首页>外文会议>其他>International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing

International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Towards Effective Management of Cold Chain: A DEMATEL Approach

机译：朝着冷链有效管理：Dematel方法
- 作者：Mr. Shahbaz Khan;Mr Mohd Imran Khan;Dr Abid Haleem
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- Cold Chain;
- Cold Chain Management;
- Barriers;
- Temperature Controlled Logistics;
- Perishable Products;
2.Indian based fly ash international based fly ash: A review paper

机译：印度粉煤灰和国际粉煤灰：审查纸
- 作者：A Fuzail Hashmi;Moin ul Haq
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
3.Russian industrial sector in the conditions of the Fourth Industrial Revolution

机译：俄罗斯工业部门在第四个工业革命的条件下
- 作者：E Balashova;E Gromova
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
4.Thermal Characterization of inorganic salts as phase change materials for thermal energy storage systems

机译：无机盐的热表征作为热能储存系统的相变材料
- 作者：Dibakar Rakshit;Ashutosh Pratap Singh
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- Phase change materials(PCMs);
- thermophysical properties;
- NaN03;
- KN03;
5.Thermal buckling analysis of laminated hybrid beam with variable piezoelectric layer thicknesses

机译：具有可变压电层厚度的层压混合梁热屈曲分析
- 作者：N Rahman;M N Alam
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
6.Study of Natural Fibre Reinforced Composites

机译：天然纤维增强复合材料的研究
- 作者：Mohammad Affan Usniani;Mohd. Anas
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
7.An Overview on Recent progresses and future perspective of biomaterials

机译：概述最近进展和生物材料的未来视角
- 作者：Sukriti Yadav;Swati Gangwar
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- Biomaterials;
- Biocompatibility;
- Metals/Ceramics;
- Polymers;
- Composites etc.;
8.Buckling Analysis of FGM Plates by thin plate spline RBF based Meshfree Approach

机译：基于薄板的FGM板屈曲分析基于Meshfree方法
- 作者：Amit Kumar;Rahul Kumar;Jay Damania
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- Meshfree;
- Buckling;
- RBF;
- FGM Plate;
9.Detection of propanol gas using titanium dioxide based thick film

机译：基于二氧化钛的厚膜检测丙醇气
- 作者：Ankit Kumar Vishwakarma;Lallan Yadav
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- TiO2;
- propanol;
- sensitivity and Thick film;
10.Temperature and thermal stress distribution in underwater friction stir welding of aluminium plates

机译：铝板水下摩擦搅拌焊接温度和热应力分布
- 作者：Anil Kumar Maharia;Sonika Sahu;Mohd. Zahid Ansari
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
11.Improvement of Inter-face Layer Coating by Plasma Treatment of Carbon Fiber for Carbon Fiber Reinforced Silicon Carbide Composite Applications

机译：碳纤维碳纤维碳纤维碳纤维碳纤维间涂层间层涂层的改进
- 作者：Sonam H. Suthar;N. Chandwani;C. Jariwala
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
12.Prioritising Barriers towards Adoption of Sustainable Consumption and Production Practices using TOPSIS

机译：优先考虑采用可持续消费和生产实践的障碍使用TOPSIS
- 作者：Mr Mohd Imran Khan;Mr Shahbaz Khan;Dr Abid Haleem
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- Sustainable Consumption and Production (SCP);
- Sustainable Development;
- TOPSIS;
- Natural Resources;
13.Advanced Technology in Desiccant Wheel Air Conditioning System: A Review

机译：高级技术在干燥裤式空调系统中：综述
- 作者：Amarjeet Kumar Prasad;Laxmikant Yadav
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
14.Role of Renewable Energy in Indian Economy

机译：可再生能源在印度经济中的作用
- 作者：Aaditya Ranjan Srivastava;Manawar Khan;Faraz Yusuf Khan
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- renewable energy;
- fossil fuels;
- Indian economy;
- Government effort.;
15.Improving Vibration analysis of laminated composite plate by using WU-C2 RBP based Meshfree Method

机译：采用Wu-C2 RBP基于网状紫外法改善层压复合板的振动分析
- 作者：Peeyush Chandra Vishwakarma;Jay Damania;Jeeoot Singh
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- Meshfree;
- RBF;
- laminated composite;
- vibration;
16.Selection of Traceable Technology in Food Supply Chain

机译：可追踪技术在食品供应链中的选择
- 作者：Mr Shahbaz Khan;Mr Mohd Imran Khan;Dr Abid Haleem
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- Analytic Hierarchy Process (AHP);
- Factors;
- Food supply chain (FSC);
- Traceability;
- Traceable technology;
17.Analytical Modelling and FEM Simulation of Capacitive Pressure Sensor for Intraocular Pressure Sensing

机译：用于眼压传感的电容式压力传感器的分析模拟和有限元模拟
- 作者：Rishabh Bhooshan Mishra;S Santosh Kumar;Ravindra Mukhiya
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
18.FaciMtating Fair Trade Practices as a Development Strategy

机译：将公平贸易实践作为发展战略
- 作者：Mr Mohd Imran Khan;Mr Shahbaz Khan;Dr Abid Haleem
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- Fair Trade;
- Globalisation;
- Poor;
- Consumer Awareness;
- Capitalist Economy;
- DEMATEL.;
19.Analyzing optimum thickness for combination of two thermal insulation materials for building walls

机译：分析用于建筑墙壁的两个绝热材料的组合的最佳厚度
- 作者：Syed Ali Husain Jafri;Prem Kumar Bharti
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- Combination of two insulation materials;
- Fraction;
- Optimum thickness;
20.Processing and Evaluation of Microstructure Physical Properties of A17075 Reinforced with Cermets by Stir Casting Route

机译：用搅拌速度用CERMET加固A17075的微观结构和物理性质的加工和评估
- 作者：Gopal Krishna U B;Ajay Kumar N L;Vishal V.K
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- Cermet;
- composite;
- ceramics;
- ball milling;
21.Study of mixing in circular unbalanced split recombine micromixer

机译：循环不平衡分裂和重组微混合混合的研究
- 作者：J Husain;M A Ansari
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
22.Effect of sustainability-related activity on behaviour: consumer vs. designer

机译：可持续性相关活动对行为的影响：消费者与设计师
- 作者：Bijendra Kumar;Prabir Sarkar
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- Sustainable Product;
- Minerals;
- Consumer;
- Designer;
- Perception;
- Sustainable Behaviour;
23.Microstructure evolution of Friction Stir Welded Dissimilar Aerospace Aluminium Alloys

机译：摩擦搅拌焊接不同航空航天铝合金的微观结构演变
- 作者：Noor Zaman Khan;Arshad Noor Siddiquee;Zahid A. Khan
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
24.Rolling Barriers: Emerging Concept to Reduce Road Accidents: An Indian Perspective

机译：滚动障碍：新兴概念减少道路事故：印度观点
- 作者：Muhammad Farhan;Mohd. Anas;Mohammad Azeem
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- Accidents;
- Urethane;
- Rolling Barriers;
- Stiffness;
- Resilience;
- Crash cushioning.;
25.Grey Based Taguchi Method for Optimization of TIG Process Parameter in Improving Tensile Strength of S3 0430 Stainless Steel

机译：基于灰色的TAGUCHI方法，用于改善S3 0430不锈钢拉伸强度的TIG工艺参数
- 作者：Asif Ahmad;S.Alam
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- TIG welding;
- Grey relation analysis (GRA);
- Taguchi methodology;
- Signal to Noise ratio;
- Minitabl 8.;
26.Controlling localised properties in fused deposition modelling parts: A feasibility study

机译：控制融合沉积建模部件中的局部特性：可行性研究
- 作者：Abhishek Kumar Srivastava;Prashant K. Jain
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
27.Parameter study and optimization of WEDM process: A Review

机译：WEDM过程的参数研究与优化：综述
- 作者：Md Ehsan Asgar;Ajay Kumar Singh Singholi
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
28.Sustainability Accounting and Reporting for Supply Chains in India-State-of-the-Art and Research Challenges

机译：印度供应链的可持续性会计和报告 - 最先进的和研究挑战
- 作者：Kamlesh Tiwari;Dr. Mohd. Shadab Khan;Dr. P K Bharti
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- Sustainability;
- Accounting;
- Reporting;
- Standards;
- Disclosures;
- Global Reporting Initiative;
- Supply Chain Management;
29.Assessing Barriers to Adopting and Implementing Halal Practices in Logistics Operations

机译：评估采用和实施物流业务中的清真实践的障碍
- 作者：Dr Abid Haleem;Mr Mohd Imran Khan;Mr Shahbaz Khan
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
30.Fuzzy logic optimization of process parameters affecting surface temperature in MAF

机译：影响MAF表面温度的过程参数的模糊逻辑优化
- 作者：Rajneesh Kumar Singh;D.K. Singh;Swati Gangwar
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- Magnetic Abrasive Finishing;
- Surface Temperature;
- L9 orthogonal array;
- Fuzzy logic.;
31.Static Response of Functionally Graded Plates using Higher Order Theories

机译：使用更高阶理论的功能梯度板的静态响应
- 作者：Mayank Jain;M.Y. Yasin
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- FGM plates;
- Higher order theory;
- Rule of Mixture (ROM);
- Mori-Tanaka Method (MTM);
- Analytical Fourier series solution;
32.Correlation between pulse 300 series SS wire parameters

机译：脉冲300系列SS线参数之间的相关性
- 作者：R Saluja;K M Moeed
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- Droplet;
- filler-wire;
- metal transfer;
- pulse gas metal arc welding;
- wire feed rate;
33.A Novel Design for Highway Windmill through Re-engineering

机译：通过重新设计的高速公路风车新颖设计
- 作者：Faraz Yusuf Khan;Sushant Khare;Aaditya Ranjan Srivastava
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- Wind Power;
- Re-engineering;
- Highway;
- Windmill Component.;
34.Development, Characterization and Application Potential of Bio-composites: A Review

机译：生物复合材料的开发，特征和应用潜力：综述
- 作者：Mohammad Zahid Rayaz Khan;S K Srivastava
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
35.Control of semi-active suspension system using PID controller

机译：使用PID控制器控制半主动悬架系统
- 作者：Mohammad Saad;Shagil Akhtar;A.K. Rathorea
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
36.Water heating system using concrete slab solar collector with phase change material:- a review

机译：采用混凝土板太阳能收集器的水加热系统具有相变材料： - 评论
- 作者：Vikas Yadav;Prashant Saini
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- concrete slab solar collector;
- PCM;
- latent heat and glazing.;
37.Natural fiber based adhesive butt joints as a replacement to gas welded butt joints for thin tubes: An experimental study

机译：基于天然纤维的粘合剂接头作为薄管的气体焊接接头的替代品：实验研究
- 作者：Anubhav Mishra;Suruchi Singh;Rajeev Kumar
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- Woven jute fiber;
- similar and dissimilar materials;
- epoxy resin;
- butt joints;
- adhesive joint.;
38.Analysis of Laminated and FGM Beams using Various Theories

机译：使用各种理论的层压和FGM光束分析
- 作者：Mirza Shariq Beg;M. Yaqoob Yasin;Hasan M. Khalid
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- Functionally Graded Beams;
- Higher Order Theories;
- Voigt's ROM;
- Analytical Solution.;
39.An Analytical and Simulation Approach for Modeling Flexible Manufacturing System

机译：柔性制造系统建模分析与仿真方法
- 作者：Anupma Yadav;S. C. Jayswal
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- Flexible manufacturing system;
- modeling;
- process simulator;
- mathematical technique;
- performance parameter.;
40.Modeling of hot deformation behavior of high phosphorus steel using Johnson-Cook model

机译：高磷钢热变形行为建模使用江森厨师模型
- 作者：Vartika Gupta;S K Rajput;Yashwant Mehta
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- Hot deformation behavior;
- Johnson-Cook Model;
- Flow stress;
41.Development of mathematical model for material removal and surface roughness in electrolytic magnetic abrasive finishing process

机译：电解磁磨料精加工过程中材料去除和表面粗糙度数学模型的研制
- 作者：Nitesh Pandey;Rajnish Singh;Piyush Pant
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
42.Mathematical modelling to predict mechanical properties of Copper (C101) feedstock in continuous extrusion

机译：数学建模以预测连续挤出中铜（C101）原料的力学性能
- 作者：Devendra Kumar Sinha;Santosh Kumar;Anil Kumar
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
43.Energy absorption, deformation and crushing behavior of bimetallic tubes with different cross-sectional shapes under axial loading

机译：轴向载荷下不同横截面形状对双金属管的能量吸收，变形和破碎行为
- 作者：Afaque Umer;Bakhtawar Hasan Khan;Salman Khan
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- Bi-metallic tubes;
- crashworthiness;
- cross-section;
- energy absorption;
44.Analysis of Abrasive Wear Characteristics of Brass 60/40 Using MATLAB

机译：用MATLAB分析黄铜60/40的磨料磨损特性
- 作者：M S Khan;P Maurya;K Moeed
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
45.Mathematical modelling and performance analysis of single pass flat plate solar collector

机译：单通平板太阳能收集器的数学建模与性能分析
- 作者：Mohd Irshad;Anshul Yadav;Rajnish Singh
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
46.Multi attribute outranking approach for supplier selection

机译：供应商选择的多属性远离方法
- 作者：Nitesh Kumar;Tarun Soota;Neetesh Gupta
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
47.Material Science Metallurgical Engineering Education in India-Past, Present Future

机译：印度的材料科学与冶金工程教育 - 过去，现在和未来
- 作者：Aaditya Ranjan Srivastava;Shrish Bajpai;Sushant Khare
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- Material Science;
- Metallurgical Engineering;
- Technical Education;
- India.;
48.Optimization of Multi-Gate Systems in Casting Process: Experimental and Simulation Studies

机译：铸造过程中多栅系统的优化：实验和仿真研究
- 作者：Mohd. Bilal Nairn Shaikh;Shazeb Ahmad;Arfeen Khan
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- Casting;
- runner;
- gates;
- flow velocity;
- flow rate.;
49.Interaction of water soluble polyacrylic acid with mild steel / hydrochloric acid interface

机译：水溶性聚丙烯酸与温和钢/盐酸界面的相互作用
- 作者：Abhishek Dwivedi;P.K. Bharti;Sudhish Kumar Shukla
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- Polymer;
- Weight loss;
- Electrochemical calculation;
- Inhibition;
50.Performance prediction of solid desiccant rotary system using artificial neural network

机译：人工神经网络实心干燥剂旋转系统的性能预测
- 作者：V K Mishra;R P Singh;R K Das
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
51.Response study of concrete gravity dam against aircraft crash

机译：混凝土重力坝对飞机崩溃的响应研究
- 作者：M. R. Sadique;M. I. Ansari;M.F. Athar
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- Dam;
- Aircraft crash;
- Safety;
- Finite element;
52.Desiccant materials for air conditioning applications - A revie

机译：用于空调应用的干燥材料 - 审查
- 作者：R P Singh;V K Mishra;R K Das
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- solid desiccant;
- liquid desiccant;
- regeneration;
- dehumidification;
- air-conditioning;
53.A Comparative Study of Practices for Integration of Sustainability With Innovation for Micro, Small Medium Scale Manufacturing Enterprises (Msmes) in India and in England

机译：在印度和英格兰在印度和英国微，中小型制造企业（MSMES）创新融合措施的比较研究
- 作者：S Khurana;B Mannan;A Haleem
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
54.Improving Vibration analysis of laminated composite plate by using WU-C2 RBP based Meshfree Method

机译：基于Wu-C2 RBP的网状纤维法改善层压复合板的振动分析
- 作者：Peeyush Chandra Vishwakarma;Jay Damania;Jeeoot Singh
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- Meshfree;
- RBF;
- laminated composite;
- vibration;
55.Detection of propanol gas using titanium dioxide based thick film

机译：基于二氧化钛的厚膜检测丙醇气
- 作者：Ankit Kumar Vishwakarma;Lallan Yadav
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- TiO2;
- propanol;
- sensitivity and Thick film;
56.Towards Effective Management of Cold Chain: A DEMATEL Approach

机译：朝着冷链有效管理：Dematel方法
- 作者：Mr. Shahbaz Khan;Mr Mohd Imran Khan;Dr Abid Haleem
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- Cold Chain;
- Cold Chain Management;
- Barriers;
- Temperature Controlled Logistics;
- Perishable Products;
57.Selection of Traceable Technology in Food Supply Chain

机译：食品供应链可追踪技术的选择
- 作者：Mr Shahbaz Khan;Mr Mohd Imran Khan;Dr Abid Haleem
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- Analytic Hierarchy Process (AHP);
- Factors;
- Food supply chain (FSC);
- Traceability;
- Traceable technology;
58.Prioritising Barriers towards Adoption of Sustainable Consumption and Production Practices using TOPSIS

机译：优先考虑采用可持续消费和生产实践的障碍使用TOPSIS
- 作者：Mr Mohd Imran Khan;Mr Shahbaz Khan;Dr Abid Haleem
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- Sustainable Consumption and Production (SCP);
- Sustainable Development;
- TOPSIS;
- Natural Resources;
59.Buckling Analysis of FGM Plates by thin plate spline RBF based Meshfree Approach

机译：基于薄板的FGM板屈曲分析尺寸基于网射线的网
- 作者：Amit Kumar;Rahul Kumar;Jay Damania
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- Meshfree;
- Buckling;
- RBF;
- FGM Plate;
60.Advanced Technology in Desiccant Wheel Air Conditioning System: A Review

机译：干燥裤轮空调系统的先进技术：综述
- 作者：Amarjeet Kumar Prasad;Laxmikant Yadav
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
61.Temperature and thermal stress distribution in underwater friction stir welding of aluminium plates

机译：铝板水下摩擦搅拌焊接温度和热应力分布
- 作者：Anil Kumar Maharia;Sonika Sahu;Mohd. Zahid Ansari
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
62.Role of Renewable Energy in Indian Economy

机译：可再生能源在印度经济中的作用
- 作者：Aaditya Ranjan Srivastava;Manawar Khan;Faraz Yusuf Khan
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- renewable energy;
- fossil fuels;
- Indian economy;
- Government effort.;
63.Grey Based Taguchi Method for Optimization of TIG Process Parameter in Improving Tensile Strength of S3 0430 Stainless Steel

机译：基于灰色的TAGUCHI方法，用于改善S3 0430不锈钢拉伸强度的TIG工艺参数
- 作者：Asif Ahmad;S.Alam
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- TIG welding;
- Grey relation analysis (GRA);
- Taguchi methodology;
- Signal to Noise ratio;
- Minitabl 8.;
64.Analyzing optimum thickness for combination of two thermal insulation materials for building walls

机译：分析用于建筑墙壁两种隔热材料的组合的最佳厚度
- 作者：Syed Ali Husain Jafri;Prem Kumar Bharti
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- Combination of two insulation materials;
- Fraction;
- Optimum thickness;
65.Controlling localised properties in fused deposition modelling parts: A feasibility study

机译：控制融合沉积建模部件中的局部特性：可行性研究
- 作者：Abhishek Kumar Srivastava;Prashant K. Jain
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
66.Development, Characterization and Application Potential of Bio-composites: A Review

机译：生物复合材料的开发，表征和应用潜力：综述
- 作者：Mohammad Zahid Rayaz Khan;S K Srivastava
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
67.A Novel Design for Highway Windmill through Re-engineering

机译：通过重新工程的公路风车新颖设计
- 作者：Faraz Yusuf Khan;Sushant Khare;Aaditya Ranjan Srivastava
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- Wind Power;
- Re-engineering;
- Highway;
- Windmill Component.;
68.Analysis of Laminated and FGM Beams using Various Theories

机译：使用各种理论分析层压和FGM光束
- 作者：Mirza Shariq Beg;M. Yaqoob Yasin;Hasan M. Khalid
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- Functionally Graded Beams;
- Higher Order Theories;
- Voigt's ROM;
- Analytical Solution.;
69.Mathematical modelling and performance analysis of single pass flat plate solar collector

机译：单通平板太阳能收集器的数学建模与性能分析
- 作者：Mohd Irshad;Anshul Yadav;Rajnish Singh
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
70.Analysis of Abrasive Wear Characteristics of Brass 60/40 Using MATLAB

机译：使用MATLAB分析黄铜60/40的磨料磨损特性
- 作者：M S Khan;P Maurya;K Moeed
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
71.Material Science Metallurgical Engineering Education in India-Past, Present Future

机译：印度的材料科学与冶金工程教育 - 过去，现在和未来
- 作者：Aaditya Ranjan Srivastava;Shrish Bajpai;Sushant Khare
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- Material Science;
- Metallurgical Engineering;
- Technical Education;
- India.;
72.Energy absorption, deformation and crushing behavior of bimetallic tubes with different cross-sectional shapes under axial loading

机译：轴向载荷下不同横截面形状的双金属管的能量吸收，变形和破碎行为
- 作者：Afaque Umer;Bakhtawar Hasan Khan;Salman Khan
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- Bi-metallic tubes;
- crashworthiness;
- cross-section;
- energy absorption;
73.Response study of concrete gravity dam against aircraft crash

机译：对飞机崩溃混凝土重力坝的响应研究
- 作者：M. R. Sadique;M. I. Ansari;M.F. Athar
- 会议名称：《International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing》 | 2018年
- Dam;
- Aircraft crash;
- Safety;
- Finite element;