首页>外文会议>IFTOMM Asian conference on mechanism and machine science

IFTOMM Asian conference on mechanism and machine science

召开年：2016
召开地：Guangzhou(CN)
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.A Deploy able Robot Based on the Bricard Linkage

机译：基于Bricard链接的可部署机器人
- 作者：Hao Shang;Dawei Wei;Rongjie Kang;Yan Chen
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Threefold-symmetric bricard linkage;
- Deployable robot;
- Gait control;
2.Configuration Design and Kinematics Research of Scissor Unit Deployable Mechanism

机译：剪式单元可展开机构的结构设计与运动学研究
- 作者：Jianfeng Li;Sanmin Wang;Changjian Zhi;Yuantao Sun
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
3.The Design and Simulation of a New Time-Controlled Spring Driven Hinge for Deployable Structures

机译：新型可伸缩结构时控弹簧驱动铰链的设计与仿真
- 作者：Qian Peng;Sanmin Wang;Changjian Zhi
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Time-controlled spring driven hinge;
- Design;
- Simulation;
4.The Configuration Design and Kinematic Analysis of the Deployable Mechanism Based on Bennett Linkage

机译：基于Bennett连杆机构的可展开机构的配置设计和运动学分析
- 作者：Changjian Zhi;Sanmin Wang;Jianfeng Li;Qian Peng
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Bennett linkage;
- Deployable mechanism;
- Configuration design;
- The coordinate transformation theory;
- Kinematics;
5.Design and Analysis of the Scissors Double-Ring Truss Deployable Antenna Mechanism

机译：剪刀双环桁架可展开天线机构的设计与分析
- 作者：Bo Han;Yundou Xu;Jiantao Yao;Wenlan Liu;Xiangbin Li;Yongsheng Zhao
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Scissors;
- Double-ring truss;
- Deployable antenna;
- Screw theory;
6.Deployable Mechanism Design for Span Morphing Wing Aircraft

机译：跨距变翼飞机的可展开机构设计
- 作者：Binbin Gao;Rongjie Kang;Yan Chen
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
7.Kinematics and Singularity of a 4-DOF Parallel Mechanism with Passive Spherical Joints

机译：具有被动球形接头的四自由度并联机构的运动学和奇异性
- 作者：Binbin Peng;Wenchen Zhen;Xiangqian Wang;Kaituo He;Song FU
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Parallel manipulator;
- Motion characteristics;
- Position analysis;
- Singularity;
8.Static Performance Analysis of an Exechon-like Parallel Kinematic Machine

机译：类Exechon并联运动机的静态性能分析
- 作者：Tengfei Tang;Jun Zhang;Marco Ceccarelli
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Exechon;
- Parallel kinematic machine;
- Dexterity;
- Static performance;
9.Motion Analysis of a 2-DoF Planar Mechanism

机译：2自由度平面机构的运动分析
- 作者：Ziming Chen;Xuedan Wei;Xiaomeng Liu;Dongliang Cheng;Peng Huang
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Planar mechanism;
- 2-DoF;
- Axisymmetry;
- Continuous rotation;
10.DOF and Kinematic Analysis of a Deployable Truss Antenna Assembled by Tetrahedral Elements

机译：四面体单元组装的可展开桁架天线的自由度和运动学分析
- 作者：Wenlan Liu;Yundou Xu;Yongsheng Zhao;Jiantao Yao;Bo Han;Liangliang Chen
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Deployable structure;
- Truss antenna;
- Degree of freedom;
- Kinematic analysis;
- Screw theory;
11.Displacement Analysis of a 6R Serial Robot Mechanism Using Conformal Geometric Algebra

机译：使用共形几何代数的6R串行机器人机构的位移分析
- 作者：Xiguang Huang;Dishuo Zhao
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Displacement analysis;
- 6R serial robot;
- Conformal geometric algebra;
12.The Kinematics of a 3-DOF Mechanism for Wave Energy Converter

机译：波浪能转换器的三自由度机构的运动学
- 作者：Weixing Chen;Feng Gao
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- WEC;
- Principle;
- 3-DOF mechanism;
- Kinematics;
13.Isomorphism Identification of Planar Multiple Joint Kinematic Chains by Circuit Analysis Method

机译：平面多关节运动链同构的电路分析方法
- 作者：Yanhuo Zou;Peng He;Dawei Xu;Jun Li
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
14.Automatic Synthesis of Planar Simple Joint Kinematic Chains by Single Kinematic Chain Adding Method

机译：单运动链添加法自动合成平面简单关节运动链
- 作者：Yanhuo Zou;Peng He;Dawei Xu;Jun Li
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
15.A Novel Geometric Modeling and Solution Method for Forward Displacement Analysis of 6-3 Stewart Platforms

机译：6-3 Stewart平台正向位移分析的新型几何建模和求解方法
- 作者：Ying Zhang;Qizheng Liao;Shimin Wei;Feng Wei;Duanling Li
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Forward displacement analysis;
- 6-3 Stewart platforms;
- Conformal geometric algebra;
- Sylvester resultant;
16.Structural Conditions of Two Types of 3-DOF Parallel Mechanisms with Zero-Torsion Characteristics

机译：两种具有零扭转特性的三自由度并联机构的结构条件
- 作者：Jiexin Zou;Jingjun Yu
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Parallel mechanism;
- Symmetry;
- Zero torsion;
17.Kinematics and Stiffness Characteristics of 3-PRP Planar Parallel Mechanism

机译：3-PRP平面并联机构的运动学和刚度特性
- 作者：Yuting Du;Ruiqin Li;Qianwen Dong
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- 3-PRP;
- Planar parallel mechanism;
- Kinematics;
- Stiffness;
18.Topology Optimization of 3-DOF Peristaltic Structure Based on Vector Continuous Mapping Matrix

机译：基于矢量连续映射矩阵的三自由度蠕变结构拓扑优化
- 作者：Zhu Dachang;Feng Yanping
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Peristaltic structure;
- Topology optimization;
- Vector continuous mapping matrix;
19.Vision-Aided Online Kinematic Calibration of a Planar 3RRR Manipulator

机译：平面3RRR机械手的视觉辅助在线运动学校准
- 作者：Hai Li;Xianmin Zhang;Lei Zeng;Heng Wu
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Vision-aided;
- Kinematic calibration;
- 3RRR manipulator;
- Automatic;
20.Workspace Analysis and Application of the PRRRP Decoupled Parallel Mechanism

机译：PRRRP解耦并联机构的工作区分析与应用
- 作者：Shuwei Qu;Ruiqin Li
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Decoupled parallel mechanism;
- Workspace;
- Optimization;
21.The Workspace Analysis and Simulation of a Novel Dexterous Hand FZU-Ⅰ

机译：新型灵巧手FZU-Ⅰ的工作空间分析与仿真
- 作者：Fanlei Chen;Ligang Yao;Chen Peng;Changsheng Fang;Wenjian Li
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Dexterous hand;
- MATLAB;
- Workspace;
- Simulation;
22.Real-Time Solutions to the Forward Kinematics of a 2RSS + RRR Parallel Mechanism

机译：2RSS + RRR并联机构正向运动的实时解决方案
- 作者：Hongdong Zhang;Yuru Zhang;Dangxiao Wang
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Parallel mechanism;
- Forward kinematics;
- Real-time;
- Newton-Raphson;
23.A Step Identification Method for Kinematic Calibration of a 6-DOF Serial Robot

机译：6自由度串行机器人运动学标定的步骤识别方法
- 作者：Huaiyan Tang;Zhenya He;Yexin Ma;Xianmin Zhang
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Serial robot;
- Kinematic calibration;
- Step identification method;
- Laser tracker;
24.Dynamic Characteristics of Planetary Transmission with Thin-Walled Ring Gear on Elastic Supports under Different Working Conditions

机译：不同工作条件下弹性支撑上薄壁环形齿轮行星传动的动态特性
- 作者：Jianying Li;Qingchun Hu
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Elastic supports;
- Thin-walled ring gear;
- Vibration testing;
- Working conditions;
25.Stiffness Modeling of Parallel Manipulator with Articulated Traveling Plate

机译：铰接行走板并联机器人的刚度建模
- 作者：Tao Sun;Hao Wu;Binbin Lian;Panfeng Wang;Yimin Song
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
26.The Vibration Control of Stick-Slip Actuated Precision Positioning Structure

机译：粘滑致动精密定位结构的振动控制
- 作者：Yunzhi Zhang;Xianmin Zhang;Qinghua Lu
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
27.Dynamics Analysis of a Modular Reconfigurable Parallel Robot

机译：模块化可重构并联机器人的动力学分析
- 作者：Qisheng Zhang;Ruiqin Li;Jingjing Liang
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Modular reconfigurable parallel robot;
- Modal analysis;
- Harmonic response;
28.Inversion Study of Current Parameters Based on Attitude Data of Subsurface Buoy System

机译：基于水下浮标系统姿态数据的电流参数反演研究
- 作者：Z.Y. Chang;Y.M. Fang;Z.Q. Zheng
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Subsurface buoy system;
- Attitude;
- Current profile;
- Fitting function;
- Inversion analysis;
- Polygonal approximation method;
29.Dynamic Modeling of Spherical 5R Parallel Mechanism for Spherical Plain Bearing Running-in Equipment

机译：球面滑动轴承磨合装置的球面5R并联机构动力学建模
- 作者：Yilei Zheng;Weidong Guo;Yan Xie
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Spherical plain bearing;
- Running-in;
- Spherical 5R parallel mechanism;
- Dynamics;
- Lagrange method;
30.Dynamic Modeling and Analysis of Sucker Rod Pumping System in a Directional Well

机译：定向井抽油杆抽油系统动力学建模与分析
- 作者：Dong-yu Wang;Hong-zhao Liu
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Dynamic modeling;
- Rod pumping system;
- Directional well;
- Plunger-barrel friction;
- Polished rod load;
31.Dynamics Modeling, Control System Design and Simulation of Manipulator Based on Lagrange Equation

机译：基于拉格朗日方程的机械手动力学建模，控制系统设计与仿真
- 作者：Da-quan Li;Hua-jie Hong;Xian-liang Jiang
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Manipulator;
- Lagrange equation;
- Control system;
- Simulation;
32.The Dynamic Characteristics Analysis of the Vertical Milling-Turning Machining Center

机译：立式铣车加工中心的动态特性分析
- 作者：Jialin Li;Yidu Zhang;Qiong Wu;Hanjun Gao
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Vertical milling-turning machining center;
- Dynamic characteristics analysis;
- FEM;
- Modal analysis;
33.Dynamic Modeling and Simulation of Q-Baller-A Spherical Wheeled Robot

机译：Q-Baller-A球形轮式机器人的动力学建模和仿真
- 作者：Jiamin Wang;Yuyi Lin
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Spherical wheeled robot;
- Dynamic modeling;
- Modern control;
- Real time simulation;
- Noisy simulation environment;
- Human machine interface;
34.Stiffness Analysis and Measurement Method for a 3-DOF Cable-Driven Joint Module

机译：三自由度电缆驱动接头模块的刚度分析和测量方法
- 作者：Kaisheng Yang;Guilin Yang
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
35.Elastodynamics of a Rigid-Flexible 3-(R)RR Mechanism with Joint Clearances

机译：具有关节间隙的刚性-柔性3-（R）RR机构的弹性动力学
- 作者：Xuchong Zhang;Xianmin Zhang
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Elastodynamics;
- Joint clearance;
- 3-(R)RR mechanism;
- Contact model;
36.Accuracy Analysis of a 3-DOF Mechanism with Joint Clearances Under Different Working Modes

机译：不同工作方式下带有联动间隙的三自由度机构的精度分析
- 作者：Xuchong Zhang;Xianmin Zhang
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- 3-(R)RR mechanism;
- Joint clearance;
- Accuracy analysis;
- Working modes;
37.Dynamic Response and Stability Analysis of a Parallel Mechanism with Clearance in Revolute Joint

机译：旋转关节间隙并联机构的动力响应及稳定性分析
- 作者：Yulei Hou;Guoning Jing;Yi Wang;Daxing Zeng;Xuesong Qiu
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Parallel mechanism;
- Clearance;
- Dynamics;
- Stability;
- Optimization;
38.Chaos Suppression for Joint Clearances Based on Trajectory Planning of Robotic Mechanisms

机译：基于机器人机构轨迹规划的关节间隙混沌抑制
- 作者：Wanghui Bu;Chenguang Yang;Duyu Chen;Hangyu Zhou;Jia Hu;Yinfan Hou
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Manipulator;
- Clearance;
- Chaos;
- Trajectory planning;
39.Effects of Body Flexibility on Dynamics of Mechanism with Clearance Joint

机译：身体柔韧性对间隙关节动力学的影响
- 作者：Zheng Feng Bai;Xin Shi;Ping Ping Wang
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Clearance joint;
- Flexible body;
- Mechanical system;
- Dynamics characteristics;
40.The Dynamics Modeling of Serial Robot with Joint Clearance Based on the Massless Link Method

机译：基于无质量链方法的联合间隙串行机器人动力学建模。
- 作者：Chanyuan Chen;Lixin Yang;Yanjiang Huang;Haopeng Zhou;Jinying Zhang;Xianmin Zhang
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Massless link method;
- Dynamics modeling;
- Clearance angle;
41.A Precise FE Model of a Spur Gear Set Considering Eccentric Error for Quasi-static Analysis

机译：考虑偏心误差的正齿轮组精确有限元模型的准静态分析
- 作者：Huimin Dong;Chu Zhang;Xiwei Wang;Delun Wang
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Quasi-static finite element method;
- Node-to-node model;
- Eccentric error;
42.Velocity Ratio Variation Device Without Interruption and Control System for Automatic Ratio Change

机译：无间断速度比变化装置及自动变比控制系统
- 作者：Masaharu Komori;Yukihiko Kimura
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Ratio variation;
- Transmission;
43.An Elastic Transmission Model of Spur Gears for TE Analysis

机译：用于TE分析的正齿轮弹性传动模型
- 作者：Huimin Dong;Zhipeng Li;Delun Wang
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Transmission error;
- Conjugate contact;
- Errors and elasticity;
44.Configuration Synthesis of Compound Gear Trains Based on State-Space Approach

机译：基于状态空间方法的复合齿轮系构型综合
- 作者：Jun Qiu;Huimin Dong;Yali Ma;Shangkun Xu;Delun Wang
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Compound gear trains;
- Configuration synthesis;
- Conceptual design;
- State-space;
45.Identification and Modification of Closed Defect of the Location Function for N-Lobed Noncircular Gears

机译：N瓣非圆齿轮定位函数闭合缺陷的识别与修正
- 作者：Xin Zhang;Shouwen Fan
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Location function;
- Closed defect;
- Pitch curve interference;
- Noncircular gear;
- Identification;
- Modification;
46.Design of a Maximally Regular Acceleration Sensor Based on Generalized Gough-Stewart Platforms

机译：基于广义Gough-Stewart平台的最大规则加速度传感器设计
- 作者：Zhizhong Tong;Hongzhou Jiang;Hui Zhang;Jingfeng He
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Acceleration sensor;
- Gough-Stewart platform;
- Isotropy;
- Circular hyperboloids;
- Coupling analysis;
47.A Multi-objective Design Optimization of a Centrifugal Cooling Fan on a TEFC Motor

机译：TEFC电动机离心冷却风扇的多目标设计优化
- 作者：Qi Lu;Fei Zhen;Martin Kefer;Maria Nylander
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Design optimization;
- Centrifugal cooling fan design;
- Fan noise;
48.Research on Slope Climbing Capacity of a Close Chain Five-Bow-Shaped-Bar Linkage

机译：闭链五弓杆连杆机构的爬坡能力研究
- 作者：Lian-qing Yu;Yuan-yuan Mei;Yu-jin Wang;Chang-lin Wu
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- A close chain five-bow-shaped-bar linkage;
- Constant CG offset;
- Slope climbing;
- Joint trajectory;
49.Multi-objective Optimization Design of Automated Side Loader of Arm Actuator

机译：手臂执行器自动侧装载器的多目标优化设计
- 作者：Binlin Yi;Jiangnan Liu
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Automated side arm;
- Trajectory of key point;
- Motion smoothness;
- Multi-objective optimization;
50.Optimal Design of Parallel Mechanism for Automobile Electro-Coating Conveyor

机译：汽车电镀输送机并联机构的优化设计
- 作者：Suhua Yao;Guoqin Gao;Zhiming Fang
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Parallel mechanism;
- Global stiffness index;
- Optimal design;
- Work space;
51.Design and Simulation of a Dual-Piezo-Driven Actuator Utilizing the Bridge-Type Mechanism

机译：利用桥式机构的双压电致动器的设计与仿真
- 作者：Junyang Wei;Xianmin Zhang;Sergej Fatikow
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Actuator;
- Friction drive;
- Compliant mechanism;
- Dual piezo;
52.A Novel Method of Fault-Location in Long Power Cable

机译：长电缆故障定位的新方法
- 作者：Jianwei Mi;Ximing Men;Xiaoli Fang;Libin Fan
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Successive high-frequency pulse signal;
- Pulse accumulation;
- Fault location;
- Long power cable;
53.The Study Status of the Key Techniques About the Toroidal Drive

机译：环形驱动关键技术的研究现状
- 作者：Yanhua Zhang;Jujiang Cao;Beibei Liu
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Toroidal drive;
- Study status;
- Future research direction;
54.Motion Control of Pneumatic Muscle Actuator Using Fast Switching Valve

机译：快速切换阀控制气动肌肉执行器
- 作者：Shenglong Xie;Jiangping Mei;Haitao Liu;Panfeng Wang
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Fast switching valve;
- Pneumatic muscle actuator;
- Hysteresis identification;
- Tracking control;
55.Research on SEM's Astigmatism Detection Based on Image Processing

机译：基于图像处理的SEM像散检测研究
- 作者：Yihua Lu;Xianmin Zhang;Zhenya He
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Image processing;
- Astigmatism;
- SEM system;
- Definition evaluation;
56.A New Position and Attitude Measurement Method for Planar Parallel Mechanism

机译：平面并联机构的位置姿态测量新方法
- 作者：Zhicong Jian;Xianmin Zhang;Zhenya He
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Vision measurement;
- Image processing;
- Pattern for identification;
- Planar parallel mechanism;
57.Research on Robot Calibration Based on Laser Tracker

机译：基于激光跟踪仪的机器人标定研究
- 作者：Yabo HuangFu;Lubin Hang;Wushan Cheng;Liang Yu;Chengwei Shen;Jun Wang;Wei Qin;Yan Wang
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Serial robot;
- Laser tracker;
- Robot calibration;
- LM algorithm;
58.Calculation and Analysis on Crest Thickness of Edge Tooth of Height-Modified TA Worm

机译：加高TA蜗杆棱齿齿顶厚度的计算与分析。
- 作者：Chongfei Huai;Yaping Zhao;Yimin Zhang
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Hourglass worm drives;
- Crest thickness of edge tooth;
- TA worm;
- Height-modified;
59.Architecture of a Hydraulic Hybrid Vehicle with Pressure Cross-Feedback Control

机译：具有压力交叉反馈控制的液压混合动力汽车的架构
- 作者：Zhuoqun Chen;Chaoyu Yu;Wei Wu;Chongbo Jing;Shihua Yuan;Chongfeng Di
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
60.The Vibration Modal Analysis of the Ball Screw About Precision Machine Tools

机译：精密机床滚珠丝杠的振动模态分析
- 作者：Nian- Cong Liu;Jin Xie;Hao- Ran Zeng
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Ball screw;
- Modal analysis;
- Natural frequency;
61.The Kinematic Invariants in Testing Error Motion of Machine Tool Linear Axes

机译：测试机床线性轴误差运动的运动学不变量
- 作者：Yu Wu;Delun Wang;Zhi Wang;Huimin Dong;Shudong Yu
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Discrete kinematic geometry;
- Invariant;
- Spherical image curve;
- Directrix;
- Error evaluation;
62.Research on the Principle of Six Degree-of-Freedom Laser Tracker Metrology

机译：六自由度激光跟踪仪计量原理研究
- 作者：Liang Yu;Lubin Hang;Wushan Cheng;Yabo Huangfu;Wentao Li;Guobin Yang
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Laser measurement;
- Monocular vision;
- Dual frequency modulation;
- Phase difference interferometry;
63.Kinematic Synthesis of Planar Cam Mechanism with Translating Roller Follower by Kinematic Analysis of Binary Link Chain

机译：二元链链运动学分析平滚子从动件平面凸轮机构的运动学综合。
- 作者：W.W. Zhu;Z.H. Lan
- 会议名称：《IFTOMM Asian conference on mechanism and machine science》 | 2017年
- Planar cam mechanism;
- Translating roller follower;
- Kinematic synthesis;
- Kinematic analysis;
- Binary link chain;