E.M.Ding
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- refractory metal parts;
- polymer-coated mo powder;
- selective laser sintering;
51.Research on NDT of Laser Rapid Formed Titanium Alloy Structures

机译：激光快速成型钛合金结构的无损检测研究
- 作者：L.J.Shi;Y.W.Shi;J.Liang
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- ultrasonic testing;
- titanium alloy;
- defects;
- laser rapid formed;
52.Formability of Ti-1023 Alloys Fabricated by Direct Laser Deposition

机译：直接激光沉积制备的Ti-1023合金的可成形性
- 作者：H.X.Li;S.L.Gong;Q.X.Fei;C.X.Yu
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- ti-1023 alloys;
- direct laser deposition;
- equiaxed grains;
- epitaxial growth;
- non-fusion;
53.Research on laser forming technology of TA15 titanium alloy sheet metal

机译：TA15钛合金薄板激光成型技术研究
- 作者：B.Wang;S.L.Gong;M.Sun;Y.L.Ma;X.M.Zhao;W.Yao
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- laser forming;
- ta15;
- sheet metal;
- processing parameter;
54.Research of Laser Cladding Ni-based Alloys on Stainless Steel

机译：不锈钢表面激光熔覆镍基合金的研究
- 作者：Q.X.Fei;W.B.Cao;F.M.Bai;Y.Zhang;Y.S.Tan
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- laser cladding;
- ni-based alloys;
- microstructure;
- wear resistance properties;
55.Ultrasonic Frequency Fast-convert Pulse Plasma Spraying Power Supply Topology

机译：超声波快速转换脉冲等离子喷涂电源拓扑
- 作者：W.Zhang;B.J.Qi;H.Y.Xu
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- ultrasonic frequency pulse;
- fast-convert;
- plasma spraying;
56.Three-Dimensional Transient Model of Keyhole Dynamics During Laser Deep Penetration Welding

机译：激光深熔焊接中锁孔动力学的三维瞬态模型
- 作者：R.P.Wang;Y.P.Lei;Y.W.Shi;X.Y.Li
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- laser deep penetration welding;
- keyhole;
- metal pool;
- numerical simulation;
57.Influence of Vanadium Element on Microstructure of Electron Beam Welded Titanium Alloy to Stainless Steel Joint

机译：钒元素对电子束焊接钛合金-不锈钢接头组织的影响
- 作者：T.Wang;B.G.Zhang;G.Q.Chen;J.C.Feng
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- titanium alloy;
- stainless steel;
- vanadium content;
- microstructure;
- mechanical properties;
58.Inhibit the Porosity with Electron Beam Scanning Method in Welding LD10 Aluminium Alloy

机译：电子束扫描法抑制LD10铝合金焊接中的气孔
- 作者：Z.H.Mo;Y.R.Wang;W.R.Huang
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- electron beam welding;
- ld10 aluminium alloy;
- porosity;
59.Analysis of Defect In Cross-Weld Between Plasma Arc Welding And Friction Stir Welding On Aluminum Alloy

机译：铝合金等离子弧焊与搅拌摩擦焊跨焊缺陷分析
- 作者：S.J.Chen;B.T.Li;F.Jiang
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- cross-weld;
- friction stir welding;
- plasma arc welding;
- welding holes;
60.The Dissymmetry of Friction Stir Welding Joints and Variable Polarity Plasma Arc Welding Joints Study

机译：搅拌摩擦焊接头的不对称性与等离子弧焊接头的不对称性研究
- 作者：S.J.Chen;L.Wang;Y.Yu
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- fsw;
- vppaw;
- nano-indentation experiment;
- half-leafzone;
- dissymmetry;
61.Microstructures and Properties of Copper-steel Welded Joint by Twin Wire Welding

机译：双丝焊接铜钢焊接接头的组织和性能
- 作者：J.Yu;B.W.Wu;S.B.Zheng;K.H.Wang;Q.Zhou
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- copper-steel welded joint;
- twin-wire welding;
- mechanical property;
- metallurgical structure;
- composition of weld line;
62.Influence of Welding Power to the microstructure and properties of 304 stainless steel joints in CO2 laser welding

机译：焊接功率对CO2激光焊接中304不锈钢接头组织和性能的影响
- 作者：J.Luo;D.J.Liu;D.K.Yin;J.F.Yang
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- laser welding;
- 304 stainless steel;
- microstructure;
- properties;
63.Microstructure and Properties of Welding Joints of Aluminium Alloy by the Laser-Mig Hybrid Welding

机译：激光-Mig混合焊接铝合金焊接接头的组织和性能
- 作者：B.Tan;B.Ma;D.G.Cheng;Z.H.Ma;H.W.Liu
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- aluminum alloy;
- laser-mig hybrid welding;
- microstructure;
- mechanical property;
64.Characteristics of Joint Welded by Laser Welding of Aluminium-Lithium Alloy With Filler Wire

机译：铝锂合金与填充丝激光焊接接头的焊接特性
- 作者：J.Yang;X.Y.Li;S.L.Gong;L.Chen;F.Xu
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- al-li alloy;
- laser beam welding (lbw);
- laser welding with filler wire (lwfw);
- weld shape;
- microstructure;
- mechanical properties;
65.High Current and High Intensity Ion Beam Sources and Their Technological Applications

机译：高电流高强度离子束源及其技术应用
- 作者：A.I.Ryabchikov
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- high current and intense ion beams;
- plasma;
- modification of materials;
- coating deposition;
- microparticle evaporation;
66.Microstructure and Phase Stability of Plasma Sprayed Sc2O3-Y2O3-ZrO2 TBCs

机译：等离子喷涂Sc2O3-Y2O3-ZrO2 TBC的微观结构和相稳定性
- 作者：Q.L.Li;H.F.Liu;W.H.Yang;S.Q.Li;H.J.Chen
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- thermal barrier coatings;
- scandia;
- yttria-stabilized zirconia;
- microstructure;
- phase stability;
67.The Potential of EB Surface Processing within the Aerospace Industry

机译：航空航天工业中EB表面处理的潜力
- 作者：A.L.Buxton;B.G.I.Dance
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- surfi-sculpt;
- aerospace;
- comeld;
- heat exchange;
68.Improving the Wear Resistance of AZ31B Magnesium Alloy by Laser Cladding with Al-Si+Al2O3-TiO2 Powders

机译：Al-Si + Al2O3-TiO2粉末激光熔覆改善AZ31B镁合金的耐磨性
- 作者：Z.Q.Cui;W.X.Wang;H.L Wu;B.S.Xu
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- az31b magnesium alloy;
- laser cladding;
- al-si+ al2o3-tio2 powders;
- wear resistance;
69.High Energy Micro-arc Alloying of ZM5 Mg Alloy by Mg-Y Electrode Under Liquid

机译：液态镁钇电极对ZM5镁合金的高能微弧合金化。
- 作者：C.J.Chen;M.Zhang;Y.Z.Su;S.C.Zhang;J.L.Zhou
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- high-energy micro-arc alloying (hemaa);
- surface alloying/modification;
- mg alloy;
- mg-y;
70.Surface Top Graphology, Corrosion and Microhardness of Oxygen Diffusion Hardened Pure Titanium Alloy TA4 After Laser Surface Melting

机译：激光表面熔化后氧扩散硬化纯钛合金TA4的表面顶面形貌，腐蚀和显微硬度
- 作者：C.J.Chen;M.Zhang;Y.Z.Su;S.C.Zhang;J.L.Zhou
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- oxygen diffusion harden (odh);
- titanium alloy;
- laser surface melting;
- corrosion;
71.Corrosion Resistance of Single Layer and Multilayer TaN Coatings

机译：单层和多层TaN涂层的耐蚀性
- 作者：G.Sun;G.J.Ma;X.Liu;L.Zhang
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- tan multilayer coatings;
- corrosion behaviors;
72.The Influence of Laser Shock Processing to TC4 Titanium Alloy TIG Welding Bead Microstructure and Properties

机译：激光冲击加工对TC4钛合金TIG焊道组织和性能的影响
- 作者：H.Y.Xu;Z.G.Che;S.K.Zou;Z.W.Cao
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- laser shock processing;
- titanium alloy;
- hv hardness;
- tensile properties;
- fatigue life;
73.Effect of Oblique Deposition on Microstructure and Texture Evolution in TBCs Made by EB-PVD Process

机译：斜沉积对EB-PVD工艺制备TBCs组织和组织演变的影响
- 作者：X.G.Lei;H.C.Wu;X.H.Liu;Z.Z.Yao
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- thermal barrier coatings;
- eb-pvd;
- microstructure;
- texture;
74.Simulation of the Backward Flow of the Melted Pool into the Laser Keyhole

机译：熔池向激光小孔倒流的模拟
- 作者：H.Wang;H.Z.Huo
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- keyhole;
- laser welding;
- molten pool;
- simulations;
75.Microstructure and Texture Characterization in Nd:yag Laser Welds of 5A90 Aluminium-Lithium Alloy

机译：5A90铝锂合金Nd：yag激光焊接中的组织和织构表征
- 作者：L.Cuia;X.Y.Li;D.Y.He;L.Chen;S.L.Gong
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- laser welding;
- al-li alloy;
- microstructure;
- texture;
- ebsd;
76.Studies on SiO2 Used for Antireflective and Protective Film

机译：SiO2用于减反射保护膜的研究
- 作者：J.Z.Wang;D.S.Wang;Y.Q.Xiong;T.Chen
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- optical film;
- infrared ar film;
- sio2;
- rigidity;
77.The Potential of High Power Lasers for Tube Cutting and Concrete Scabbling in Nuclear Decommissioning

机译：大功率激光在核退役中用于管子切割和混凝土碎屑的潜力
- 作者：Paul Hilton;Ali Khan
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- lasers;
- concrete scabbling;
- tube cutting;
78.The Electron Beam Cladding Technology

机译：电子束熔覆技术
- 作者：J.He;S.W.Wang;R.H.Zhang
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- electron beam;
- cladding;
- niobium alloy;
- surface modification;
79.Microstructure and Mechanical Properties of SAE9310 Steel Joint by Electron Beam Welding

机译：电子束焊接SAE9310钢接头的组织和力学性能
- 作者：W.Qin;Z.Y.Mao;Y.J.Wang;P.F.Fu
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- sae 9310 steel;
- electron beam welding;
- microstructure;
- mechanical properties;
- fracture analysis;
80.Research on Digitalization of High Frequency Microplasma Arc Welding Machine with Small Welding Current

机译：小电流焊接高频等离子弧焊机的数字化研究
- 作者：J.P.He;C.Huang;F.J.Jiao;Z.C.You
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- digitalization;
- microplasma arc welding machine;
- single-chip processor;
81.Fatigue Crack Propagation Behavior of As-Extruded AZ31B Mg Alloy Welding Joint

机译：挤压态AZ31B镁合金焊接接头的疲劳裂纹扩展行为
- 作者：H.X.Zhang;W.X.Wang;P.Y.Liang;Y.H.Wei;Z.F.Yan;H.Z.Li
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- az31b magnesium alloy;
- welding joint;
- fatigue crack propagation rate;
- brittle fracture;
82.Influences of Laser Powers on Microstructure and Properties of the Al-Si/Al+Al2O3 Coating on the AZ91D Magnesium Alloy

机译：激光功率对AZ91D镁合金上Al-Si / Al + Al2O3涂层的组织和性能的影响
- 作者：J.G.Qian;J.X.Zhang;S.Q.Li;C.Wang;S.L.Gong
- 会议名称：《Proceedings of the 3rd international conference on power beam processing technologies.》 | 2010年
- plasma-sprayed coating;
- mg alloy;
- laser power;