首页>外文会议>其他>International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering

International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Experimental Analysis of Implementing Roughness on NACA 0018 Airfoil

机译：NaCA 0018翼型中粗糙度实施粗糙度的实验分析
- 作者：E. Livya;R. Sai Anirudh;V. Vignesh;B. Prasannavenkatesh;S. Nadaraja Pillai
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
2.Numerical Investigation of Single Ramp Scramjet Inlet Characteristics at Mach Number 5.96 Due to Shock Wave-Boundary Layer Interaction

机译：由于冲击波边界层相互作用，马赫编号5.96的单斜坡跳闸入口特性的数值研究
- 作者：K. Raja Sekar;S. Jegadheeswaran;R. Kannan;P. Vadivelu;G. Prasad
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
3.Numerical Simulation of Viscous Flow Past Elliptic Cylinder

机译：粘液流过去椭圆筒的数值模拟
- 作者：Ranjith Maniyeri
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
4.Pedagogical Evaluation of Mechanical Engineering Education Using Additive Manufacturing

机译：使用添加剂制造的机械工程教育教学评价
- 作者：Saurabh Srivastava;Sarang Pande
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
5.Optimization of a Dual-Stepped Cone Inlet for Scramjet Applications

机译：SCRAMBET应用程序的双阶梯式锥体入口的优化
- 作者：Subramanian Suryanarayanan;Nivetha Shyam;G. Devi;Giri Revanth Ravish
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
6.Thrust Prediction Model for Varying Chamber Pressure for a Hypergolic Bipropellant Liquid Rocket Engine

机译：用于高胆玻璃液体火箭发动机的不同室压力的推力预测模型
- 作者：P. Arun Kumar;C. Rajeev Senan;B. Ajith;Aishwarya Shankhdhar
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
7.Development of Simulation Model for Effective Testing and Verification of Servo Vacuum Booster

机译：伺服真空助推器有效测试仿真模型的研制
- 作者：A. Selwin Mich Priyadharson;S. Vinson Joshua;B. Senthil Kumaran
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
8.Experimental Investigation of Wear and Hardness Test Over AA2219 with Reinforcement of Tungsten Carbide

机译：碳化钨加固磨损硬度试验试验研究
- 作者：R. Rohith Renish;M. Arun Pranesh;K. Karthik;Vasavi Vanarasi
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
9.Computational Simulation of Wind Flow Behavior Around a Building Structure

机译：建筑结构周围风流行为的计算模拟
- 作者：K. B. Rajasekarababu;G. Vinayagamurthy
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
10.Development of Inhibition System for SIS Process

机译：SIS过程抑制系统的发展
- 作者：G. Bhuvaneshwaran;Mesfin Sisay;R. Manivannan;P. Arunkumar;M. Silambarasan
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
11.Hot Forging Characteristics of Powder Metallurgy Duplex Stainless Steels Developed from 304L and 430L Pre-alloyed Powders

机译：从304L和430L预合金粉末开发的粉末冶金双相不锈钢的热锻特性
- 作者：C. Rajkumar;R. Mariappan;S. Jayavelu;M. Arun Prasad;Ankam Vinod Kumar
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
12.Numerical Analysis of Discrete Element Camber Morphing Airfoil in the Reynolds Number of Conventional Flyers

机译：传统传单中雷诺数的离散元件变形翼型的数值分析
- 作者：T. Rajesh Senthil Kumar;Nikitha Narayanaprasad;Yashmitha Kumaran;V. Sivakumar;Balajee Ramakrishnananda
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
13.Finite Element Analysis of Lifting Lugs Under Actual Factory Conditions

机译：实际工厂条件下提升凸耳有限元分析
- 作者：Aamir Abbas
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
14.Experimental Investigations for Improving the Strength of Parts Manufactured Using FDM Process

机译：用于改善使用FDM工艺制造的部件强度的实验研究
- 作者：N. V. S. S. Sagar;K. S. Vepa
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
15.Processing and Evaluation of Mechanical Properties of Sisal and Bamboo Chemically Treated Hybrid Composite

机译：Sisal和竹子化学处理杂交复合材料机械性能的加工与评价
- 作者：R. Siva;T. N. Valarmathi;B. Siddardha;Kallat Sanjana;Bhasker Dakshin
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
16.Investigation of Relation Between Ignition Timing and Advance Angle to Improve Engine Performance

机译：点火正时与推进角度的关系调查，提高发动机性能
- 作者：Aditya Balkrishna Kale;Jyoti Madhav Phate;Prashant Sarjerao Munfan;Yogesh Suresh Chavan
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
17.Experimental Studies on Surface Roughness of H12 Tool Steel in EDM Using Different Tool Materials

机译：采用不同工具材料对EDM中H12工具钢表面粗糙度的实验研究
- 作者：T. N. Valarmathi;S. Sekar;G. Anthony;R. Suresh;K. N. Balan
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
18.On the Surface Finish Improvement in Hybrid Additive Subtractive Manufacturing Process

机译：关于混合添加剂减法制造工艺的表面光洁度改进
- 作者：Mayur Vispute;Narendra Kumar;Prashant K. Jain;Puneet Tandon;Pulak M. Pandey
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
19.Optimization of Clutch Cover Mounting Base Plate Through Twin Threaded Grub Screw

机译：通过双螺纹粗螺钉优化离合器盖安装底板
- 作者：T. V. B. Babu;R. Anbazhagan;V. Sathiyamoorthy;K. Arumugam;R. Suresh
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
20.Active Vortex Shedding Control for Flow Over a Circular Cylinder Using Rearward Jet Injection at Low Reynolds Number

机译：在低雷诺数的后喷射注射时，主动涡旋脱落控制在圆筒上流过圆柱体
- 作者：S. Karthikeyan;B. T. Kannan;S. Senthilkumar
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
21.Development of 12 Channel Temperature Acquisition System for Heat Exchanger Using MAX6675 and Arduino Interface

机译：MAX6675和Arduino界面开发热交换器12频道温度采集系统
- 作者：Sandeep P. Nalavade;Abhishek D. Patange;Chandrakant L. Prabhune;Sharad S. Mulik;Mahesh S. Shewale
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
22.Incremental Sheet Forming: An Experimental Study on the Geometric Accuracy of Formed Parts

机译：增量板形成：形成零件几何精度的实验研究
- 作者：Rahul Jagtap;Shailendra Kumar
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
23.An Improved Unsteady CFD Analysis of Pitching Airfoil Using OpenFOAM

机译：使用OpenFoam改进了俯仰翼型的不稳定CFD分析
- 作者：P. Srinivasa Murthy
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
24.Numerical Investigation of Cu-H_2O Nanofluid in a Differentially Heated Square Cavity with Conducting Square Cylinder Placed at Arbitrary Locations

机译：在逐方位置的差动方腔中Cu-H_2O纳米流体的数值研究
- 作者：Basant Kumar;Bishwajit Sharma;Rabindra Nath Barman
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
25.Inflight Parameter Estimation Framework for Fixed-Wing UAV

机译：固定翼UAV的机芯参数估计框架
- 作者：R. Jaganraj;R. Velu;P. Gokul Raj
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
26.Generalized Design of Experiments for Structural Optimization

机译：结构优化实验的广义设计
- 作者：A. V. Pavan Kumar;Karandas Kornaya;Srihari Bharadwaj;S. Sanjeev
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
27.Effects of Nano- and Micro-Filler on Water Diffusion and Leakage Current of GRP Composites

机译：纳米和微填料对GRP复合材料水扩散和漏电流的影响
- 作者：Santhy P. Kuruvilla;N. M. Renukappa
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
28.Effect of Interleaving and Low Velocity Impact on the Dielectric Properties of Composite Laminates

机译：交织与低速影响对复合层压板电介质性能的影响
- 作者：M. Umashankar;N. M. Renukappa;M. S. Lavanya;Kunigal Shivakumar
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
29.Design, Analyze, and Develop a Hybrid Silencer for 250 kVA DG Set

机译：设计，分析和开发混合扩展器，用于250 kVA DG集
- 作者：Saurabh Palnitkar;Loash Suri;Chandrabhushan Sugandhi;Prashant Anerao
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
30.Numerical Analysis of Two-Phase Blood Flow in Idealized Artery with Blockage

机译：堵塞理想动脉两相血流量的数值分析
- 作者：Krunal Joisar;Ramesh Bhoraniya;Atal Harichandan
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
31.Numerical Study of Flow Field Investigation of Air Jet Impingement on Different Solid Block Size

机译：不同固体块大小的空气喷射冲击流场研究的数值研究
- 作者：M. Muthukannan;P. Rajesh Kanna;P. Ganesan;V. Ganesh Moorthy;V. Dineshkumar
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
32.Study on Temperature Indicating Paint for Surface Temperature Measurement - A Review

机译：表面温度测量涂料温度研究 - 评论
- 作者：P. L. Rupesh;M. Arul Prakasajothi;U. Chandrasekhar;Rajendra Mycherla;M. Bhanu Teja
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
33.Effect of Equivalence Ratio on Parameters of Coal-Fired Updraft Gasifier

机译：燃煤上升气化器参数对等效率的影响
- 作者：Bhargav Manek;Hardik Ramani
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
34.Adaptive Fault Tolerance Flight Controller for Aircraft Actuator Failure

机译：用于飞机执行器故障的自适应容错飞行控制器
- 作者：M. Silambarasan;E. Balasubramanian;G. Surendar
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
35.Numerical Analysis of Bubble Hydrodynamics in a Steam Reactor Chemical Looping Reforming System

机译：蒸汽反应器化学环状重整系统中泡沫流体动力学的数值分析
- 作者：Akash Chavda;Atal Harichandan
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
36.Study on Wear Behavior of Al-Based Hybrid Metal Matrix Composites Reinforced with Al_2O_3/SiC Particles

机译：用Al_2O_3 / SiC颗粒加固的基于Al基混合金属基质复合材料的磨损行为研究
- 作者：H. P. Raturi;Lalta Prasad;M. Pokhriyal;A. Kumar
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
37.Effects of Wall Thinning Behaviour During Pipe Bending Process - An Experimental Study

机译：钢管弯曲过程中壁稀释行为的影响 - 实验研究
- 作者：M. Karthikeyan;M. P. Jenarthanan;R. Giridharan;S. J. Anirudh
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
38.Machinability Studies of TiAlN-/AlCrN-Coated and Uncoated Tungsten Carbide Tools on Turning EN25 Alloy Steel

机译：TiAln-/ Alcrn涂层和未涂覆钨碳化物工具对零烯合金钢的可加工性研究
- 作者：T. Sampath Kumar;A. Vinoth Jebaraj;K. Sivakumar;P. Mathivanan
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
39.Experimental Studies on Different Proportions of CB-Filled Natural Rubber Composites with Precipitated Silica and Silica Gel

机译：沉淀二氧化硅和硅胶不同比例的不同比例的实验研究
- 作者：V. Chandran;N. Lenin;T. Maridurai;P. Jawahar;G. Vignesh;K. Sunil
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
40.Analysis of Dynamic Probing Errors in Measuring Machines

机译：测量机中动态探测误差分析
- 作者：Aitha Sudheer Kumar;C. Chandrasekaran
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
41.Design, Analysis, and Simulation of a Power-Split Device for Hybrid Two-Wheeler

机译：用于混合式两轮机的动力分配装置的设计，分析和仿真
- 作者：Enanko Moulick;Kiran P. Wani;Sanjay A. Patil
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
42.Stress Intensity Factors for a Plate with Slant Edge Crack Built with Rapid Manufacturing Process

机译：具有快速制造过程的倾斜边缘裂缝的板材应力强度因素
- 作者：M. Afzal Bhat;A. A. Shaikh
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
43.Numerical Modeling and Study of Vaporization of Single Droplet and Mono-dispersed Spray Under Mixed Convection Conditions

机译：混合对流条件下单液滴和单分散喷雾蒸发的数值建模与研究
- 作者：Sumer Dirbude;Abhijit Kushari;Vinayak Eswaran
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
44.Comparison of Quarter Car Suspension Model Using Two Different Controllers

机译：四分之一不同控制器的四分之一汽车悬架模型的比较
- 作者：Arivazhagan Anandan;Arunachalam Kandavel;Arockia Suthan Soosairaj
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
45.Impact of Control Unit Gains on Noise Mitigation in Swash Plate Pump Pumping Systems

机译：控制单元对斜盘泵泵系统噪声缓解的影响
- 作者：Molham H. Chikhalsouk;Khalid Zhouri;Chandra Somayaji;Monsif Shinneeb
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
46.Design Optimization, Automation and Testing Analysis of Dust Cleaning Mechanism for Solar Photovoltaic Power Plant

机译：太阳能光伏发电厂防尘机构的设计优化，自动化和测试分析
- 作者：P. A. Patil;J. S. Bagi;M. M. Wagh;G. S. Patil
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
47.Experimental Investigation of Vapour Absorption Refrigeration Cycle for Automobile Cabin Cooling

机译：汽车舱冷却蒸汽吸收制冷循环的实验研究
- 作者：Sahadev M. Jadhav;M. Arulprakasajothi;U. Chandrasekhar;D. Yuvarajan
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
48.Fuzzy Logic Simulation for Automatic Speed Control System

机译：自动速度控制系统模糊逻辑仿真
- 作者：Pajarla Saiteja
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
49.Discussion of Past, Present and Future Perspectives of Refrigerants and Its Future Scope

机译：讨论过去，现代和未来的制冷剂视角及其未来范围
- 作者：I. Vinoth Kanna;A. Devaraj
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
50.Numerical Prediction of Performance of a Double-Acting α-Type Stirling Engine

机译：双作用α型斯特林发动机性能的数值预测
- 作者：Hsi-Yao Yang;Yi-Han Tan;Chin-Hsiang Cheng
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
51.Numerical Investigation of Siting the Wind Turbine on Vel Tech University Campus

机译：临床风力涡轮机在velech大学校园的数值调查
- 作者：S. M. Vignesh;J. Karthik;R. Jaganraj
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
52.Study of Future Refrigerant for Vapor Compression Refrigeration Systems

机译：蒸汽压缩制冷系统未来制冷剂研究
- 作者：I. Vinoth Kanna;K. Subramani
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
53.Numerical Simulation of High Velocity Impact on Composite Targets Using Advanced Computational Techniques

机译：使用先进的计算技术对复合目标高速冲击的数值模拟
- 作者：K. Subramani;I. Vinoth Kanna
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
54.Performance Augmentation of Boron-HTPB-Based Solid Fuels by Energetic Additives for Hybrid Gas Generator in Ducted Rocket Applications

机译：硼 - HTPB基固体燃料的性能增强对管式火箭应用中的混合气体发生器的能量添加剂
- 作者：Syed Alay Hashim;Sanket Kangle;Srinibas Karmakar;Arnab Roy
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
55.A Review of Contemporary Research on Root Canal Obturation and Related Quality Assessment Techniques

机译：根管闭井及相关质量评估技术当代研究述评
- 作者：Pravin R. Lokhande;Deenadayalan;Ratnakar R. Ghorpade;S. R. Srinidhi
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年
56.Performance Analysis of Semi-active Suspension System Based on Suspension Working Space and Dynamic Tire Deflection

机译：基于悬架工作空间和动态轮胎挠度的半主动悬架系统性能分析
- 作者：Jaydeep Funde;K. P. Wani;N. D. Dhote;S. A. Patil
- 会议名称：《International Conference on Innovative Design , Analysis and Development Practices in Aerospace and Automotive Engineering》 | 2019年