首页>外文会议>Physical and Numerical Simulation of Materials Processing

Physical and Numerical Simulation of Materials Processing

召开年：2007
召开地：Zhengzhou(CN)
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Three-dimensional thermo-mechanical finite element simulation for casting ladle structure under thermal loadings

机译：热载荷下铸钢包结构的三维热力有限元模拟
- 作者：Shouju LI;Yingxi LIU;He YU
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- casting ladle;
- thermo-mechanical loadings;
- thermo-stress;
- finite element method;
- temperature fields;
- thermal properties;
2.Derivation and Application for Time Step Model in Simulation of Solidification Process

机译：凝固过程仿真中时间步长模型的推导与应用
- 作者：Wenbang GONG;Liliang CHEN;Jing HAO
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- casting solidification;
- simulation;
- time step;
- derivation of formula;
3.Experimental Research of Elevated Temperature Creep and Stress Relaxation during Continuous Straightening

机译：连续矫直过程中温度蠕变和应力松弛的实验研究
- 作者：Yuan MAN;Xian-Kui LI;La-Dao YANG
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- continuous casting;
- continuous straightening;
- creep;
- stress relaxation;
4.The computer solidification simulation of oceangoing freighter rudder horn

机译：远洋货船舵角的计算机凝固仿真。
- 作者：Jingpei XIE;Aiqin WANG;Wenyan WANG;Jiwen LI;Huimin ZhANG;Jinling HOU
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- oceangoing freighter;
- rudder horn;
- casting defects;
- solidification simulation;
5.Numerical Simulation of Rheo-diecasting Mould Filling Process of Semisolid Magnesium Alloys

机译：半固态镁合金流变压铸模填充过程的数值模拟
- 作者：YAN Hong;WANG Tao;Fu Mingfu
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- semisolid;
- rheo-diecasting;
- magnesium alloys;
- numerical simulation;
6.Microstructures of rapidly solidified hypereutectic Al-Si alloy with low-titanium content

机译：低钛含量快速凝固的过共晶Al-Si合金的显微组织
- 作者：Aiqin WANG;Jingpei XIE;Zhongxia LIU;Jiwen LI;Wenyan WANG;Shuqing YAN
- 会议名称：《》 | 2008年
- rapid solidification;
- microstructure;
- micro-nanocrystalline grain;
- amorphous;
- polycrystal;
7.Numerical Simulation of Induction Heating Process of Continuous Casting Slab

机译：连铸板坯感应加热过程的数值模拟
- 作者：Hao LIU;Liliang CHEN;Jianxin ZHOU
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- casting slab;
- induction heating;
- finite difference method;
- temperature distribution;
8.Application of Level Set Method to the Simulation of Liquid-gas Two-phase Flow During Mold Filling

机译：水平集方法在充模过程中气液两相流模拟中的应用
- 作者：Jing HAO;Liliang CHEN;Jianxin ZHOU
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- two-phase;
- mold filling;
- level set;
- numerical simulation;
9.Mold Filling Process Control of Molten Aluminum in Permanent Molds with a Web Gating System

机译：卷筒纸浇口系统控制永久铸模中熔融铝的充模过程
- 作者：Qingming Chang;David Schwam;Changjun Chen;Jiulang Xiong;John F.Wallace
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- permanent mold;
- web gating system;
- numerical simulation;
- flow behavior;
- aluminum castings;
10.Simulation of Gas-solid Two-phase Flow to Process of Filling the Foam Mould

机译：气固两相流对泡沫模具填充过程的模拟
- 作者：Junxia JIANG;Zhichao WU;Liliang CHEN
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- lost foam casting;
- foam pattern;
- gas-solid two-phase flow;
- filling process;
- numerical simulation;
11.Gate Location Optimization in Injection Molding Based on Empirical Search Method

机译：基于经验搜索的注塑成型浇口位置优化
- 作者：Xiao-Yan Huang;De-Qun Li;Qiang Xu
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- gate location;
- empirical search method;
- empirical library;
- mathematics modeling;
- numerical example;
12.Thermal Simulation on Mechanical Properties of Steel Q345for Continuous Casting Slab

机译：连铸坯用Q345钢力学性能的热模拟
- 作者：D.F. Chen;L. Huang;M.J. Long;L.Y. Wen;L.Y. Dong
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- continuous casting slab;
- physics simulation;
- strength;
- ductility;
13.Simulation and Investigation on Physical Properties of Continuous Casting Slab AH36 at High Temperature

机译：高温AH36连铸板坯物理性能的模拟研究。
- 作者：M.J. Long;D.F. Chen;C.G. Bai;L. Huang;L.Y. Wen
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- physical property at high temperature;
- steel ah36;
- simulation of continuous casting;
- thermal analysis;
14.Numerical Study of Liquid Core Solidification in Influence of Soft Reduction Deformation on Steel Slab Continuous Casting Process

机译：软还原变形对钢坯连铸过程液核凝固的数值研究
- 作者：J.Luo;X.Lin;Y.H.Ye;K.W.Liu
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- soft reduction;
- liquid core;
- modeling;
- continuous casting;
15.Numerical Study on Mold Filling Process of Casting

机译：铸件充型过程的数值研究
- 作者：Xiao-qiang PAN;Hong-zhu SUN;Jun-da CHEN;Yu-ling ZHU
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- mold filling;
- numerical simulation;
- cfd;
- nht;
- interfacial tracking;
16.Thermal Analysis of Whirling Unit attached to Thread Whirling Machine

机译：螺纹旋压机上旋压单元的热分析
- 作者：Jae-Hwan Son;Young-Moon Lee
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- thread whirling machine;
- worm gear shaft;
- whirling unit;
- thermal stress analysis;
- ansys;
17.Casting Process Simulation of the Ball Milling Machine End Cover with a Hug Diameter

机译：抱磨直径球磨机端盖的铸造过程模拟
- 作者：Wen-yan WANG;Jing-pei XIE;Ji-wen LI;Ai-qin WANG;Luo-li LI;Hua Yan;Hui-min ZHANG
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- end cover of ball milling machine;
- foundry technique;
- solidification simulation;
- casting process simulation;
18.Numerical simulation of die-casting mold filling process by using fractional step method

机译：分步法压铸模具充型过程的数值模拟
- 作者：Jie YANG;Yuxin REN;Shoumei XIONG
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- die casting;
- mold filling;
- numerical simulation;
- fractional step method;
- water analog;
19.A cellular automata model for dendrite structure simulation

机译：用于树突结构模拟的元胞自动机模型
- 作者：Liang YU;Liushun WU;Liaosha LI;Yuanchi DONG
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- dendrite;
- crystal growth;
- cellular automata;
20.Numerical Simulation on the Dendritic Spacing and Microporosity in A356 Alloy Ingot

机译：A356合金铸锭枝晶间距和微孔的数值模拟。
- 作者：Pei Zhang;Fengshan Du;Zhiqiang Xu;Lingling Zhao
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- dendrite arm spacing;
- microporosity;
- gas pore;
- simulation;
- dens degree;
21.Coupled Numerical Simulation on Heat, Flow and Solution Transport in Double-Stream-Pouring Continuous Casting

机译：双流连铸连铸过程中热，流量和固溶传递的耦合数值模拟
- 作者：Weiwen ZHANG;Haidong ZHAO;Jixiang GAO;Yuanyuan LI
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- continuous casting;
- numerical simulation;
22.A New Prediction Way to Shrinkage Cavity Formation for Ductile Iron Castings

机译：球墨铸铁收缩腔形成的新预测方法
- 作者：HOU Hua;ZHANG Guo Wei;MAO Hong Kui;CHENG Jun
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- ductile iron;
- shrinkage cavity;
- eiecam;
- simulation;
23.Microstructure Simulation of Die Casting Magnesium Alloy

机译：压铸镁合金的组织模拟
- 作者：Fu Zhennan;XIONG Shoumei
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- high pressure die casting;
- magnesium alloy;
- microstructure simulation;
- cellular automaton model;
24.The simulation of thermal field in induction melting with cold-crucible and dual frequencies

机译：冷坩埚和双频感应熔炼中的热场模拟
- 作者：Lian Shuang-Shii;Wang I-Hsuan;Ke Jen-Jen
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- simulation, induction melting, cold crucible, dual frequencies;
25.Control of Liquid Level in Tundish of Strip Caster with Automatic Pouring System

机译：自动浇铸系统控制带钢连铸机中间包内的液位
- 作者：Yoshiyuki Noda;Hisaki Watari;Takanori Yamazaki
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- strip caster;
- automatic pouring system;
- modeling;
- liquid level control;
26.Numerical Simulation of Solidified Structure Formation of Al-Si alloy Casting Using Cellular Automaton Method

机译：元胞自动机法铸造铝硅合金凝固组织的数值模拟
- 作者：Kenichi Ohsasa;Kiyotaka Matsuura;Kazuya Kurokawa;Seiichi Watanabe
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- al-si alloy;
- cellular automaton method;
- numerical simulation;
- macrostructure of casting;
27.Material Constants of Ferritic Spheroidal Cast Iron during Hot Deformation

机译：铁素体球铁铸铁热变形时的材料常数
- 作者：Xin ZHAO
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- spheroidal cast iron;
- hot working;
- flow stress;
- activation energy;
28.Numerical Simulation and Experimental Method for Auto-panel Forming Defects Analysis

机译：自动面板成形缺陷分析的数值模拟与实验方法
- 作者：Huiyu XIANG;Chongjie LENG;Yuexian ZHONG
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- sheet metal forming;
- fem;
- material processing;
- automobile body panel;
29.Semi-enclosed Cold Forging Process Analysis and Progressive Die Design of CPU Fin

机译：CPU翅片半封闭式冷锻工艺分析及级进模设计
- 作者：Juan-hua Su;Feng-zhang Ren;Lei Wang
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- cpu fin;
- two stage forging;
- progressive die;
- transfer unit;
- finite element analysis;
30.Numerical Simulation and Structure Optimization of the Main-Control Reversing Valve of Electrical-Hydraulic Hammer

机译：电液锤主控换向阀的数值模拟与结构优化
- 作者：Shiwen DU;Yongtang Ll
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- numerical simulation;
- hydro-finite element;
- cfd;
- electrical-hydraulic hammer;
31.Intelligent Control Experiment Study for V-Shape Free Bending of Wide Sheet Metal

机译：宽板V字型无弯智能控制实验研究
- 作者：Jun ZHAO;Chun-jian SU;Ying-ping GUAN
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- v-shape free bending;
- neural network;
- intellectualization;
32.Forecast of discharge voltage for electromagnetic tube forming based on FEM analysis

机译：基于有限元分析的电磁管成型放电电压预测
- 作者：Haiping YU;Chunfeng LI;Jianghua DENG
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- discharge voltage forecast;
- finite element method;
- design optimization;
- electromagnetic forming;
33.Investigation to the Damage Tolerance of Composite Cylinder for Vehicles by Numerical Simulation

机译：车用复合气缸损伤容忍度的数值模拟研究。
- 作者：XU YANHAI;LI YONGSHENG;HUANG HAIBO
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- composite cylinder;
- cng;
- damage tolerance;
- numerical simulation;
34.Research on closed die forging process of car steering knuckle

机译：汽车转向节闭模锻造工艺研究
- 作者：Deying Zhao;Liandong Zhang;Huixue Sun
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- steering knuckle;
- closed die forging;
- numerical simulation;
- fem pre-forging part;
35.Study on Effect of Extrusion Velocity on Composites Liquid-solid Extrusion Process using 3D Thermo-mechanical Simulation

机译：挤压速度对复合材料液固挤压过程影响的3D热力模拟研究
- 作者：Zhenjun Wang;Lehua Qi;Jiming Zhou
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- extrusion velocity;
- composites;
- liquid-solid extrusion;
- 3d thermo-mechanical fem;
36.Torque strength and influencing factors analysis for assembled camshaft by knurling joining

机译：滚花连接组装凸轮轴的扭矩强度及影响因素分析
- 作者：Jian QIAO;Shuqing KOU;Dongye HE;Shehua YANG
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- assembled camshaft;
- knurling joining;
- torque strength;
- numerical simulation;
37.Study on mechanical behavior for warm extrusion of AZ61 magnesium alloy

机译：AZ61镁合金热挤压力学行为的研究
- 作者：Xing Zhang;Zhi-min Zhang;Bao-cheng Li
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- az61 alloy;
- warm extrusion;
- mechanical behaviour;
38.A RESEARCH ON STEEL SYNCHRONIZER GEAR RING'S PRECISION FORGING

机译：钢同步器齿轮环的精密锻造研究
- 作者：Xue Song;Zhou Jie
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- steel synchronizer gear ring;
- precision forging;
- fem;
39.Researches on rules of the longitudinal residual stress distribution in straightening deformation zone of heavy rail with multi-rollers

机译：多辊重轨矫直变形区纵向残余应力分布规律研究
- 作者：CHEN Lin;TIAN Zhong-liang;GAO Mi-chao;ZONG Wei;WANG Jian-guo;YANG Wen-qing;WANG Ping-yi;WU Zhang-zhong;DUAN Yong-qiang;WANG Yong-ming
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- heavy rail;
- straightening;
- finite element;
- residual stress;
40.The Application on Initial Design of Auto Panel Based on One-step FEM

机译：一步有限元法在汽车面板初始设计中的应用
- 作者：Zhaohu Deng;Yuping Huang;Yanqin Zhang;Feng Ruan
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- one-step fem;
- incremental method;
- blank design;
- plastic total strain theory;
41.Research on Behavior of Slab Surface Defects in Forward Slip Zone during V-H Rolling Process

机译：V-H轧制过程中前滑区板坯表面缺陷行为的研究
- 作者：Hai-liang YU;Xiang-hua LIU;Chang-sheng LI;Li-qing CHEN
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- forward slip;
- crack;
- fem;
42.A Goal Oriented Numerical Simulation Approach for Computing Stress Intensity Factors in Bimaterials

机译：一种面向目标的数值模拟方法，用于计算双材料的应力强度因子
- 作者：Z. C. Xuan;J. W. Peng
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- stress intensity factors;
- bimaterials;
- goal;
- finite elements;
43.Finite Element Analysis of Stress and Strain in Two-wedge Cross Wedge Rolling Step-shaft Part

机译：两楔横楔轧制步进轴零件应力和应变的有限元分析
- 作者：Xidong XING;Xuedao Shu
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- cross wedge rolling;
- strain;
- stress;
- fea;
44.Analysis of hammering deformation processes by the dynamic explicit finite element method

机译：动力显式有限元法分析锤击变形过程
- 作者：Lidong Cheng;Zhongjin Wang
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- hammering;
- dynamic explicit;
- inertial effect;
- stress wave propagation;
45.Study on Flow Stress Model of a Microalloyed High Strength Steel in CSP Hot Rolling

机译：CSP热轧微合金高强度钢的流变应力模型研究
- 作者：Guang XU;Lun WAN;Xinqiang ZHANG;Zhengliang XUE
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- CSP, microalloyed high strength steel, hot simulation test, flow stress model;
46.Thermal-mechanical analysis of metal forming based on meshfree method

机译：基于无网格法的金属成形热力学分析
- 作者：Guang-ru HUA;Hong-yu WEN;Li-qiang AN
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- thermal-mechanical;
- meshfree method;
- metal forming;
- reproducing kernel approximation;
47.Finite Element Analysis of Slab Steel in the Process of Induction Heating

机译：板坯感应加热过程中的有限元分析
- 作者：R B Mei;C S Li;B Han;X H Liu
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- finite element method;
- induction heating;
- induction current;
- temperature distribution;
48.Research on Fast Calculation of Rigid Plasticity Finite Element Method in Hot Strip Rolling

机译：热轧带钢刚性塑性有限元法快速计算研究
- 作者：C S Li;S N Song;R B Mei;G L Zhang;X H Liu
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- finite element method;
- fast finite element;
- arithmetic;
- rolling;
- online calculation;
49.The Finite Element Analysis of Serrated Chip Formation in High-Speed Cutting Auto Panel Dies

机译：高速切削汽车面板模具中锯齿状切屑形成的有限元分析
- 作者：Ruan Jingkui;Ke Yinglin;Yang Yong
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- auto panel dies;
- high-speed cutting;
- finite element method;
- serrated chip;
50.Hot stamping processing experiments of quenchable boron steel

机译：淬火硼钢的热冲压加工实验
- 作者：Jun Bao;Zhongwen Xing;Yuying Yang
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- quenchable boron steel;
- hot stamping;
- bending parts;
- hot stamping process parameters;
51.Research on Cold Taper-Rolling Law of the Spiral Blade Based on Finite Element Method

机译：基于有限元方法的螺旋叶片冷锥滚动规律研究
- 作者：Xiao WANG;Xiaobo FAN;Huixia LIU
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- spiral blade;
- cold rolling;
- taper-rolling;
- finite element method;
52.Finite element analysis of optimum back pressure during equal channel angular pressing

机译：等通道角压过程中最佳背压的有限元分析
- 作者：Feng-jian SHI;Lei-gang WANG
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- equal channel angular pressing;
- finite element analysis;
- back pressure;
- strain distribution;
53.Die Design of a Back Panel for a PDP TV Using 3-D Elasto-plastic Finite Element Analysis

机译：使用3-D弹塑性有限元分析的PDP电视背板模具设计
- 作者：Dong-Gyu;Ahn;Hyun-Soo;Moon
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
54.The contrast research of the finite element simulation for ordinary and fine blanking with negative clearance

机译：具有负游隙的普通和精细落料的有限元模拟的对比研究
- 作者：H. Du;S.M. Ding
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- negative clearance;
- precise blanking;
- simulation;
- parameter;
55.Metal Flow Behavior on the Non-uniform Wall Thickness Three-way Valve Extrusion

机译：壁厚不均匀的三通阀挤压过程中的金属流动行为
- 作者：Cheng Mei;Zhang Zhimin
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- three-way valve;
- multi-dimensional molding;
- numerical simulation;
56.MACROKINETICS HIERARCHIES OF STATES AT DYNAMIC SUPERPLASTICITY

机译：动态超塑性状态下的宏观动力学层次
- 作者：D.A.Kitaeva;Ya.I.Rudaev
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
57.Hot Forging Process Design Optimization Based on Approximate Model and FEM Simulation

机译：基于近似模型和有限元仿真的热锻工艺设计优化
- 作者：Chen Xuewen;Jung Dongwon;Sun Aixue
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- forging;
- approximate model;
- technological parameter;
- numerical simulation;
- design optimization;
58.Qualitative Physical Modeling and Experimental Study on Forging Method With Horizontal V-Shaped Anvil

机译：水平V形砧锻造方法的定性物理建模与实验研究。
- 作者：Liyong Nl;Yongjun Zhang;Suoqing Yu;Zhubai Liu
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- forging;
- horizontal v-shaped anvil;
- axial forging;
- anisotropy;
- textile flow direction;
59.A Method of Bulge Test for Determining the Work Hardening Characteristics of Sheet Metals

机译：确定钣金件加工硬化特性的膨胀试验方法
- 作者：Guangfan Gao;Xinwei Ding
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- bulge test;
- strain hardening characteristics;
- finite element method;
- springback;
- 316l austenite stainless steel;
60.Releasing algorithm for volumetric locking in metal forming process simulation based on element-free Galerkin method

机译：基于无元素Galerkin方法的金属成形过程模拟中的体积锁定释放算法
- 作者：Guan Yanjin;Wu Xin;Zhao Guoqun;Lu Ping
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- metal forming;
- element-free galerkin method;
- volumetric locking;
- pressure oscillation;
61.Key technologies for 3D-FE modeling of radial-axial ring rolling process

机译：径向-轴向环轧工艺的3D-FE建模关键技术
- 作者：LG. Guo;H.Yang
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- radial-axial ring rolling;
- 3d-fe modeling and simulation;
- dynamic explicit procedure;
62.Numerical Simulation and Response Optimizer Design of Strengthening Effects Induced by Laser Shock Peening

机译：激光冲击喷丸强化效果的数值模拟和响应优化设计
- 作者：Shu HUANG;Jian-zhong ZHOU;Yue-qing SUN;Yi-bin CHEN;Su-qin JIANG
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- laser shock peening;
- numerical simulation;
- residual stress;
- surface roughness;
- response optimizer design;
63.Spatial Structure Injection Molding Analysis of Suspended Bio-carriers

机译：悬浮生物载体的空间结构注射成型分析
- 作者：JIANG Fan;CHEN Weiping;LI Yuanyuan
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- suspended bio-carrier;
- spatial structure;
- injection molding analysis;
- numerical simulation;
64.Improvement of Consumer Properties and Stability of the Technological Process of Hot Rod Stock Production

机译：提高热轧棒材生产的消费者性能和工艺过程的稳定性
- 作者：Igor P. Mazur
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- hot rolling mill;
- mechanical properties;
- surface defect;
65.Simulation of Hydroformed High Strength Steel Chassis Parts

机译：液压成形高强度钢底盘零件的仿真
- 作者：Kee Joo Kim;Joo-Sung Kim;Byung-lk Choi;Keun-Hwan Kim;Yeon Sik Kang;Chang Won Sung;Si-Tae Won
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- hydroforming;
- chassis;
- simulation;
- bending;
- thinning;
- cae;
66.Computer simulation of metal forming processes

机译：金属成型过程的计算机模拟
- 作者：K.N. Solomonov;V.P. Abashkin
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
67.A NEW OPTIMIZATION METHOD OF CONSTITUTIVE EQUATION FOR HOT WORKING BASED ON PHYSICAL SIMULATION AND NUMERICAL SIMULATION

机译：基于物理模拟和数值模拟的热工本构方程优化新方法
- 作者：Fuguo LI;Xiaona WANG;Xiaolu YU
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- hot working;
- physical simulation;
- numerical simulation;
- constitutive equation;
- optimization;
68.Process Optimization of Laser Micro-bending Using iSIGHT

机译：使用iSIGHT的激光微弯曲工艺优化
- 作者：Jie Liu;Yanjin Guan;Sheng Sun;Guangchun Wang
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- laser micro-bending;
- finite element method simulation;
- optimization design;
- genetic algorithm;
69.Mechanics Analysis and Numerical Simulation on the Precise Forming Process of Spline Cold Rolling

机译：花键冷轧精密成形过程的力学分析与数值模拟
- 作者：Yongtang Ll;Jianli SONG;Dawei ZHANG;Quangang ZHENG
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- spline;
- cold rolling;
- mechanical analysis;
- numerical simulation;
70.Simulation of Molding Flow of Sheet Molding Compound in Complicated Dies

机译：复杂模具中片状模塑料成型流动的模拟
- 作者：Qilin Mei;Shilin Yan;Zhixiong Huang;Jianjuan Guo
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- sheet molding compound;
- compression flow;
- control volume/finite element method (cv/fem);
- numerical simulation;
71.RESEARCH ON THE INTRAMODE CANNING HOT FORGING PROCESS FOR Mn18Cr18N RETAINING RING

机译：Mn18Cr18N固位环模内罐头热锻工艺研究
- 作者：Jihong TIAN;Jiansheng LIU;Huiguang GUO;Huiqin CHEN
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- mn18cr18n;
- retaining ring;
- intramode canning hot forging process;
72.Finite Element and Experimental Analysis of Three-Dimensional Flow State of Plastic Melt in Slit Die Section

机译：狭缝模头熔体三维流动状态的有限元与实验分析
- 作者：Shengxue QIN;Guoqun ZHAO;Yue MU;Xingming XU
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- finite element;
- extrusion;
- slit die;
- numerical simulation;
- polymer;
73.Temperature Prediction of Seven-pass Finishing Rolling of Hot Thin Strips by FEM

机译：有限元预测热轧薄板七遍精轧温度
- 作者：Zhou-De QU;Qun Zhang;Shi-Hong ZHANG;Chen Lei
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- thin strip;
- finishing rolling;
- fem;
- thermal behavior;
- multi-pass rolling;
74.Research of Favorable Conversion of Friction during Powder Compaction

机译：粉末压实过程中摩擦力良好转化的研究
- 作者：WANG De-guang;WU Yu-cheng;JIAO Ming-hua;XIE Ting;YU Jian-wei
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- powder;
- density;
- fe;
- property;
- compaction;
- friction;
75.Simulation of Three-Dimensional Stress Distribution in Compression Dies

机译：压缩模具中的三维应力分布模拟
- 作者：HUANG chuyun;WANG Saiyu;YANG tao;YAN Xudong
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- stress distribution;
- compression dies;
- simulation;
- photo-elasticity;
76.SIMULATION OF THE FGH96 SUPERALLOY MICROSTRUCTURAL CHANGES UNDER DIFFERENT DEFORMATION CONDITIONS

机译：不同变形条件下FGH96高温合金微观组织变化的模拟
- 作者：Xiaona WANG;Fuguo LI;Yuhong LIU
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- p/m superalloy;
- dynamic recrystallization;
- peak strain;
- critical strain;
- numerical simulation;
77.Investigation into the Warm Extrusion for Micropart with Laser-aided Heating Method

机译：激光辅助加热方法对微型零件的热挤压研究
- 作者：Yun WANG;Zhenying XIT;Peilong DONG;Guoding YUAN;Lan CAI
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- micropart;
- warm extrusion;
- microforming;
- plastic processing;
- laser-aided heating;
78.Strength Analysis of Elastic Bar Based on ANSYS Simulation

机译：基于ANSYS仿真的弹性杆强度分析。
- 作者：Shengnan Wu;Zhiheng Yang;Guangze Dai;Zhenjiang Zhang;Lei;Zhang;Lixin Dong;Liling Liu;Feng He
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- strength analysis;
- elastic bar;
- ansys simulation;
79.Investigation on the Key Technologies of Mechanical Expanding of Large Diameter LSAW Pipe

机译：大口径LSAW管机械扩径关键技术研究
- 作者：Shuhong Xiao;Changli Zha
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- lsaw pipe;
- mechanical expanding;
- numerical simulation;
- rigid mould die expanding;
80.Shrinkage Optimization of Flat Receptacle Using the Finite Element Method

机译：有限元法优化扁形插座的收缩率
- 作者：Zhenying XU;Yun WANG;Peilong DONG;Kai Xiao
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- flat receptacle;
- changeable shrinkage;
- optimization;
- finite element method;
81.Numerical Simulation of Wire-rod Hot Continuous Rolling Process with Multi-field Coupling

机译：多场耦合的线材热连轧过程的数值模拟
- 作者：Licheng YANG;Jinxiang HU;Liwei NING;Yingchun LIU
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- temperature field;
- thermo-mechanical coupling;
- hot continuous rolling;
- 3-d numerical simulation;
82.Investigation of Relationship between Material Flow Direction and Local Stress Field in Plastic Deformation

机译：塑性变形中材料流向与局部应力场关系的研究
- 作者：Ji ZHANG;Zhubin HE;Shijian YUAN
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- material flow;
- stress field;
- maximum mean stress gradient;
- numerical method;
83.Heat-Stress Fields Numerical Simulation of Aluminum Profile Extrusion by Porthole Die

机译：舷窗模具挤压铝型材的热应力场数值模拟
- 作者：Jian ZHANG;Yuntao LI;Liang CHU;Dasen Bl;Hongxiang CUI
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- heat-stress fields;
- numerical simulation;
- porthole die;
- extrusion;
84.A mathmatical approach for modeling real hot forming process using physical simulation results

机译：使用物理模拟结果对实际热成型过程建模的数学方法
- 作者：Zhang Shi-hong;Song Hong-wu;Cheng Ming;Wang Zhong-tang
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- hot forming;
- mathmatical model;
- physical simulation;
- deformation history;
85.Elasto-plastic Dynamic Explicit Analysis of Cold Ring Rolling Process

机译：冷环轧制过程的弹塑性动态显式分析
- 作者：Xuebin Zhang;Zhigang Li;Yuqi Liu;Minghua Wu
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- elasto-plastic;
- dynamic explicit;
- radial return algorithm;
- cold ring rolling;
86.Numerical simulation analysis on cold closed-die forging of differential satellite gear in car

机译：汽车差速器卫星齿轮冷闭模锻造的数值模拟分析
- 作者：Yaozong Zhang;Jianbo Huang;Xue Lin;Quanshui Fang
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- bevel gear;
- cold closed-die forging;
- numerical simulation;
87.Fast Prediction of Springback at Product Design Stage for Sheet Metal Forming

机译：钣金成型产品设计阶段的回弹快速预测
- 作者：Zhibing Zhang;Yuqi Liu;Ting Du;Zhigang Li
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- hybrid method;
- blank design;
- sheet metal forming;
- rotation-free shell;
88.3D Thermal Mechanical Coupled Elasto-plastic Finite Element Analysis in the Whole Rolling Process of H-beam

机译：H型钢整个轧制过程中的3D热力耦合弹塑性有限元分析
- 作者：Zhu Guoming;Kang Yonglin;Chen Wei;Ma Guangting
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- h-beam;
- fem;
- thermo-mechanical;
- whole rolling process;
- temperature;
89.Modeling Stress Strain Curves for Nonlinear Analysis

机译：为非线性分析建模应力应变曲线
- 作者：Husheng Gao
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- stress;
- strain;
- nonlinear analysis;
- modeling;
- ramberg-osgood relation;
90.Rheological Models as the Basic Element of Metal Forming Processes Simulation

机译：流变模型作为金属成形过程仿真的基本要素
- 作者：O.M. Smirnov;M.A. Tsepin
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
91.Deforming Mechanisms of Two-pass Drawing Process of an Aluminum Tube from Circular to Rectangle Section

机译：铝管从圆截面到矩形截面的二次拉伸工艺变形机理
- 作者：Quan Guozheng;Wang Menghan;Zhou Jie;Tong Ying
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- two-pass drawing;
- semi-die angle;
- instability;
- touch-stress;
- residual stress;
92.INVESTIGATION OF THE BILLET DEFORMATION PROCESS IN THE DIES WITH ELASTIC ELEMENTS REALIZING A CROSS AND A LONGITUDINAL SHEAR

机译：具有十字和纵向剪切力的弹性元件模具的铸坯变形过程的研究
- 作者：NAIZABEKOVA.B.;LEZHNEV S.N.
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
93.Numerical Simulation on Pharmaceutical Powder Compaction

机译：药物粉末压实的数值模拟
- 作者：Lianghao Han;James Elliott;Serena Best;Ruth Cameron;A.C. Bentham;A. Mills;G.E. Amidon;B.C. Hancock
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- powder compaction;
- constitutive model;
- finite element method;
- granular material;
94.The Establishment of Mathematics Model of Velocity Field in Strip Cast-rolling Deforment Area

机译：带钢连铸坯区域速度场数学模型的建立
- 作者：Sun Binyu;Yuan Shijian
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- velocity field;
- flow function;
- strip cast-rolling;
- rheological properties;
95.Numerical Simulation on Laser Peen Forming of sheet Metal

机译：钣金激光喷丸成形的数值模拟
- 作者：Jianzhong ZHOU;Yujie Fan;Shu HUANG;Suqin Jiang;Jianjun DU
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- laser peening;
- sheet metal forming;
- residual stress;
- numerical simulation;
96.A 3D Rigid-plastic FEM Simulation on Radius of Incremental In-plane Bending of Strip Metal

机译：带材金属面内弯曲半径的3D刚塑性有限元模拟
- 作者：Tang Wenting;Jin Li;Zhang jin;Yang He
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- incremental in-plane bending;
- 3d fem simulation;
- bending radius;
97.Prediction of Rolling Force during Temper Rolling

机译：回火轧制过程中轧制力的预测
- 作者：J. Larkiola;J. Nylander;V. Kaehkoenen;M. Judin
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- temper rolling;
- skin pass rolling;
- finite element method;
- contact length;
- friction;
98.The innovative production developments in sheet hydroforming

机译：片材液压成型的创新生产发展
- 作者：Lihui Lang;Huili Li;Xianbin Zhou;Joachim Danckert;Yile Ghen
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- sheet hydroforming;
- production;
- numerical simulation;
99.Research on Simulating of Controlled Rolling and Controlled Cooling Process for Mo Micro-alloy Steel

机译：Mo微合金钢控制轧制和控制冷却过程的模拟研究
- 作者：Li guiyan;Zhao baochun;Pang;zaofu;Liu yonghao;Ma huixia
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- mo micro-alloy steel;
- tmcp technology;
- acicular ferrite;
100.Application Research on Expert System of Incremental In-plane Bending

机译：面内增量弯曲专家系统的应用研究
- 作者：Tang Wenting;Tang Chaoli;Huang Lei;Yang He
- 会议名称：《Physical and Numerical Simulation of Materials Processing》 | 2008年
- incremental in-plane bending;
- expert system;
- database;
- visual basic;
- matlab;