首页>外文会议>其他>Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)

Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Features of Materials Engineering RD and Education in Finland after Joining the EU

机译：加入欧盟后芬兰的材料工程研发与教育特色
- 作者：H. Kleemola
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- materials technology;
- innovation structure;
- EU research;
- finnish technological infrastructure;
2.The sodium transport in polycrystalline alumina

机译：钠在多晶氧化铝中的迁移
- 作者：H. Lovas;V. K. Josepovits;Z. Toth;M. Toth
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- HPS lamp;
- polycrystalline alumina;
- discharge tube;
- sodium loss;
- XPS;
- SIMS;
- diffusion;
3.Developing mechanical properties and electrical conductivity of Cu alloys by Jominy end-quench test

机译：通过Jominy淬火试验开发Cu合金的机械性能和导电性
- 作者：V. Ronto;E. Nagy;M. Sveda;K. Tomolya;F. Varga;B. Molnar
- 会议名称：《》 | 2007年
- Cu-alloys;
- mechanical properties;
- electrical conductivity;
- precipitation hardening;
4.Laboratory Experiments for Studying the Surface Preparation and Annealing Processes before Continuous Hot Dip Galvanizing

机译：连续热浸镀锌前表面处理和退火工艺研究的室内实验
- 作者：Eva Denes;Anna Fauszt;Laszlo Kopasz;Peter Toeroek;Balazs Veroe
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- hot dip galvanizing;
- thermal cleaning;
- annealing;
5.Carbon Nanotubes as Ceramic Matrix Reinforcements

机译：碳纳米管作为陶瓷基体增强材料
- 作者：Csaba Balazsi;Zsolt Czigany;Ferenc Weber;Zsuzsanna Koever;Zoltan Konya;Zofia Vertesy;Laszlo Peter Biro;Imre Kiricsi;Peter Arato
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- carbon nanotube;
- silicon nitride;
- ceramic matrix composites;
6.Preparation and characterisation of WO_3.1/3H_2O thin films

机译：WO_3.1 / 3H_2O薄膜的制备与表征
- 作者：Csaba Balazsi;Esra Oezkan Zayim
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- tungsten oxide hydrates;
- nanograins;
- thin films;
- ion insertion;
7.MAgPP an Effective Coupling Agent in Rice Husk Flour Filled Polypropylene Composites

机译：MAgPP是稻壳粉填充聚丙烯复合材料中的有效偶联剂
- 作者：Gyoergy Czel;Zoltan Kanyok
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
8.Development of composite structures for ballistic protection

机译：开发用于防弹的复合结构
- 作者：Gabriella Faur-Csukat
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- composites;
- ballistic performance;
- impact test;
- ballistic test;
9.Influences of Manufacturing Technology on the Mechanical Properties of Silicone Rubber Structures

机译：制造工艺对硅橡胶结构力学性能的影响
- 作者：Jozsef Keskeny;Antal Huba
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
10.Study on the production of metal matrix composite layer by laser melt injection technology

机译：激光熔喷技术生产金属基复合层的研究
- 作者：Viktoria Jano
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- iaser technology;
- in-situ metal matrix composite;
11.Production and Examination of Double Composites

机译：双重复合材料的生产和检验
- 作者：Imre Kientzl;Janos Dobranszky
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- metal matrix composite;
- double composite;
- composite wire;
- thermal aging;
- mechanical tests;
12.Investigation of the debonding process in wood fiber reinforced polymer composites by acoustic emission

机译：木纤维增强聚合物复合材料的声发射脱胶过程研究
- 作者：Z. Kocsis;T. Czigany
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- wood fiber;
- acoustic emission;
- polymer composite;
- debonding;
13.Hydroxamic Acid Corrosion Inhibitor for Steel in Aqueous Solution

机译：水溶液中钢的异羟肟酸缓蚀剂
- 作者：Abdulmajed Alagta;Nona Felhoesi;Erika Kalman
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- corrosion inhibitors;
- dihydroxamic acid;
- ac impedance;
- adsorption;
14.The Role of Niobium in Lightweight Vehicle Construction

机译：铌在轻型车辆制造中的作用
- 作者：Hardy Mohrbacher;Christian Klinkenberg
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- niobium microalloying;
- microstructure;
- formability;
- weldability;
15.The state of differently heat-treated 12 Ni maraging steel after laser remelting

机译：激光重熔后热处理不同的12％Ni马氏体时效钢的状态
- 作者：Janez Grum;Janez Marko Slabe
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- laser remelting;
- maraging steel;
- microstructure;
- microhardness;
- residual stresses;
16.Laser Shock Processing of the Maraging Steel Surface

机译：马氏体时效钢表面的激光冲击处理
- 作者：J. Grum;M. Zupancic;J. L. Ocana
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- laser shock processing;
- maraging steel;
- residual stresses;
- roughness;
17.Choosing a Laser-cutting Technology to be Applied to a Deep-drawn Product

机译：选择要应用于深冲产品的激光切割技术
- 作者：Janez Grum;Tomaz Kek
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- laser cutting;
- deep drawing;
- residual stresses;
- hole drilling method;
- strain;
18.Study of the Tempcore Process for the Production of High Resistance Reinforcing Rods

机译：生产高强度钢筋的Tempcore工艺研究
- 作者：O. Nino;D. Martinez;C. Lizcano;M. Guerrero-Mata;R. Colas
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- tempcore process;
- finite element modelling;
- mechanical properties;
- phase transformation;
19.Mechanical Testing of Tendon

机译：肌腱的机械测试
- 作者：Laszlo Molnar;Enikoe Solti;Attila Bojtos;Antal Huba
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- human tendon;
- uniaxial tension test;
20.Welding Investigations of Modern High Strength Dual Phase and TRIP - steel for Automotive Industry application

机译：现代高强度双相和TRIP钢在汽车工业中的焊接研究
- 作者：Orosz Cs.;Palotas B.;Dobranszky J.
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- high strength steel;
- dual phase;
- TRIP - steel;
- weldability;
- TIG welding;
- MAG welding;
- resistant spot welding;
21.Virtual TTT Diagrams Generated by Multi-linear Regression Analysis

机译：通过多线性回归分析生成虚拟TTT图
- 作者：Zoltan Dudas
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- phase transformation;
- 25 CrMo 4 steel;
- 34 CrMo 4 steel;
- 42 CrMo 4 steel;
- TTT diagram;
- FEM method;
- phase element;
- multiple regression;
22.Wear Analysis of Functionally Gradient Composite Materials by FE Modeling of Microhardness Measurements and Wear Tests

机译：通过微观硬度测量和磨损测试的有限元建模对功能梯度复合材料进行磨损分析
- 作者：David Felhoes;Karoly Varadi;Klaus Friedrich
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- microhardness test;
- wear test;
- SEM;
- functionally graded material;
- FE analysis;
23.Examination of the Orientation Relationships between the Main Phases of Duplex Stainless Steel by EBSD

机译：用EBSD检验双相不锈钢主相之间的取向关系
- 作者：Tibor Berecz;Peter J. Szabo
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- duplex stainless steel;
- austenite;
- ferrit;
- sigma-phase;
- EBSD;
24.Damage Analysis of Heat Resistant Steels

机译：耐热钢的损伤分析
- 作者：Tamas BiRO;Laszlo DEVENYI
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- damage;
- creep;
- void nucleation;
- grain boundary;
- microscopy;
- replica;
25.Investigation of Coated Coronary Stents

机译：冠状动脉覆膜支架的研究
- 作者：Eszter Bognar;Gyorgy Ring;Janos Dobranszky
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- coronary stent;
- passive coating;
- active coating;
- expansion properties;
- recoil;
- surface failures;
26.Characterization and comparison of rapidly solidified Al particles, mechanically milled nanostructures and their consolidated structures made by high energy rate forming (HERF) technique

机译：通过高能率成型（HERF）技术制成的快速凝固Al颗粒，机械研磨的纳米结构及其固结结构的表征和比较
- 作者：Agnes Csanady;Laszlo lpacs;Gyula Kakuk;Erika Kalman;Peter M. Nagy;Katalin Papp;Istvan Sajo;Andras Szalay
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- Al flake;
- high energy mechanical milling;
- high energy rate forming;
- nano powders;
- nanocomposites Al-4.5w Cu -10wAI_2O_3;
- AI-15wPb;
- XRD;
- SEM;
- TEM;
- nano indentation;
27.3D Characterization of Continuously Cast Slabs

机译：连铸板坯的3D表征
- 作者：Mihaly REGER;Balazs VEROe;Arpad SZELIG
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- steel;
- continuous casting;
- modeling;
- macrosegregation;
- CET;
28.On the Topological Characterization of 3-D Polyhedral Microstructures

机译：3-D多面体微观结构的拓扑表征
- 作者：Tamas Reti;Agnes Csizmazia;Imre Felde
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- topological indices;
- space filling cellular system;
- quasi-convex polyhedra;
29.Development of scrap evaluation algorithm to optimize the converter charge composition

机译：开发废料评估算法以优化转炉炉料组成
- 作者：Z.Taszner;A.Ender;O.Grega
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- converter steelmaking;
- optimization;
- statistical methods;
- accompanying elements;
- scrap composition;
30.Coronary Stents' Materials and Examinations of Surface and Expansion Features

机译：冠状动脉支架的材料以及表面和扩展特征的检查
- 作者：Gy. Ring;E. Bognar;J. Dobranszky
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- coronary stent;
- expansion features;
- foreshortening;
- recoil;
- surface failures;
31.Metallographic Investigation of TRIP Steels

机译：TRIP钢的金相研究
- 作者：A. Takacs-Szabo;B. Vero;J. Solyom
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- residual austenite;
- colour etching;
- computer image analysis;
- X-ray diffraction;
32.Main Aspects at the Design and Loading Test of Large Scale Trusses to Achieve a Reasonable Structural Safety

机译：为实现合理的结构安全性而进行的大型桁架设计和载荷测试的主要方面
- 作者：Istvan Bagi;Pal Tomka
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- trusses;
- design;
- loading test;
- towers;
33.The effect of microstructure on the wear phenomena

机译：微观结构对磨损现象的影响
- 作者：T. Kovacs;L. Devenyi
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- wear;
- microstructure;
- wear tests;
34.Evolution of Special Grain Boundaries in Austenitic Steels

机译：奥氏体钢中特殊晶界的演变
- 作者：Z. Gaal;P. J. Szabo
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- CSL;
- special boundaries;
- EBSD;
- austenitic steel;
- SUS 304;
- SUS304L;
- SUS 316;
- cold forming;
35.Temperature dependence of Barkhausen noise parameters in carbon steel

机译：碳钢中巴克豪森噪声参数的温度依赖性
- 作者：L.Harasztosi;L.Daroczi;I.A.Szabo;Z.Balogh;D.L.Beke
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- magnetic barkhausen noise;
- temperature dependence;
- self-organized criticality;
- ductile-brittle transition;
36.Determining the anisotropy coefficients of an ultra fine grained AI6082 alloy subjected to ECAP

机译：确定经过ECAP的超细晶粒AI6082合金的各向异性系数
- 作者：Gyorgy Krallics;Arpad Fodor
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- ECAP;
- AI6082 alloy;
- upsetting test;
- anisotropic yield criteria;
- anisotropy coefficients;
- equivalent stress-equivalent strain curve;
37.Pulse plated amorphous Fe-P thin layers for high frequency magnetic applications

机译：用于高频磁性应用的脉冲镀非晶Fe-P薄层
- 作者：A. Miko;M. Takacs;M. Lakatos-Varsanyi;L.K. Varga
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- pulse electrodeposition;
- Fe-P thin layers;
- XRD;
- magnetic hysteresis loops;
- initial permeability;
38.Formation and Structure of Alkyl-Phosphonic Acid Layers on Passive Iron

机译：被动铁上烷基膦酸层的形成与结构
- 作者：A. Paszternak;I. Felhoesi;Zs. Keresztes;E. Kalman
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- surface modification;
- thin layers;
- passive iron;
- phosphonicacid;
- corrosion protection;
39.The corrosion study of ZrO_2 coatings on metals

机译：ZrO_2涂层在金属上的腐蚀研究。
- 作者：Ioana ROTARIU;Graziella L. TURDEAN;Fiammetta KORMOS;Dan MACAROVICI;Gyula TOLNAI;Nona FELHOSI;Peter NAGY;Laszlo TRIF;Erika KALMAN
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- ZrO_2;
- sol-gel coatings;
- corrosion;
- carbon steel;
- copper;
40.Surface Modification of Polyethylene by Nitrogen PIII: Surface Chemical and Nanomechanical Properties

机译：氮PIII对聚乙烯的表面改性：表面化学和纳米力学性能
- 作者：A. Toth;I. Bertoti;M. Mohai;T. Ujvari
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- ultra-high molecular weight polyethylene;
- plasma immersion ion implantation;
- XPS;
- nanomechanical properties;
41.AFM Investigation of Steel Surfaces Worn in HFRR Tests

机译：HFRR测试中磨损的钢表面的AFM研究
- 作者：D. Aranyi;P. M. Nagy;Zs. Olah;E. Kalman
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- diesel fuel;
- lubrication;
- additives;
- HFRR;
- wear;
- AFM;
- steal;
- morphology;
42.Barkhausen noise measurements in amorphous and nanocrystalline FINEMET type alloys

机译：非晶和纳米晶FINEMET型合金的巴克豪森噪声测量
- 作者：Z.Balogh;L.Daroczi;Z.Erdelyi;S.Szabo;R.Juhasz;D.LBeke
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- amorphous;
- nanocrystalline;
- barkhausen noise;
- self-organized criticality;
- soft magnetic materials;
43.Hydrogen in The Plastic Deformed Steel

机译：塑料变形钢中的氢
- 作者：Enikoe- Reka Fabian;Laszlo Devenyi
- 会议名称：《》 | 2007年
- Al-killed low carbon enamel-grade steel sheet;
- cold rolling;
- hydrogen transmissibility;
- microstructure;
44.Fatigue Behaviour of Railway Wheel Steels under Constant and Variable Amplitude Loading

机译：恒定和可变振幅载荷下铁路车轮钢的疲劳行为
- 作者：F. Walther;D. Eifler
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
45.The experiences of activated tungsten inert gas (ATIG) welding applied on 1.4301 type stainless steel plates

机译：在1.4301型不锈钢板上应用活性钨极惰性气体（ATIG）焊接的经验
- 作者：T. Sandor;Janos Dobranszky
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- ATIG welding;
- penetration;
- marangoni-effect;
- electric arc;
- activating fluxes;
46.Color Etching for Characterization the Grain Orientation in Spheroidal Graphite Cast Iron

机译：彩色蚀刻表征球墨铸铁中晶粒取向
- 作者：I. Kardos;Z. Gacsi;P. J. Szabo
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- spheroidal graphite cast iron;
- color etching;
- orientation;
- EBSD;
47.Supercapacitor Electrodes Made from Mixture of Amorphous Carbon Nano-Particles and Carbon Black

机译：由非晶碳纳米粒子和炭黑混合制成的超级电容器电极
- 作者：S. Toth;M. Fuele;M. Veres;I.Pocsik;M. Koos
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- carbon;
- amorphous materials;
- capacitors;
- galvanometric properties;
48.Fluid Mechanical Model for Formation of Mineral Wool Fibers Applied in Polymer Composites

机译：聚合物复合材料中矿棉纤维形成的流体力学模型
- 作者：Janos VAD;Balint MORLIN
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
49.Raman analysis of diamond-like carbon films deposited onto corrosion resistant alloys used for coronary stent fabrication

机译：沉积在用于冠状动脉支架制造的耐腐蚀合金上的类金刚石碳膜的拉曼分析
- 作者：M. Veres;S. Toth;M. Fuele;J. Dobranszky;L. Major;M. Koos
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- diamond-like carbon;
- including carbon nitride;
- biomedical applications;
- raman spectroscopy;
- plasma CVD;
50.Development of self-supporting polycrystalline diamond bridge

机译：自支撑多晶金刚石桥的研制
- 作者：H.K.Csorbai;G. Kovach;P. Furjes;P. Csikvari;A. Solyom;G. Hars;E. Kalman
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- diamond;
- micromechanics;
- CVD;
51.High Elasticity Strain Gauge Made from Conductive Silicone Rubber

机译：导电硅橡胶制成的高弹性应变计
- 作者：Laszlo Valenta;Antal Huba;Istvan Muka
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- silicone elastomeres;
- conductive silicone rubber;
- high elasticity strain gauge;
52.Crystallization of Fe-Ni Based Amorphous Alloy

机译：Fe-Ni基非晶合金的结晶
- 作者：Dora Janovszky;Jenoe Solyom;Andras Roosz;Zsolt Czigany
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- amorphous alloy;
- crystallization, DSC;
53.Dispersibility of Carbon Nanotubes

机译：碳纳米管的分散性
- 作者：T. Gabor;D. Aranyi;K. Papp;F. H. Karman;E. Kalman
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- carbon nanotube;
- dispersibility;
- suspension;
- dispersion agent;
- surfactant;
- relative permittivity;
54.Precipitation microstructure of ultrafine-grained Al-Zn-Mg alloys processed by severe plastic deformation

机译：严重塑性变形处理的超细晶粒Al-Zn-Mg合金的析出显微组织
- 作者：J. Gubicza;I. Schiller;N. Q. Chinh;J. Illy
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
55.The EAF Slag as Construction Material

机译：电炉渣作为建筑材料
- 作者：Robert Markus;Oszkar Grega
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- EAF slag treatment;
- CLEAN-BED technology;
- environmental effects;
- solute Ba and Cr;
- slag utilization;
56.On the Temperature Rate Dependent Transformation Processes

机译：关于温度速率依赖的转化过程
- 作者：Tamas Reti;Imre Czinege;Imre Felde;Lino Costa;Rafael Colas
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- kinetic model;
- isokinetic transformations;
- activation energy;
- laser surface hardening;
57.Simulation of 3-Dimensional Cell Population Growth Processes in Polyhedral Cellular Systems

机译：多面体细胞系统中三维细胞群体生长过程的模拟
- 作者：Tamas Reti;Ibolya Zsoldos
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- cell complex;
- space-filling polyhedra;
- plesiohedron;
- stereohedra;
- froths;
58.Visualisation of the Melt Flow under Rotating Magnetic Field

机译：旋转磁场下熔体流动的可视化
- 作者：Arnold Ronafoeldi;Jenoe Kovacs;Andras Roosz
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
59.Thermal and Metallurgical Modelling of Laser Transformation Hardened Steel Parts

机译：激光相变硬化钢零件的热学和冶金学建模
- 作者：R. Rowshan;M. Kocsis Baan
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- laser transformation hardening;
- finite element model;
- austenisation;
- phase transformation;
- overlapping;
60.Evaluation of Steel Hardenability by JM~reg;-test

机译：通过JM〜®测试评估钢的淬透性
- 作者：B. Smoljan;D. lljkic;N. Tomasic;I. Felde;G.E. Totten;T. Reti
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- quenching;
- computer simulation;
- high-hardenability tool steels;
61.Numerical Analysis of Sliding Friction Behavior of Rubber

机译：橡胶滑动摩擦行为的数值分析
- 作者：E. Soos;T. Goda
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- asperity;
- hysteresis;
- rubber;
- finite element analysis;
- sliding friction;
62.Functionalization of multi-walled carbon nanotubes

机译：多壁碳纳米管的功能化
- 作者：A. Gergely;J. Telegdi;E. Kalman
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- modification of carbon nanotubes;
- diels-alder and sand-meyer reaction;
- catalytic oxidation;
63.Development and Manufacturing of Coronary Stents in Hungary

机译：在匈牙利开发和制造冠状动脉支架
- 作者：Janos Ginsztler;Laszlo Major;Zsolt Puskas;Margit Koos;Janos Dobranszky;Michael Giese;Barnabas Szabo;Katalin Albrecht
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- stent;
- biocompatibility;
- laser cutting;
- electropolishing;
- carbon coating;
64.ON THE WETTABILITY, ENCAPSULATION AND SURFACE PHASE TRANSITION IN MONOTECTIC LIQUID METALLIC SYSTEMS

机译：单晶液态金属系统的润湿性，包封性和表面相变
- 作者：G.Kaptay
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- liquid metals;
- monotectic systems;
- Al-Pb;
- Al-Bi;
- Al-Cd, Al-In;
- wettability;
- encapsulation;
- surface phase transition;
65.Long-term Strain Measuring of Technical Textiles by Photographic Method

机译：摄影方法对工业用纺织品进行长期应变测量
- 作者：HEGYI;Dezsoe;SAJTOS;Istvan;SANDOR;Gyoergy
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- textile composites;
- creep;
- measuring techniques;
- shape functions;
66.THERMAL SHOCK FATIGUE PROCESS INDUCED MAGNETIC ANISOTROPY

机译：热冲击疲劳过程诱发的磁各向异性
- 作者：Istvan Meszaros;Janos Ginsztler
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
67.Prediction of Fullerene Stability Using Topological Descriptors

机译：使用拓扑描述符预测富勒烯稳定性
- 作者：Tamas Reti;Enikoe Bitay
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- polyhedral graph;
- combinatorial curvature;
- buckminster fullerene;
68.COMPARISON OF DIFFERENT THEORETICAL MODELS TO EXPERIMENTAL DATA ON VISCOSITY OF BINARY LIQUID ALLOYS

机译：不同理论模型与二元合金黏度实验数据的比较
- 作者：I.Budai;M.Z.Benkoe;G.Kaptay
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- viscosity;
- liquid metals;
- binary alloys;
- models;
69.Comparison of Measured Phase Volumes with Calculated ones Created by TTT-CCT Diagram Transformation

机译：通过TTT-CCT图变换创建的测量相体积与计算相体积的比较
- 作者：Z. Dudas
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- phase transformation;
- 42 CrMo 4 steel;
- TTT diagram;
- CCT diagram;
- star-like cooling;
- FEM method;
- phase element;
70.A Novel Approach of Quenchant Evaluation by Applying Quality Functions

机译：应用质量函数的猝灭评估新方法
- 作者：I. Felde;I. Czinege;B. Smoljan;R. Colas
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- quenchant evaluation;
- heat treatment;
- simulation;
- inverse heat conduction problem;
- property prediction;
71.Changes of subsurface structure of materials developed during sliding friction

机译：滑动摩擦过程中材料表面结构的变化
- 作者：P. Bollok;M. Kozma
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- pin-on-disk machine;
- sliding friction;
- tribologically transformed layers;
- second phase;
- plastic-deformation;
- work-hardening;
72.Aperiodic Deformation Occurring as a Result of Thermoplastic Instability of Metals

机译：金属的热塑性不稳定性导致非周期性变形
- 作者：Zoltan Palmai
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- machining;
- chaos;
- nonlinearity;
- constitutive equation;
- thermoplastic instability;
73.Intercritical Interrupted Jominy Test

机译：临界间干扰测试
- 作者：Mihaly REGER;Balazs VEROe;Zsolt CSEPELI;Peter PINKE
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- intercritical annealing;
- jominy end quench method;
- modeling;
- DP;
- TRIP;
74.Characterisation of solid supported nanostructured thin films by scanning angle reflectometry and UV-Vis spectrometry

机译：固体支撑的纳米结构薄膜的特征在于扫描角反射法和紫外可见光谱法
- 作者：Andras Deak;Erzsebet Hild;Attila L. Kovacs;Zoltan Horvoelgyi
- 会议名称：《》 | 2007年
- stober silica;
- langmuir-blodgett films;
- scanning angle reflectometry;
- UV-Vis spectroscopy;
75.Replacement of imported drawn tubes built in heat exchangers by longitudinal seam pipes produced by DUNAFERR

机译：用DUNAFERR生产的纵向接缝管代替内置在热交换器中的进口拉管
- 作者：Eva Denes;Piroska Fueloep;Judit Gergely;Ferenc Menyhart;Sandor Toth;Gabor Buza;Balazs Veroe
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- enamelling steel sheet;
- laser welding;
- HR-resistance welding;
- longitudinal seam pipe;
76.The Effect of the Compression on the Mechanical Properties of Wood Material

机译：压缩对木材力学性能的影响
- 作者：Laszlo Kuzsella;Imre Szabo
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- hardwood;
- wood compression;
- bending strength of woods;
77.Micro Structural Aspects of Unstable Crack Propagation in Ferritic Steels

机译：铁素体钢不稳定裂纹扩展的微观结构
- 作者：Peter Trampus
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- ductile-to-brittle transition;
- cleavage fracture;
- fracture toughness;
- local approach;
- microstructure;
- and irradiation embrittlement;
78.Investigation of Ageing Phenomena in CuAINi Based Shape Memory Alloys

机译：CuAINi基形状记忆合金的时效现象研究
- 作者：M.Benke;V.Mertinger;E.Nagy;Jan Van Humbeeck
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- shape memory alloy;
- thermoelastic martensitic transformation;
- ageing;
79.High Performance Microcoulometry

机译：高性能微库仑法
- 作者：Roland Muranyi;Tamas Cserfalvi
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- microcoulometry;
- halogen determination;
80.DEVELOPMENT OF A NOVEL VIBRATING SAMPLE MAGNETOMETER

机译：新型振动样品磁表的研制
- 作者：Istvan Meszaros
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- vibrating sample magnetometer;
- VSM;
- magnetic characterization;
- magnetic laboratory equipment;
81.Fatigue Properties of Welded joints of High-Carbon Steels

机译：高碳钢焊接接头的疲劳性能
- 作者：A. Magasdi;J. Dobranszky;F. Tusz;J. Ginsztler
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- fatigue;
- weld joints;
- high-carbon steel;
- post-weld heat treatment;
- MIG;
82.Relationship between bending modulus and test sizes of laminated glass/polyester composites

机译：夹层玻璃/聚酯复合材料的弯曲模量与测试尺寸之间的关系
- 作者：Z. L. Simon;L. M. Vas
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- woven glass reinforced composite;
- three point bending test;
- span-to-thickness ratio;
- bending modulus;
83.Analysis of adobe-clay as an envorinmental-friendly stuctural material

机译：土坯土作为环保结构材料的分析
- 作者：O. Csicsely Agnes;Jozsa Zsuzsanna;Sajtos Istvan
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- adobe-clay brick;
- drying shrinkage;
- compressive strength test;
84.Actual Feed Rate per Tooth at Micro Milling

机译：微铣削时每齿的实际进给速度
- 作者：Marton Takacs;Balazs Veroe
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- micro end milling;
- actual feed rate per tooth;
- minimal chip thickness;
85.Microstructure and Abrasive Wear Studies of Laser Clad Al-Si/SiC Composite Coatings

机译：激光熔覆Al-Si / SiC复合涂层的显微组织和磨粒磨损研究
- 作者：Anandkumar R;R. Colago;V. Ocelik;J.Th.M. De Hosson;R. Vilar
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- abrasive wear;
- Al-Si/SiC matrix composites;
- laser cladding;
86.Examination of Calcium-Phosphates Prepared from Eggshell

机译：蛋壳制得的磷酸钙的检查
- 作者：Csaba Balazsi;Zsuzsanna Koever;Enikoe Horvath;Csaba Nemeth;Zsolt Kasztovszky;Sandor Kurunczi;Ferenc Weber
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- eggshell;
- calcium phophates;
- hydroxyapatite;
- nanograins;
- biocomposites;
87.High Performance Self-Reinforced Polypropylene Composites

机译：高性能自增强聚丙烯复合材料
- 作者：Tamas Barany;Andras lzer;Tibor Czigany
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- self-reinforced polypropylene composite;
- consolidation;
- interlaminar strength;
88.Effect of divalent cations in Langmuir-Blodgett films on the protection of copper against corrosion

机译：Langmuir-Blodgett膜中的二价阳离子对铜防腐蚀的影响
- 作者：F. Al-Taher;J. Telegdi;E. Kalman
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- langmuir-blodgett films;
- hydroxamic acid;
- divalent cations;
- atomic force microscopy;
- nanocoating;
89.Relationship between the primary cast structure and distribution of inclusions in a St52-3 type continuously cast steel slab

机译：St52-3型连铸坯中一次铸造组织与夹杂物分布的关系
- 作者：Gabor Fehervari;Balazs Veroe;Ibolya Kardos;Zsolt Csepeli
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- steel;
- continuous steel casting;
- slab;
- inclusions;
- solidification;
- solid shell formation;
- peritectic reaction;
- macrosegregation;
- quantitative image analysis;
- sulphur print;
90.Effect of Cladding on the Reactor Pressure Vessel Safety

机译：熔覆对反应堆压力容器安全性的影响
- 作者：Gyoergy Andras Gemes
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- energetics;
- reactor safety;
- extension operational lifetime;
91.THIN FILM CARBON LAYERS WITH CONTINOUSLY CHANGING BONDING PROPERTIES

机译：具有连续变化的粘结性能的薄膜碳层
- 作者：G.Kovach;G.Petoe;A.Karacs;M. Veres;H. Csorbai;A. Solyom
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- carbon;
- diamond-like carbon;
- pulsed laser deposition;
- electron energy loss spectroscopy;
92.Mechanical investigation of hemp fiber reinforced polypropylene with different types of MAPP compatibilizer

机译：麻纤维增强聚丙烯与不同类型MAPP增容剂的力学研究
- 作者：Zoltan Mezey;Tibor Czigany
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2007年
- hemp fiber;
- mechanical properties;
- maleic anhydride grafted polypropylene;
- fiber/matrix adhesion;
93.Metallographic Investigation of TRIP Steels

机译：TRIP钢的金相研究
- 作者：A. Takacs-Szabo;B. Vero;J. Solyom
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2005年
- residual austenite;
- colour etching;
- computer image analysis;
- X-ray diffraction;
94.COMPARISON OF DIFFERENT THEORETICAL MODELS TO EXPERIMENTAL DATA ON VISCOSITY OF BINARY LIQUID ALLOYS

机译：不同理论模型与二元合金黏度实验数据的比较
- 作者：I.Budai;M.Z.Benkoe;G.Kaptay
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2005年
- viscosity;
- liquid metals;
- binary alloys;
- models;
95.Features of Materials Engineering RD and Education in Finland after Joining the EU

机译：加入欧盟后芬兰的材料工程研发与教育特色
- 作者：H. Kleemola
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2005年
- materials technology;
- innovation structure;
- EU research;
- finnish technological infrastructure;
96.Wear Analysis of Functionally Gradient Composite Materials by FE Modeling of Microhardness Measurements and Wear Tests

机译：通过微观硬度测量和磨损测试的有限元建模对功能梯度复合材料进行磨损分析
- 作者：David Felhoes;Karoly Varadi;Klaus Friedrich
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2005年
- microhardness test;
- wear test;
- SEM;
- functionally graded material;
- FE analysis;
97.Study of the Tempcore Process for the Production of High Resistance Reinforcing Rods

机译：生产高强度钢筋的Tempcore工艺研究
- 作者：O. Nino;D. Martinez;C. Lizcano;M. Guerrero-Mata;R. Colas
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2005年
- tempcore process;
- finite element modelling;
- mechanical properties;
- phase transformation;
98.Supercapacitor Electrodes Made from Mixture of Amorphous Carbon Nano-Particles and Carbon Black

机译：由非晶碳纳米粒子和炭黑混合制成的超级电容器电极
- 作者：S. Toth;M. Fuele;M. Veres;I.Pocsik;M. Koos
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2005年
- carbon;
- amorphous materials;
- capacitors;
- galvanometric properties;
99.The Role of Niobium in Lightweight Vehicle Construction

机译：铌在轻型车辆制造中的作用
- 作者：Hardy Mohrbacher;Christian Klinkenberg
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2005年
- niobium microalloying;
- microstructure;
- formability;
- weldability;
100.The state of differently heat-treated 12 Ni maraging steel after laser remelting

机译：激光重熔后热处理不同的12％Ni马氏体时效钢的状态
- 作者：Janez Grum;Janez Marko Slabe
- 会议名称：《Hungarian Conference on Materials Science, Testing and Informatics; 20051009-11; Balatonfured(HU)》 | 2005年
- laser remelting;
- maraging steel;
- microstructure;
- microhardness;
- residual stresses;