首页>外文会议>其他>International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology

International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Numerical Calculation of Form Cutter Edge CAM

机译：刀具边缘凸轮的数值计算
- 作者：J. Kang
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
2.The Development of System for Measuring Hardness of Surface Coated Film

机译：测量表面涂膜硬度的系统
- 作者：Y.X.Yao;P.Gao;Z.J.Yuan;S.T.Huang
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- hardness;
- surface soated film;
- indentation;
3.A 3D CNCEDM Test Rig and Research Experiments of Using Fixed and Rotating Electrodes

机译：3D CNC EDM试验台和使用固定和旋转电极的研究实验
- 作者：Y. Liu;A. W. Duffill
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- electrical discharge machining (EDM);
- electrode;
4.The Way to Develop Heavy Grinding Technology

机译：培养磨损技术的方式
- 作者：G.Q.Cai;S.X.Yuan;M.Hu;C.Guo
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- heavy-duty grinding;
- productivity;
- grinding cost;
5.Precise Manufacture of Fernel Lens

机译：菲涅耳透镜的精确制造
- 作者：T. C. Zhao;X. B. Tao
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- fernel lens;
- pitch deviation;
- accuracy;
6.Study on the Turned Surface Formation Mechanism of Single Cermanium and Silicon

机译：单柑橘硅和硅的转向表面形成机制研究
- 作者：G. Q. Shi;J. Y. Yu;W. S. Ma;R. J. Han;W. Hang
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- diamond turning;
- surface roughness;
- single crystal;
7.Development of Micro-EDM Machine

机译：微EDM机的开发
- 作者：J.Q.Zhang;H.Y.Wei;W.S.Zhao;S.C.Di
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- electrical discharge maching;
- micro-electrode;
- micro-hole;
8.A Technology of Dynamic Tool Management in CIMS

机译：CIMS动态工具管理技术
- 作者：Y. Q. Jia;P. X. Wang
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- tool system;
- tool management;
- CIMS;
9.The Quest for Relevance in Engineering Education: Interrelationships between Academia and Industry in Japan and the U.S.

机译：探索工程教育中的相关性：日本学术界与工业的相互关系和美国
- 作者：R. H. Todd;T. Yamada
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
10.A Tool Setting Method and Error Analysis of Non-Spherical Laser Reflector in Ultra-Precision Manufacturing

机译：超精密制造中非球形激光反射器的工具设置方法及误差分析
- 作者：X. Y. Zhang
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- ultra - precision;
- tool setting;
- non - spherical reflector;
11.Measurement of Sphericity Error in the Super Finished Airfloat Ball Bearings

机译：超级成品空气飞石球轴承中的球形误差测量
- 作者：Z.D. Jiang;G.Y. Yuan;T. Jin
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- super finishing;
- sphericity;
- convex function;
12.Basic Study On Profile Generation with Using No Datum

机译：使用没有数据的简介生成的基本研究
- 作者：I.Ogura;W.Gao;S.Kiyono;H.Koiwa
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- in-process measurement;
- three-point method;
- pressure copying machining;
- absolute measurement;
13.A Study of the Tiny Hole Machining Technology for the Rigid and Brittle Material of Nonmetal

机译：非金属刚性脆性材料的微小孔加工技术研究
- 作者：C.B.Yu;H.P.Wang;Y.Xu
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- optimum;
- rigid and brittle nonmetal material;
- ultrasonic;
14.The Development of the Ultra-Precision Lapping Machine

机译：超精密研磨机的开发
- 作者：J. G. Fang;C. L. Liu;M. G. Wu
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- ultra-precision machine tool;
- lapping;
- design;
15.Study on EDG of Polycrystalline Diamond

机译：多晶钻石EDG研究
- 作者：R. M. Liu;J. C. Liu;Z. X. Jia
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- EDM;
- grinding;
16.Imitation Analysis of the Effect of Initial-Value Error on Straightness EST Method in Time-Domain

机译：初始值误差在时域中直线蚀刻的仿真分析
- 作者：L. Zhang;Y. Zhang;X. M. Yang
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- initial-value error;
- two-point and three-point method in time-domain;
- straightness;
17.Repetitive Control and Its Application to Precision Machining of Elliptical Pistons

机译：重复控制及其在椭圆活塞精密加工中的应用
- 作者：H.X.Zhou;X.K.Wang;J.R.Zhang
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- repetitive control;
- non-circular manufacturing;
- linear servomechanism;
18.Study on Structural Thermal Optimum Design and Thermal Deformation Control of Heavy-duty Precision NC Machine Tools

机译：重型精密NC机床结构热优化设计及热变形控制研究
- 作者：W. Wang;Z. C. Zhen
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- machine tool;
- thermal deformation control;
- optimum design;
19.The Intelligent CAD of Gear Shaving-Honing Cutter

机译：齿轮剃须刀智能CAD
- 作者：W.B. Li;Z. J. Chen;Z. G. Niu;P. Xu;J. Y. Chen;J. M.Liu;X. C. Tian;Z. H. Chen
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- gear shaving-honing cutter;
- intelligence CAD;
20.Experiments on Machining Ceramic Ring and Ball for All-ceramic Bearing

机译：全陶瓷轴承加工陶瓷环和球的实验
- 作者：J. Wang;X. L. Yang;Y. H. Wu;K. Zhang
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- ceramic bearing;
- lapping;
- grinding;
21.An Open Framework of Information Integration in CIMS:Product Data Management Based Engineering Database Management Environment

机译：CIMS中的信息集成框架：基于产品数据管理的工程数据库管理环境
- 作者：Y.B. Xia;Y.F.Zhang;J.Y.Zhang;X.K.Wang
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- CIM;
- information;
- flexible;
22.A Quick Method of Judging the Tool Life of Precision Cutting Tool

机译：一种快速判断精密切削工具刀具寿命的方法
- 作者：B.Y. Sun;J. Zhang;M. Qian
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- quick method;
- precision cutting;
- tool life;
23.T-ratio- a New Stability Criterion for Rounding Process in Shoe Centerless Grinding

机译：T-比率 - 鞋无心磨削中的圆形过程的新稳定性标准
- 作者：Z.X.Gan;Z.Q.Zhu
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- centerless grinding;
- lobing control;
- stability analysis;
24.Developing of Billets Snagging Robot

机译：雪纺机器人的发展
- 作者：M. Hu;G.Q. Cat;S.X.Yuan
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- snagging;
- robot;
25.Evaluation and Optimal Design of Six Axis Force Sensors

机译：六轴力传感器的评估和最优设计
- 作者：X.B.Chen;Z.J.Yuan;A.Geddam
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- force sensors;
- model;
- criterion;
- optimal design;
26.An Automatic Method of Polishing on Mould Free Curved Surfaces by Robot

机译：机器人对模具自由弯曲表面抛光的自动抛光方法
- 作者：L. Zhang;J. Zhao;M. Z. Tao;X. Y. Liu
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- robot;
- polishing;
- automation;
27.Study on Machining Free Surface of Die Shaped Cavity with Ultrasonic Electrolysis Polishing

机译：超声电解抛光加工模具形腔加工表面的研究
- 作者：X.D.Tan;Z.X.Zhou;Z.L.Wang;Z.N.Sun;C.S.Zhu;J.Chen;D.S. Wang;T. Pang
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- ultrasonic electrolysis polishing;
- die cavity;
28.An Evaluation of Contact Length Models and Model Application in Abrasive Machining Process

机译：磨料加工过程中接触长度模型及模型应用的评价
- 作者：H.S. Qi;W.B. Rowe;B. Mills;H.W. Zheng
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- grinding;
- contact length;
- modelling;
- model application;
29.A Review of the Use of Rubber and Nrcthane in the Forming of Metal Sheets

机译：橡胶和NRCTHANE在金属板形成中的述评
- 作者：F.W.Travis
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- rubber;
- urcthanc;
- flexible tooling;
- cups;
- deep drawing;
- hydro-forming;
30.A Study of Rotary Cutting Machining

机译：旋转切割加工研究
- 作者：X. F. Li;B Zhao;X. J. Shi
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- rotary cutting tool;
- cutting force;
- tool wear;
31.Investigation on the Relationship Between the Formation of Microcrack Around Impurities and the Sheeting with SEM in Cutting Process

机译：切割过程中杂质微裂纹形成关系的研究
- 作者：G. J. Ma;Y. Q. Liu
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- SEM;
- microcrack;
- impurity;
- sheeting;
32.SIP: an Integrated Process Planning System

机译：SIP：综合流程规划系统
- 作者：J.L.H.Luo;W.C.K.Wong;J.Q.Yan;Q.Zhang
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- computer aide process planning;
33.Data Acquisition and Processing System for Coaxality Error of Large Dimension Shaft

机译：大尺寸轴同轴误差的数据采集与处理系统
- 作者：X. S. Hu;Y. Zhang;P. Liu;C. Jiang
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- coaxality error;
- mathematical model;
- data acquisition;
- data processing;
- on-line measurement;
34.Development of the Model XWY-1 Form and Position Error Measuring Instrument

机译：XWY-1模型的开发和定位误差测量仪
- 作者：P. Liu;Y. Zhang;X. S. Hu;L. J. Chen
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- form and position errors;
- measuring instrument;
35.Full-Automatic CNC Roll Grinding Machine for Roll Manufactures

机译：全自动数控轧辊磨床，用于轧辊制造商
- 作者：Hiroshi Uchimura
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- roll grinding machine;
- automatic programming;
- full-automatic operation;
- sizing grinding;
36.Design For Manufacture and Product Structuring

机译：制造和产品结构设计
- 作者：Y. L. Wang;Y. J. Zhang;X. Leng
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- design;
- manufacturing;
- product structuring;
37.Performance Improvement in Multi-axis CNC Machine Tools by Quasistatic Error Compensation

机译：通过Quasistatic误差补偿，多轴CNC机床的性能改进
- 作者：X.B.Chen;A.Geddam;Z.J.Yuan
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- quasistatic errors;
- model;
- error compensation;
- nonlinearity;
38.Investigation on the Design of Absolute Zero Positioning Systems

机译：绝对零定位系统设计的研究
- 作者：B. P. Zhang;J. Q. Xu
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- grating;
- pertain;
- design;
39.Selection of Technology Parameters in Centriful Barrel Finishing

机译：离心筒精加工技术参数的选择
- 作者：M. Z. Wang;Y. Y. Guo
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- deburring;
- abrasive;
- barrel;
40.Application of Neural Network in Identification of Cutter Wear for Drilling Glass

机译：神经网络在钻孔玻璃刀具识别中的应用
- 作者：W. P. Wang;Q. Li
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- neural network;
- cutter wear;
- drilling glass;
41.Machinability of Brittle Materials for Optical Applications

机译：光学应用脆性材料的可加工性
- 作者：W. B. Lee;X. M. Lu
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
42.The Influence of Annular Seal parameters Variation on Water Pump Performance and its Sensitivity Analysis

机译：环形密封参数变化对水泵性能的影响及其敏感性分析
- 作者：X. M. Zhang;L. Li;S. Yu;W. He;C. B. Zhang
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- sealing;
- dynamic;
- design;
43.Wear Mechanism of CBN Tools in Finishing Hardened Steels

机译：CBN工具在整理硬化钢磨损机制
- 作者：W.J. Ding;H. T. Zhang;X. D. Li
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- cubic boron nitride;
- finishing;
- wear;
44.Effects of Microstructural Factor on Ductile Mode Grinding for Brittle Materials

机译：微观结构因子对脆性材料延性模式研磨的影响
- 作者：Toshiroh Shibasaka
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- ductile-brittle transition;
- brittle material;
- grinding;
- micromachining mechanics;
45.Study on NC Forming Ultra-precision Electrolytic and Mechanical Polishing to the Surface of Dies Cavity(I)

机译：NC形成超精密电解和机械抛光在模腔表面（I）
- 作者：Z.L.Wang;Z.N.Sun;X.D.Tan;Z.X.Zhou;C.S.Zhu;J.Chen;D.S.Wang;Y.T.Li;T.Pang;H.Hashimoto
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- dies cavity;
- ultra-precision;
- polishing;
46.CNC Precision Turning System for Workpiece with Non-circular Cross Section

机译：非圆形横截面工件的CNC精密转动系统
- 作者：X.K.Wang;D.Wu;J.L.Liu;J.R.Zhang
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- precision turning;
- non-circular;
- micro-feed;
47.Study on Advanced High-efficient Ceramic Tool and Its Application

机译：高效陶瓷工具及其应用研究
- 作者：C.Z.Huang;X.Ai;J.Q.Zhou
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- ceramic;
- performance;
- wear;
48.A Quick Approach of Arrangement for Machine Tool Layout

机译：一种机床布局的快速布置方法
- 作者：J. Chen;X. B. He;Z. F. Xiang
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- algorithm;
- arrangement;
- layout;
- machine tool;
49.Analysis of Key Technologies for Main Spindle System Involved in Superhigh Speed Grinding

机译：超高速磨削涉及主轴系统关键技术的分析
- 作者：W. Z. Liu;C. Guo;G. L. Song;G. Q. Cai
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- super-high speed grinding;
- main spindle;
- bearing;
- lubrication;
50.Comparison and Analysis of The Effect of Initial-value Error on Three -Point Straightness EST Methods in Frequency-domain and Time-Domain

机译：初值误差在频域和时域三点直线蚀刻方法的比较与分析
- 作者：L. Zhang;J. Q. Jin;Y. Zhang
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- initial-value error;
- time and frequency domain;
- straightness error;
51.Grinding Performance of Superabrasive Wheel Dressed by Gentle Wet Blasting

机译：温和潮湿爆破的超级磨损轮的研磨性能
- 作者：H.Yagishita;Y.Sakai
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- superabrasive wheel;
- dressing;
- gentle wet blasting;
52.Several Kinds of Drills for Drilling Precision Holes

机译：用于钻孔精密孔的几种钻头
- 作者：S. Q.Wang;Z. F.Liu;H. Peng
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- twist drill;
- accuracy;
- hole;
53.A Servo Control System for NC Machine Tools Using Sliding Mode Variable Structure

机译：使用滑模变量结构的NC机床伺服控制系统
- 作者：Z. Q. Yu;P. Su
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- simulation;
- control;
54.Development of Universal Type Polishing Device for Magnetic Abrasive Polishing and its Applications to Fine Polishing

机译：磁磨料抛光通用型抛光装置的开发及其在细抛光中的应用
- 作者：Kiyoshi SUZUKI;Tetsutaro UEMATSU;Takayuki KITAJIMA;Naoto KANEKO;Kenichi KUMAKURA
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
55.An Expert System for the Scheme Design of Machining Center

机译：加工中心方案设计专家系统
- 作者：W. L. Wang;Y. W. Zhao;S. Huang
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- expert system;
- scheme design;
- machining center;
56.Development of a Hypermedia Based Design Support System for Externally Pressurised Journal Bearings

机译：基于超媒体的外部加压期刊轴承的设计支持系统的开发
- 作者：K.Cheng
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- externally pressurised bearings;
- hypermedia;
- fesign support systems;
- artificial intelligence;
- expert systems;
57.Foundation of Kinetic Model of Vibration System and Mathematical Model of Dynamic Response to Workpiece and Cutting Tool in the Machining Process

机译：振动系统动力学模型的基础和加工过程中工件和切削工具的动态响应数学模型
- 作者：W. N Liu;F M Bai;W. D. Huang
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- workpiece;
- cutting force;
- vibration;
58.A New method of Precision Honing Inner Hole

机译：一种新的精密珩磨内孔方法
- 作者：Y. Huang;W. Liu;D. B. Liu
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
59.Development of Advanced Centerless Grinding Technique Applying ELID(Electrolytic In-Process Dressing) and Its Characteristics on Ceramic Parts Grinding

机译：ELID（电解于工艺敷料）高级无心磨削技术的开发及其对陶瓷部件研磨的特性
- 作者：W. Li;Hitoshi OHMORI;B. P. Bandyopadhyay;I.Takahashi;Toshio Ishii
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- ELID-centerless grinding;
- ceramics workpiece;
60.Probe into Theory of Circle-forming in Precision Deep-hole Boring and Reaming

机译：精密深孔镗孔和铰孔中圆形成理论的探讨
- 作者：Z. G. Zhao
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- boring;
- reaming;
61.A New Algorithm for NC Tool Path Generation

机译：一种新的NC工具路径生成算法
- 作者：Y. J. Ge;F. Guo;Q. Y. Wang
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- offset;
- mathematical model;
- CNC;
62.Putting Ceramic Tool to Rational Use

机译：将陶瓷工具置于合理使用
- 作者：W. C. Ye;F. Zhou
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- ceramic tool;
- duration of cutter;
- use;
63.Investigation of Surface Topography after Machining with Controlled Contact Length Tools

机译：控制接触长度工具加工后表面形貌的研究
- 作者：W.T.Liu
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
64.The Research on the Pre-grinding of Hob with High and Short Teeth

机译：高牙齿滚刀预研磨的研究
- 作者：Y. S. Tang;Y. G. Wei;X. G. Tong
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- high and short teeth;
- pre-grinding hob;
- tool life;
65.The Study of Precision Electrical Machining Process for Flexure Hinge

机译：精密电加工过程研究挠性铰链
- 作者：X.W.Li;Z.X.Jia;Y.F.Guo;J.Q.Zhao;J.C.Liu
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- flexure hinge;
- electrical discharge machining;
- pulse electrochemical machining;
66.Research on Surface Roughness of Deep Slot of Stainless Steel by Creep Feed Grinding

机译：蠕变饲料研磨深槽表面粗糙度研究
- 作者：Z.Y. Ma
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- creep feed grinding;
- surface roughness;
67.Modelling and Development of A Fixture-Workpiece System

机译：夹具工件系统的建模与开发
- 作者：A. Y. C. Nee;A. S. Kumar;J.Y. H. Fuh;M. A. Mannan
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- fixture;
- clamping;
- friction;
68.An Investigation into Dimensional Accuracy of Holes Drilled by Asymmetric General Purpose Twist Drills

机译：不对称通用捻钻钻孔尺寸精度的研究
- 作者：N.Z.Wu;E.J.A.Armarego
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- drilling;
- dimensional accuracy;
- optimization;
69.Experimental Researches on Bend, Tension and Torque Stresses of Multi-Stage Centrifugal Pump Rotor

机译：多级离心泵转子弯曲，张力和扭矩应力的实验研究
- 作者：S. B. Yu
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- rotary;
- stress;
- spectrum analysis;
70.Influences of Diamond Grit Selection on the Process of Sawing and Grinding of Stone

机译：金刚石砂砾选择对石材锯切和磨削过程的影响
- 作者：X.P.Xu;H.Huang;J.Y.Shen
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- diamond;
- sawing;
- grinding;
71.The New Technology of Gyrofinishing the Precision Shafts

机译：旋转精密轴的新技术
- 作者：Y.Y.Guo;M.J.Wang
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- gyrofinishing;
- shaft;
- surface quality;
72.Theoretical Investigation and Computer Simulation of the Dynamic Thrust and Torque in Vibration Drilling

机译：振动钻井动态推力和扭矩的理论研究与计算机仿真
- 作者：L.P.Wang;L.J.Wang;Z.J.Yang
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- vibration drilling;
- dynamic thrust and torque;
- computer simulation;
73.Movement Analysis of Plane Lapping With Solid Abrasive

机译：固体磨料平面研磨的运动分析
- 作者：J. D. Yang;L. M. Wang;H. Meng;C. G. Reng;L. J. Wang
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- lapping;
- motion study;
74.Progressive Gear Design and Precision Manlofacturing Methods

机译：渐进式齿轮设计和精密人类保护方法
- 作者：Q. X- Deng;W. T. Yang;C. Y. Cai
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- three-dimensional gear modification;
- precision gear machining;
- gear honing;
75.Research on Processing Parameter of Electrolytic Abrasive Mirror Finishing

机译：电解研磨镜精加工加工参数研究
- 作者：F. Y. Li;B. X. He;Z. J. Fan;G. Y. Song;X. Q. Hu;T. Z. Zhang
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- electrolyte;
- abrasion;
- mirror finishing;
76.Design and Machining Simulation of Tapered Milling Cutter with Constant Helical Angle

机译：恒定螺旋角度锥形铣刀的设计与加工模拟
- 作者：K. Z. Huang;Z. H. Wang;S. Zhang;X. Ai
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- milling cutter;
- computer-aided design;
77.Gear Hobbing Compensation Technology

机译：齿轮滚齿补偿技术
- 作者：P. Zheng;W. Wang;X. D. Shang;Y. G. Jing
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- gear;
- hobbing;
- compensation;
78.CAM Model for A New Type of Eight-Axis CNC Tool and Cutter Grinder with Five-Axis Simultaneous Control

机译：用于新型八轴CNC工具和刀具研磨机的CAM模型，具有五轴同时控制
- 作者：F.Guo;R.D.Wang;Q.Y.Wang;B.R.Li;W.J.Wu;B.Li
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- CNC;
- grinding;
- CAM.;
79.A Research into Chip Break Effect of Three-dimensional Groove Typical Geometric Unit

机译：三维凹槽典型几何单元碎片断裂效应研究
- 作者：Z.J. Li;Y.H. Xu;G.M. Qu;F.G. Yan;Y.F. Liu
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- complicated three-dimension chip-breaking groove;
- typical geometric unit;
- chip controlling;
80.Study on Predictability of the Life for YT15 Cemented Carbide Inserts

机译：YT15硬质合金刀片寿命预测性研究
- 作者：S. Q. Chen;C. Z. Chen;F. Y. Zhang
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- carbide;
- life;
- predicting;
81.The Research on Optimum Parameters of Precision Lapping of Quartz Crystal

机译：石英晶体精密研磨优化参数研究
- 作者：J.L.Yuan;P.Gao
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- quartz crystal;
- precision lapping;
- optimum parameters;
82.A Study of Chip Flow for Effective Chip Control in Turning Operations

机译：转动操作中有效芯片控制的芯片流程研究
- 作者：J.Wang
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- turning;
- machining;
- chip flow;
- chip control;
83.Tooth Profile Design of Spur Gear Shaping Cutter with High-precision

机译：高精度牙齿齿轮成型刀具的牙齿轮廓设计
- 作者：W. L. Guo;G. Ya;M. Lu;X.H. Zhang
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- forming of spur gear shaping cutter;
- mathematical model;
84.Generating Mechanism of the Surface Micro-texture of Magnetic Disc Substrate in Polishing

机译：抛光磁盘基板表面微观纹理的产生机理
- 作者：Y.S.Lu;G.Q.Cai;M.Hu;H.W.Zheng
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- polishing;
- magnetic disc substrate;
- surface texture;
85.The Determination of Characteristic Parameters and Threshold of Acoustic Emission in Grinding

机译：研磨中声发射的特征参数和阈值的确定
- 作者：W. S. Wang;Y. D. Gong
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- acoustic emission;
- grinding detecting;
- characteristic threshold;
86.To Guarantee the Statistics Dimension Tolerance by Adjusting Technology System

机译：通过调整技术系统来保证统计尺寸尺寸容差
- 作者：Y.B.Zhang
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- statistics dimension tolerance;
- probability;
- dimension zone;
87.Simulation on the Machine Tools Arrangement in the Random Production Process

机译：随机生产过程中机床布置的仿真
- 作者：Z. F. Xiang;J. Chen;X. B. He;S. Y. Zhong
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- simulation;
- machine tool;
- random;
88.Experimental Investigation on High Efficiency Cylindrical MAf

机译：高效圆柱MAF的实验研究
- 作者：W. L. Tie;S. Liang;X. Y. Jia;K. L. Zhang
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- magnetic abrasive finishing;
- magnetic pole;
- magnetic abrasive;
89.Some Fundamental Findings in Ductile Grinding Various Brittle Materials

机译：韧性磨削各种脆性材料的一些基本发现
- 作者：Kenichiro Imai;Hiroshi Hashimoto
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
90.Automatic Programming System for NC Machining of The Rotary Components

机译：用于旋转部件的NC加工自动编程系统
- 作者：Q. Y. Liu;D. K. Ma
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- rotary component;
- NC machining;
- automatic programming;
91.Detection and Prediction of Fault of Manufacturing Quality for FMS

机译：用于FMS的制造质量故障的检测与预测
- 作者：Z.J.Zhang;X.Y.Wang;X.Y. Zhu;X.QLian
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- quality;
- expert system;
- fuzzy;
92.Precision NC Grinding of Free-form Glass Lens

机译：自由玻璃透镜的精密NC研磨
- 作者：Y. Cheng;Q. S. Li;Z. J. Feng;J. S. Wang
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- free-form glass lens;
- precision NC grinding;
93.Math Modeling of Static Forces on Magnetic Grains in MAf

机译：MAF中磁性粒度静力的数学建模
- 作者：W L. Tie;S. Liang;X. Y. Jia;K. L. Zhang
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- magnetic abrasive finishing;
- magnetic force;
- magnetic abrasive grain;
94.Cryogenic Grinding of Brittle Materials

机译：脆性材料的低温研磨
- 作者：H. D. Yu;S. Terashima;N. Morita;Y. Yoshida
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- indentation;
- cracking;
- low temperature;
- cryogenic grinding;
95.Research on Systematic Computer-Aided Design (SCAD) Method of Mechanical Products

机译：机械产品系统电脑辅助设计（SCAD）方法研究
- 作者：Y. H. Dai;J. G. Wang;Z. F. Xiang;Y. C. Deng;Z. J. Deng
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- computer aided design(CAD);
- systematic engineering;
- design methodology;
96.Study of Ductile Iron Axle Sample's Mechanical Property Testing With Sonic Resonant Method

机译：Sonic Aryonant方法的韧性铁轴样本力学性能研究
- 作者：F. M. Bai;W. N. Liu;Y. X. Pan;G. P. Li;G. Q. Yin
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- acoustic test;
- vibration frequency;
- mechanical property;
97.Analysis of Overshooting Phenomena in Profile Measurement by Optical Stylus Sensor

机译：光学仪表传感器轮廓测量轮廓测量超排革现象分析
- 作者：P.Sun;S.Kiyono
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- optical stylus;
- edged profile;
- scratched surface;
- precision range;
- overshooting;
98.Integration of CAD and CAIP Information

机译：CAD和CAIP信息的整合
- 作者：Y. Lou;T. Zheng;G. J. Wang
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- computer aided design;
- coordinate measuring machine;
- information;
99.Modeling of Precision Machining Operations for Cutting Force Prediction

机译：切割力预测精密加工操作的建模
- 作者：O.Rosenberg;O.K.Ostafiev;D.Ostafiev
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- turning;
- milling;
- broaching;
- cutting;
- forces;
- modeling;
100.Study on the Cutting Performance of Whisker Reinforced Si_3N_4 Based Ceramic Tools

机译：基于晶须SI_3N_4陶瓷工具的切割性能研究
- 作者：Q. X. Yu;S. L. Mu;Q. Zhou;H. R. Le
- 会议名称：《International conference on precision engineering;Sino-Japan joint seminar on ultraprecision technology》 | 1996年
- ceramic whisker-reinforced;
- cutting tools;
- cutting performance;