首页>外文期刊>Tribology in Industry

Tribology in Industry

中文名称：工业摩擦学

ISSN：0354-8996
出版周期：Quarterly

发文量：496

期刊论文

热门论文

年度选择

更多>>

全选（0）

1.Impact of Heat Treatment Analysis on the Wear Behaviour of Al-14.2Si-0.3Mg-TiC Composite Using Response Surface Methodology

机译：Impact of Heat Treatment Analysis on the Wear Behaviour of Al-14.2Si-0.3Mg-TiC Composite Using Response Surface Methodology
- 作者：V. Anilkumar;K. V. Shankar;M. BalachandranJ. JosephS. NivedJ. JayanandanJ. JayagopanU. S. Surya Balaji
- 期刊名称：《Tribology in Industry》 | 2021年第4期
2.A Study on the Relationship Between Contact Pressures in a Grade2 TDN-UHMWPE Hip Implant: Young's Modulus and Poisson's Ratio

机译：A Study on the Relationship Between Contact Pressures in a Grade2 TDN-UHMWPE Hip Implant: Young's Modulus and Poisson's Ratio
- 作者：Myron Chernets;Yuriy Chernets;Jaroslaw Zubrzycki
- 期刊名称：《Tribology in Industry》 | 2022年第2期
- Hip joint implant;
- Calculation method;
- Maximum contact pressures;
- Tribological pair: grade2TDN - UHMWPE;
3.Studying the Temperature Characteristics of Oil at the Outlet From the K27-145 Turbocharger Rotor Bearing

机译：Studying the Temperature Characteristics of Oil at the Outlet From the K27-145 Turbocharger Rotor Bearing
- 作者：Gritsenko A.V.;Shepelev V.D.;Kaliyev B.K.
- 期刊名称：《Tribology in Industry》 | 2022年第4期
- Bearing;
- Engine oil;
- Lubrication system;
- Turbocharger;
- Turbocharging;
4.Wear Characteristic of ZrO2/MGO as Lubricant in Different Rotating Speed

机译：Wear Characteristic of ZrO2/MGO as Lubricant in Different Rotating Speed
- 作者：Saini D.S.;Matharu S.P.S.
- 期刊名称：《Tribology in Industry》 | 2022年第4期
- DOE;
- Nanofluid;
- Taguchi;
- Tribology;
- Zirconia;
5.Sliding Wear Investigation of Ni-based Coating for High-Temperature Application

机译：Sliding Wear Investigation of Ni-based Coating for High-Temperature Application
- 作者：S. W. Rukhande;W. S. Rathod;D. Bhosale
- 期刊名称：《Tribology in Industry》 | 2021年第2期
- NiCrBSiFe;
- Stainless steel 316L;
- Dry sliding wear;
- High temperature;
- High-velocity oxy-fuel;
6.Minimizing Tool Wear, Cutting Temperature and Surface Roughness in the Intermittent Turning of AISI D3 Steel Using the DF and GRA Method

机译：Minimizing Tool Wear, Cutting Temperature and Surface Roughness in the Intermittent Turning of AISI D3 Steel Using the DF and GRA Method
- 作者：Khelfaoui F.;Yallese M.A.;Boucherit S.Boumaaza H.Ouelaa N.
- 期刊名称：《Tribology in Industry》 | 2023年第1期
- AISI D3;
- GRA;
- Intermittent turning;
- Modeling;
- RSM;
7.A Preliminary Investigation of Physicochemical, Rheological and Tribological Properties of Bio-lubricant from Thevetia Peruviana Oil

机译：A Preliminary Investigation of Physicochemical, Rheological and Tribological Properties of Bio-lubricant from Thevetia Peruviana Oil
- 作者：Choudhury N.D.;Saha N.
- 期刊名称：《Tribology in Industry》 | 2022年第4期
- Bio-lubricant;
- Four-ball tribo-tester;
- Physicochemical;
- Thevetia Peruviana;
- Tribological;
8.Microstructure and Wear Resistance of Plasma Surface Layers Based of Alloy Mixture CuSn10/CrxCy

机译：Microstructure and Wear Resistance of Plasma Surface Layers Based of Alloy Mixture CuSn10/CrxCy
- 作者：Andrey Evgenievich Balanovskiy;Trieu Nguyen;Natalia Anatolyevna AstafevaHuy Vu
- 期刊名称：《Tribology in Industry》 | 2022年第2期
- Microstructure;
- Wear resistance;
- Tin-bronze;
- OK 84.78;
- Microhardness;
- Chemical composition;
- Clad layer;
- Plasma heating;
9.Computer Simulation and Optimization of Elliptic Bore Journal Bearing

机译：Computer Simulation and Optimization of Elliptic Bore Journal Bearing
- 作者：Sushanta Kumar Pradhan;Ramanuj Kumar;Prakash Chandra Mishra
- 期刊名称：《Tribology in Industry》 | 2022年第2期
10.Wear Studies on Phenolic Brake-Pads Using Taguchi Technique

机译：Wear Studies on Phenolic Brake-Pads Using Taguchi Technique
- 作者：F. F. Yusubov
- 期刊名称：《Tribology in Industry》 | 2021年第3期
- Wear;
- Composites;
- Brake-pads;
- Taguchi;
- ANOVA;
- Modeling;
- Optimization;
11.Friction Coefficient of Rubber Shoe Sole Sliding Against Different Rubber Floor Tiles

机译：Friction Coefficient of Rubber Shoe Sole Sliding Against Different Rubber Floor Tiles
- 作者：Mohamed Ahmed Ramadan
- 期刊名称：《Tribology in Industry》 | 2022年第2期
- Friction;
- 3D surface map;
- Rubber tiles;
- Grooved tiles;
- Slips and fall;
12.Evaluation of the Hardness and Wear Resistance of Alloyed Coatings From Fastening CuSn/CrxCy Mixture Hardened by Plasma and Laser

机译：Evaluation of the Hardness and Wear Resistance of Alloyed Coatings From Fastening CuSn/CrxCy Mixture Hardened by Plasma and Laser
- 作者：Trieu Nguyen;Natalya Anatolyevna Astafeva;Aleksandr Gennadievich TikhonovAndrey Evgenievich BalanovskiyHuy Vu
- 期刊名称：《Tribology in Industry》 | 2022年第1期
- Cu-Sn;
- CrxCy;
- Plasma treatment;
- Laser treatment;
- Reflow;
- Cracks;
- Microhardness;
- Wear resistance;
13.Parametric Optimization of Dry Sliding Wear Behavior of A356 Alloy-Zircon Composites

机译：Parametric Optimization of Dry Sliding Wear Behavior of A356 Alloy-Zircon Composites
- 作者：Kumar T.S.;Shalini S.;Priyadharshini G.S.Raghu R.
- 期刊名称：《Tribology in Industry》 | 2022年第4期
- A356 alloy;
- ANOVA;
- Refinement;
- Stir casting;
- Taguchi;
- Wear behaviour;
- Zircon;
14.Design of Experiment with Tribological Performance Analysis of Electroless Nano-composite Ni-P-SiC Coating for Conveyors

机译：Design of Experiment with Tribological Performance Analysis of Electroless Nano-composite Ni-P-SiC Coating for Conveyors
- 作者：Kumar S.;Ghosh S.K.;Pawar N.N.Rathod S.H.Chaudhari M.A.Bhagat R.R.Goli R.
- 期刊名称：《Tribology in Industry》 | 2022年第4期
- ANOVA;
- Electroless coating;
- Friction;
- Optimization;
- Wear;
15.An Experimental Study of Forced Vibration Influence on Disc Brake Drag Torque in Heavy Commercial Road Vehicles

机译：An Experimental Study of Forced Vibration Influence on Disc Brake Drag Torque in Heavy Commercial Road Vehicles
- 作者：Pontus Fyhr;Rikard Hjelm;Jens Wahlstrom
- 期刊名称：《Tribology in Industry》 | 2022年第1期
- Drag torque;
- Disc brake;
- Testing vibrations;
- Heavy commercial vehicles;
16.Multi-Objective Optimization of Sustainable Steel AISI 1045 Turning Energy Parameters Under MQL Condition

机译：Multi-Objective Optimization of Sustainable Steel AISI 1045 Turning Energy Parameters Under MQL Condition
- 作者：Sredanovic B.;Cica D.;Borojevic S.Tesic S.Kramar D.
- 期刊名称：《Tribology in Industry》 | 2022年第3期
- Genetic algorithm;
- Minimum quantity lubrication;
- Optimization;
- Response surface methodology;
17.Tribological Behavior of Calcium Complex Palm-Biogrease with Green Additives

机译：Tribological Behavior of Calcium Complex Palm-Biogrease with Green Additives
- 作者：I. H. A. Razak;M. A. Ahmad
- 期刊名称：《Tribology in Industry》 | 2021年第1期
- Palm-based ester;
- Biogrease;
- Calcium complex grease;
- CaCO_3;
- Hydroxyapatite;
18.Refining Used Lubricant Oils with Different Concentration Levels of Sulfuric Acid and Nonylphenol

机译：Refining Used Lubricant Oils with Different Concentration Levels of Sulfuric Acid and Nonylphenol
- 作者：Alvarez-Rivera J.A.;Castanon-Najera G.;Urrieta-Saltijeral J.M.Laines-Canepa J.R.Hernandez-Barajas J.R.Pampillon-Gonzalez L.Morales-Bautista C.M.
- 期刊名称：《Tribology in Industry》 | 2023年第1期
- Engine oils;
- Nonylphenol;
- Sulfuric acid;
19.Effect of Varying Stand-off Distance on Tribological and Mechanical Properties of Plasma Sprayed Hydroxyapatite Coated Metallic Substrates

机译：Effect of Varying Stand-off Distance on Tribological and Mechanical Properties of Plasma Sprayed Hydroxyapatite Coated Metallic Substrates
- 作者：Sachin Solanke;Vivek Gaval;Ravi ThakurAmit Pratap
- 期刊名称：《Tribology in Industry》 | 2022年第1期
20.Effect of Using Zinc Oxide Nano-particles as Antiwear and Anti-friction Additive in Mineral Oil for a Tribo-pair operating in Mixed Lubrication Regime

机译：Effect of Using Zinc Oxide Nano-particles as Antiwear and Anti-friction Additive in Mineral Oil for a Tribo-pair operating in Mixed Lubrication Regime
- 作者：Muzakkir S.M.;Hirani H.
- 期刊名称：《Tribology in Industry》 | 2022年第4期
- Lubricant additive;
- Mixed lubrication;
- Nano-particles;
- Wear;
- Zinc oxide;
21.Influence of the Structural State of the Mg-1Ca Magnesium Alloy on Tribological Properties

机译：Influence of the Structural State of the Mg-1Ca Magnesium Alloy on Tribological Properties
- 作者：Vladimir Semenov;Leva Shuster;Hsin-Chih LinSergey ChertovskikhOlga Kulyasova
- 期刊名称：《Tribology in Industry》 | 2022年第2期
22.Influence of Welding Position on Tribological Behavior of SS-309L Cladded Surface on 9Cr-1Mo Steel

机译：Influence of Welding Position on Tribological Behavior of SS-309L Cladded Surface on 9Cr-1Mo Steel
- 作者：V. D. Kalyankar;H. V. Naik
- 期刊名称：《Tribology in Industry》 | 2021年第2期
- 9Cr-1Mo steel;
- SS-309L;
- Flux cored arc welding (FCAW) welding position;
- Abrasive wear;
- Dilution;
- SEM;
- EDS;
23.Study on Changes in Hardness and Wear Resistance of 3D Printed Ti6Al4V with Heat Treatment Temperature

机译：Study on Changes in Hardness and Wear Resistance of 3D Printed Ti6Al4V with Heat Treatment Temperature
- 作者：Khun N.W.;Toh W.Q.;Liu E.
- 期刊名称：《Tribology in Industry》 | 2023年第1期
- 3D Printing;
- Hardness;
- Heat Treatment;
- Ti6Al4V;
- Wear;
24.The Innovative Research Methodology of Tribological and Rheological Properties of Lubricating Grease

机译：The Innovative Research Methodology of Tribological and Rheological Properties of Lubricating Grease
- 作者：R. Kozdrach
- 期刊名称：《Tribology in Industry》 | 2021年第1期
25.A Review of Mixed Lubrication Modelling and Simulation

机译：A Review of Mixed Lubrication Modelling and Simulation
- 作者：Ruchita Patel;Zulfiqar Ahmad Khan;Adil SaeedVasilios Bakolas
- 期刊名称：《Tribology in Industry》 | 2022年第1期
- Rolling contact;
- Mixed lubrication;
- Lubrication modelling;
- Simulation;
26.Investigation and Optimization for Performance Characteristics of Bump-type Foil Journal Bearings with Various Foil Materials

机译：Investigation and Optimization for Performance Characteristics of Bump-type Foil Journal Bearings with Various Foil Materials
- 作者：Mourya V.;Bhore S.P.
- 期刊名称：《Tribology in Industry》 | 2022年第4期
- Bump-type GFB;
- Design of experiment;
- Foil materials;
- GRA;
27.Abrasive Wear Resistance of Electrospark Coatings on Titanium Alloys

机译：Abrasive Wear Resistance of Electrospark Coatings on Titanium Alloys
- 作者：Mara Kandeva;Georgi Kostadinov;Todor PenyashkiValentin KamburovRayna DimitrovaSeryoja ValcanovAntonio NikolovBlagoj ElenovMikhail Petrzhik
- 期刊名称：《Tribology in Industry》 | 2022年第1期
- Wear resistance;
- Electrospark deposition;
- Titanium alloys;
- Coatings;
- Roughness;
28.Preparation and Tribological Properties of TiO2/WO3 Nanocomposite Lubricant

机译：Preparation and Tribological Properties of TiO2/WO3 Nanocomposite Lubricant
- 作者：Zhang X.;Du Q.;Xiong S.Peng C.
- 期刊名称：《Tribology in Industry》 | 2022年第4期
- Lubricants;
- Lubrication mechanism;
- Nanocomposite;
- TiO2;
- Tribology;
29.Experimental Investigations on Temperature and Frictional Behaviors of Textured Journal Bearings

机译：Experimental Investigations on Temperature and Frictional Behaviors of Textured Journal Bearings
- 作者：Kango S.;Sharma N.;Sharma R.K.Pandey R.K.
- 期刊名称：《Tribology in Industry》 | 2022年第3期
- Coefficient of friction;
- Journal bearing;
- Surface Texture;
- Temperature;
- Tribology;
30.Surface Saturation with Carbon Using Plasma Arc and Graphite Coating

机译：Surface Saturation with Carbon Using Plasma Arc and Graphite Coating
- 作者：V. H. Vu;A. E. Balanovskiy;V. T. DoanV. T. Nguyen
- 期刊名称：《Tribology in Industry》 | 2021年第2期
- Graphite paste;
- Liquid glass;
- Plasma arc;
- Microhardness;
- Equipment;
- Gas tungsten arc;
31.Waste Glass Powder as a Sustainable Abrasive Material for Composite Brake Block

机译：Waste Glass Powder as a Sustainable Abrasive Material for Composite Brake Block
- 作者：M. H. Palmiyanto;E. Surojo;D. AriawanF. Imaduddin
- 期刊名称：《Tribology in Industry》 | 2021年第3期
- Abrasive;
- Glass powder;
- Composite friction;
- Tribology properties;
- Thermal behaviour;
32.Optimization of Plasma Spraying Parameters with Respect to Shear Adhesion Strength of Cr3C2-NiCr Coating on 16Mn Steel

机译：Optimization of Plasma Spraying Parameters with Respect to Shear Adhesion Strength of Cr3C2-NiCr Coating on 16Mn Steel
- 作者：Dang Xuan Thao;Hoang Van Got;Pham Duc Cuong
- 期刊名称：《Tribology in Industry》 | 2022年第2期
- Plasma spraying;
- Cr_3C_2-NiCr;
- Coating;
- Shear adhesion;
- 16Mn steel;
- Optimization;
33.Analysis of Oil Distribution and Reduction of Axial Force due to Oil Supply in a Multi-Plate Clutch

机译：Analysis of Oil Distribution and Reduction of Axial Force due to Oil Supply in a Multi-Plate Clutch
- 作者：Daniel Groetsch;Rudi Motzet;Katharina VoelkelHermann PflaumKarsten Stahl
- 期刊名称：《Tribology in Industry》 | 2022年第2期
34.Effect of Exothermic Addition (CuO - Al) on the Structure, Mechanical Properties and Abrasive Wear Resistance of the Deposited Metal During Self-Shielded Flux-Cored Arc Welding

机译：Effect of Exothermic Addition (CuO - Al) on the Structure, Mechanical Properties and Abrasive Wear Resistance of the Deposited Metal During Self-Shielded Flux-Cored Arc Welding
- 作者：B. Trembach;A. Grin;V. SubbotinaV. VynarS. KnyazevV. ZakievI. TrembachO. Kabatskyi
- 期刊名称：《Tribology in Industry》 | 2021年第3期
35.Influence of Cutting Parameters on Surface Roughness in Grinding of 65G Steel

机译：Influence of Cutting Parameters on Surface Roughness in Grinding of 65G Steel
- 作者：D. D. Trung
- 期刊名称：《Tribology in Industry》 | 2021年第1期
- 65G steel grinding;
- Cutting parameter;
- Surface roughness model;
- Box-Cox transformation;
- Johnson transformation;
36.Lubrication of Radial Loaded Tapered Roller Bearings Under High Rotational Speeds

机译：Lubrication of Radial Loaded Tapered Roller Bearings Under High Rotational Speeds
- 作者：Gartner M.;Brecher C.;Neus S.Recker C.Franken M.Engelmann T.Wagler I.
- 期刊名称：《Tribology in Industry》 | 2023年第1期
- Grease lubrication;
- Oil-air lubrication;
- Radial loads;
- Speed capability;
- Spindle bearings;
- Tapered roller bearings;
- Temperature behavior;
- Tool spindle;
37.The Optimization of Microgeometric Parameters of Hydrodynamic Heavy Loaded Tribounits of a Forced Internal Combustion Engine

机译：The Optimization of Microgeometric Parameters of Hydrodynamic Heavy Loaded Tribounits of a Forced Internal Combustion Engine
- 作者：K. Gavrilov;V. Hudyakov;A. Rulevskiy
- 期刊名称：《Tribology in Industry》 | 2021年第3期
- Journal bearing;
- Multicriteria optimization;
- Microgeometric parameters;
38.Computational Method for Estimating Contact Parameters and Service Life of Cylindrical Metal-Polymer Sliding Guides

机译：Computational Method for Estimating Contact Parameters and Service Life of Cylindrical Metal-Polymer Sliding Guides
- 作者：M. Chernets;A. Kornienko;S. FedorchukYu. Chernets
- 期刊名称：《Tribology in Industry》 | 2021年第3期
39.Tribo-Modeling of Drilling Processes

机译：Tribo-Modeling of Drilling Processes
- 作者：G. S. Panagopoulos;P. G. Nikolakopoulos
- 期刊名称：《Tribology in Industry》 | 2021年第1期
- Drilling;
- FEM;
- Coating;
- Wear;
- H-13;
- WC;
- Adhesion;
- Temperature;
40.Investigation on the Mechanical and Wear Behaviour of Al-6082-BN-B_4C-Corn Cob Ash Hybrid Composites

机译：Investigation on the Mechanical and Wear Behaviour of Al-6082-BN-B_4C-Corn Cob Ash Hybrid Composites
- 作者：Manu Sam;N. Radhika;Valluri SidvilashT. Mohanraj
- 期刊名称：《Tribology in Industry》 | 2022年第2期
- Aluminum metal matrix composites;
- Stir casting;
- Wear rate;
- Wear resistance;
41.Estimation of Wear Performance of Al-based Composite Reinforced with Al_2O_3 and MoS_2 Using Taguchi Approach

机译：Estimation of Wear Performance of Al-based Composite Reinforced with Al_2O_3 and MoS_2 Using Taguchi Approach
- 作者：Hari Kiran Vuddagiri;Hota Ravisankar
- 期刊名称：《Tribology in Industry》 | 2022年第1期
- AMCs;
- Wear rate;
- Coefficient of friction;
- Alumina (Al_2O_3);
- Molybdenum disulfide (MoS_2);
42.Characteristics and Abrasive Wear Resistance of Plasma Alloyed Layers Based on Tin Bronze and Chromium Carbide

机译：Characteristics and Abrasive Wear Resistance of Plasma Alloyed Layers Based on Tin Bronze and Chromium Carbide
- 作者：Balanovskiy A.E.;Van Trieu N.;Van Vinh N.Anatolievna A.N.
- 期刊名称：《Tribology in Industry》 | 2022年第3期
- Abrasive wear;
- Alloyed layer;
- Chromium carbide;
- Microhardness;
- Plasma heating;
- Structures;
- Tin-bronze;
43.Study of the Tribological Properties of Diffusion Coated NiTi Intermetallic on Cp Titanium

机译：Study of the Tribological Properties of Diffusion Coated NiTi Intermetallic on Cp Titanium
- 作者：Khosravi G.;Sohi M.H.;Ghasemi H.Karazmoudeh N.J.
- 期刊名称：《Tribology in Industry》 | 2022年第4期
- Cp titanium;
- Diffusion surface treatment;
- Friction coefficient;
- NiTi intermetallic;
- Wear;
44.Simulation of Misaligned Journal Bearings Using Neural Networks

机译：Simulation of Misaligned Journal Bearings Using Neural Networks
- 作者：Kyriakos A. Kokkinidis;Pantelis G. Nikolakopoulos
- 期刊名称：《Tribology in Industry》 | 2022年第1期
- Journal bearings;
- Neural networks FDM;
- Misalignment;
45.Predictive Assessment of Maximum Contact Pressures in Metal-on-Polymer Hip Joint Implants by Analytical Method and FEM

机译：Predictive Assessment of Maximum Contact Pressures in Metal-on-Polymer Hip Joint Implants by Analytical Method and FEM
- 作者：Chernets M.;Chernets Y.
- 期刊名称：《Tribology in Industry》 | 2023年第1期
46.Instrumented Scratch Testing of Metal Coatings Produced by Screen Printing (SP) and Aerosol Deposition (AD) Technology

机译：Instrumented Scratch Testing of Metal Coatings Produced by Screen Printing (SP) and Aerosol Deposition (AD) Technology
- 作者：N. Laszlo
- 期刊名称：《Tribology in Industry》 | 2021年第4期
- BaTiO_3;
- Screen printing;
- Aerosol deposition;
- Coating;
- Scratch;
- Friction;
47.Drilling of Holes in Aluminum Matrix Composites at Dry and with the Minimum Quantity Lubrication of the Cutting Zone

机译：Drilling of Holes in Aluminum Matrix Composites at Dry and with the Minimum Quantity Lubrication of the Cutting Zone
- 作者：P. Karolczak;D. Poros;H. Skowronek
- 期刊名称：《Tribology in Industry》 | 2021年第3期
- Composite materials;
- Drilling;
- Surface roughness;
- Roundness deviation;
- Cutting forces;
- Chips;
48.Experimental and Statistical Study of Surface Roughness in CNC Slot Milling of AL 7075 Alloy Using Full and Fractional Factorial Design

机译：Experimental and Statistical Study of Surface Roughness in CNC Slot Milling of AL 7075 Alloy Using Full and Fractional Factorial Design
- 作者：Nikolaos Fountas;Kyriaki-E. Aslani;John KechagiasPanagiotis KyratsisNikolaos Vaxevanidis
- 期刊名称：《Tribology in Industry》 | 2022年第2期
- Slot milling;
- Surface roughness;
- AL 7075 aluminum alloy;
- Full factorial design;
- Fractional factorial design;
49.Load Capacity Comparison of Different Wet Multi-Plate Clutches with Sinter Friction Lining with Regard to Spontaneous Damage Behavior

机译：Load Capacity Comparison of Different Wet Multi-Plate Clutches with Sinter Friction Lining with Regard to Spontaneous Damage Behavior
- 作者：Schneider T.;Bedrikow A.B.;Volkel K.Pflaum H.Stahl K.
- 期刊名称：《Tribology in Industry》 | 2022年第3期
- Damage behavior;
- Load capacity of clutches;
- Multiple plate clutch;
- Scuffing;
- Sinter friction lining;
- Spontaneous damage;
- Wet friction clutch;
50.Mathematical Modeling of Journal Bearing Lubricated with Non-Newtonian Fluid

机译：Mathematical Modeling of Journal Bearing Lubricated with Non-Newtonian Fluid
- 作者：M. Kouider;Z. Djallel;Y. AbdelkaderK. Sahraoui
- 期刊名称：《Tribology in Industry》 | 2021年第4期
- Journal hydrodynamic bearing;
- Finite difference method;
- Non-Newtonian lubricants;
- Walther equation;
- Reynolds equation;
51.The Mathematical Model of Motion Trajectory of Wear Particle Between Textured Surfaces

机译：The Mathematical Model of Motion Trajectory of Wear Particle Between Textured Surfaces
- 作者：V. Marchuk;M. Kindrachuk;Ya. KrysakO. TisovO. DukhotaY. Gradiskiy
- 期刊名称：《Tribology in Industry》 | 2021年第2期
- Dimple;
- Indentation;
- Textured surface;
- Trajectory of motion;
- Wear particle;
- Mathematical model;
- Internal magnetic field;
52.Influence of Feed Motion on Surface Friction of AISI 1045 Steel Machined by a Fine-Grinding Process

机译：Influence of Feed Motion on Surface Friction of AISI 1045 Steel Machined by a Fine-Grinding Process
- 作者：V.-H. Pham;T.-D. Nguyen
- 期刊名称：《Tribology in Industry》 | 2021年第1期
- Surface grinding;
- Surface friction;
- Anisotropy surface;
- Anisotropy surface friction;
53.Design and Development of Hot Vapour Polishing System and Optimization of It’s Process Parameters for FDM Printed Parts

机译：Design and Development of Hot Vapour Polishing System and Optimization of It’s Process Parameters for FDM Printed Parts
- 作者：Kishore S.R.;Mathew A.;Tomy A.T.Sugavaneswaran M.John Rajan A.
- 期刊名称：《Tribology in Industry》 | 2022年第4期
54.A Fundamental Investigation of the Tribological Performance of Mahua-Castor Blend in a Four-Ball Tester

机译：A Fundamental Investigation of the Tribological Performance of Mahua-Castor Blend in a Four-Ball Tester
- 作者：Suresha B.;Padmanabha A.;Ramesh A.Shirankallu I.P.Ramalingappa S.C.M.
- 期刊名称：《Tribology in Industry》 | 2022年第3期
- Accelerometer;
- Fourball tester;
- Lubrication;
- Mahua‐castor oil blend;
- Wear rate;
55.An Overview of the Mechanical and Tribological Characteristics of Non-Ferrous Metal Matrix Composites for Advanced Engineering Applications

机译：An Overview of the Mechanical and Tribological Characteristics of Non-Ferrous Metal Matrix Composites for Advanced Engineering Applications
- 作者：Wadhwa A.S.;Chauhan A.
- 期刊名称：《Tribology in Industry》 | 2023年第1期
- Design of experiments;
- Mechanically mixed layer;
- Non ferrous;
- Reinforcement;
- Tribo-mechanical;
- Vortex casting;
56.Influence of Humid Air Temperature on Friction Behavior in Pneumatic Cylinder

机译：Influence of Humid Air Temperature on Friction Behavior in Pneumatic Cylinder
- 作者：T.-D. Nguyen;V.-H. Pham
- 期刊名称：《Tribology in Industry》 | 2021年第1期
- Friction force;
- Frictional behavior;
- Sliding friction;
- Pneumatic cylinder;
- Temperature;
57.Tribological Characteristics of Manufactured Carbon Under Extreme Contact Conditions

机译：Tribological Characteristics of Manufactured Carbon Under Extreme Contact Conditions
- 作者：E. Ross;A. Ignatov;P. Stoyanov
- 期刊名称：《Tribology in Industry》 | 2021年第3期
- Aerospace tribology;
- Graphite;
- Thermal spray;
- Tribological coatings;
- Third bodies;
58.Microstructural Characterization, Residual Stress, and Mechanical Properties of Plasma Sprayed 8YSZ Thermal Barrier Coatings

机译：Microstructural Characterization, Residual Stress, and Mechanical Properties of Plasma Sprayed 8YSZ Thermal Barrier Coatings
- 作者：Nikhil Kadam;Ganesh Karthikeyan;Dhananjay KulkarniPrajakta Jagtap
- 期刊名称：《Tribology in Industry》 | 2022年第2期
- Thermal barrier coatings;
- Atmospheric plasma spray;
- Spray angle;
- Microstructure;
- Porosity;
- Residual stress;
- Thermal conductivity;
- Hardness;
- Roughness;
59.TIG Welding Methods of Repairing Steel Components with Stainless Steel Coatings

机译：TIG Welding Methods of Repairing Steel Components with Stainless Steel Coatings
- 作者：Muigai M.N.;Mwema F.M.;Akinlabi E.T.Jen T.-C.Fatoba O.S.Leso T.P.Obiko J.O.Mphasha P.
- 期刊名称：《Tribology in Industry》 | 2022年第3期
- Corrosion;
- Repair welding;
- Surface engineering;
- TIG welding;
- Wear;
60.Estimation and Optimization of Worm Drive Efficiency using Taguchi and Symmetric Quasi-D Optimal Methods

机译：Estimation and Optimization of Worm Drive Efficiency using Taguchi and Symmetric Quasi-D Optimal Methods
- 作者：Nguyen H.L.;Nguyen K.N.;Le M.M.
- 期刊名称：《Tribology in Industry》 | 2023年第1期
- Efficiency;
- Optimization;
- Power losses;
- Response surface;
- Worm drive;
61.Loop-the-Loop as a Real Tribomechanical System Applicable in Engineering Education

机译：Loop-the-Loop as a Real Tribomechanical System Applicable in Engineering Education
- 作者：J. Miljojkovic;V. Kocovic;A. KosaracK. Simunovic
- 期刊名称：《Tribology in Industry》 | 2021年第4期
- Energy losses;
- Loop-the-loop;
- Friction;
- Engineering education;
62.Dynamic Mechanical Analysis and Optimization of Hybrid Carbon-Epoxy Composites Wear Using Taguchi Method

机译：Dynamic Mechanical Analysis and Optimization of Hybrid Carbon-Epoxy Composites Wear Using Taguchi Method
- 作者：G. S. Divya;B. Suresha;H. M. SomashekarI. M. Jamadar
- 期刊名称：《Tribology in Industry》 | 2021年第2期
- Mono and hybrid composites;
- Surface treatment;
- Dry sliding wear;
- Dynamic mechanical analysis;
63.The Influence of Titanium as a Desferoidizing Element on the Stability of Production of Magnesium Cast Irons with Compacted Graphite

机译：The Influence of Titanium as a Desferoidizing Element on the Stability of Production of Magnesium Cast Irons with Compacted Graphite
- 作者：V. Aulin;V. Kropivny;O. KuzykO. LyashukM. BosyiY. VovkA. KropivnaM. SokolA. SenykL. Slobodyan
- 期刊名称：《Tribology in Industry》 | 2021年第4期
- Magnesium cast iron;
- Compacted graphite;
- Compact graphite cast iron;
- Despheroidizing elements;
- Gibbs energy;
64.Abrasive Wear Behavior of Centrifugally Cast Al Alloy Composites with TiB2 Reinforcement

机译：Abrasive Wear Behavior of Centrifugally Cast Al Alloy Composites with TiB2 Reinforcement
- 作者：Kilic H.;Savas O.
- 期刊名称：《Tribology in Industry》 | 2022年第3期
- Abrasive wear;
- Centrifugally cast;
- Composite;
- Taguchi Technique;
- TiB2;
65.Effect of TiO_2 and CuO Based Nanolubricants on the Static Thermal Performance of Circular Journal Bearings

机译：Effect of TiO_2 and CuO Based Nanolubricants on the Static Thermal Performance of Circular Journal Bearings
- 作者：R. K. Dang;S. S. Dhami;D. GoyalA. Chauhan
- 期刊名称：《Tribology in Industry》 | 2021年第3期
66.Tribological Performance of Acrylic Acid Modified Short Rattan Fibre Reinforced Epoxy Composite

机译：Tribological Performance of Acrylic Acid Modified Short Rattan Fibre Reinforced Epoxy Composite
- 作者：Behera S.;Mohanty J.R.;Pradhan M.Nath G.Mahanta T.K.
- 期刊名称：《Tribology in Industry》 | 2022年第4期
67.Investigations on Contact Pressures and Durability of Metal-Polymer Dry Sliding Bearings with Miniature, Small and Large Diameters

机译：Investigations on Contact Pressures and Durability of Metal-Polymer Dry Sliding Bearings with Miniature, Small and Large Diameters
- 作者：Chernets M.;Kornienko A.;Chernets Y.
- 期刊名称：《Tribology in Industry》 | 2022年第3期
68.Modeling and Prediction of Surface Roughness in the End Milling Process using Multiple Regression Analysis and Artificial Neural Network

机译：Modeling and Prediction of Surface Roughness in the End Milling Process using Multiple Regression Analysis and Artificial Neural Network
- 作者：Durovic S.;Stanojkovic J.;Lazarevic D.Cirkovic B.Lazarvic A.Dzunic D.Sarkocevic Z.
- 期刊名称：《Tribology in Industry》 | 2022年第3期
- Artificial neural network;
- Milling;
- Multiple regression analysis;
- Surface roughness;
69.Study on Frictional Properties of Fine Powder Materials

机译：Study on Frictional Properties of Fine Powder Materials
- 作者：Alexander Gritsenko;Sergey A. Baryshnikov;Vladimir ShepelevBeibit Kaliyev
- 期刊名称：《Tribology in Industry》 | 2022年第1期
- Triboengineering;
- Friction;
- Wear;
- Oil;
- Additive;
70.Effect of Filler Materials on Abrasive Wear Performance of Glass/Epoxy Composites

机译：Effect of Filler Materials on Abrasive Wear Performance of Glass/Epoxy Composites
- 作者：Suresha B.;Vidyashree S.;Bettegowda H.
- 期刊名称：《Tribology in Industry》 | 2023年第1期
- Bidirectional glass-epoxy composites;
- Ceramic fillers;
- Specific wear rate;
- Three-body abrasive wear;
- Wear volume;
71.Erosion Modeling of Coated Gate Valves

机译：Erosion Modeling of Coated Gate Valves
- 作者：Jong Hyok Ri;Razvan George Ripeanu;Alin Dinita
- 期刊名称：《Tribology in Industry》 | 2022年第1期
- Gate valve;
- Lubrication film;
- Erosion;
- Solid particles;
- Turbulent flow;
72.Effect of Saturated Fatty Acids on the Antiwear and Rheological Properties of Olive Oil

机译：Effect of Saturated Fatty Acids on the Antiwear and Rheological Properties of Olive Oil
- 作者：Charoo M.S.;Akhter F.;Hanief M.Shafi W.K.Nissar M.
- 期刊名称：《Tribology in Industry》 | 2023年第1期
- Bio-Lubrication;
- Fatty acids;
- SEM;
- Viscosity;
- Wear;
73.Development of Self-lubricating Polymeric Composites Based on PTFE

机译：Development of Self-lubricating Polymeric Composites Based on PTFE
- 作者：P. N. Petrova;O. V. Gogoleva;A. L. Fedorov
- 期刊名称：《Tribology in Industry》 | 2021年第4期
- Friction;
- Wear and lubrication;
- Porous materials;
- Spectroscopy;
- Adsorption;
- Polyolefins;
74.Wear Behavior of Graphic Brush for Motors in the High Humidity of Tropical Climate with Current

机译：Wear Behavior of Graphic Brush for Motors in the High Humidity of Tropical Climate with Current
- 作者：Pham V.H.;Le D.B.;Nguyen T.D.
- 期刊名称：《Tribology in Industry》 | 2022年第4期
- Commutator and brush wear;
- Commutator brushes;
- Humidity tropical climate;
75.Effect of Substrate Surface Roughness on the Tribological Properties of DLC-H Coatings on Tappet Valve

机译：Effect of Substrate Surface Roughness on the Tribological Properties of DLC-H Coatings on Tappet Valve
- 作者：F. O. Kolawole;S. K. Kolawole;L. B. VarelaA. KraszczukM. A. RamirezA. P. Tschiptschin
- 期刊名称：《Tribology in Industry》 | 2021年第2期
- Adhesion;
- DLC-H;
- Scratch;
- Substrate surface roughness;
- Wear;
76.Tribological Properties of Aqueous Carboxymethyl Cellulose/Uncaria Gambir Extract as Novel Anti-Corrosion Water-Based Lubricant

机译：Tribological Properties of Aqueous Carboxymethyl Cellulose/Uncaria Gambir Extract as Novel Anti-Corrosion Water-Based Lubricant
- 作者：Rahmadiawan D.;Fuadi Z.;Kurniawan R.Abral H.Ilhamsyah F.Arafat A.RifelinoSyahri B.Indrawan E.
- 期刊名称：《Tribology in Industry》 | 2022年第4期
- Anti-corrosion;
- Friction;
- Uncaria Gambir;
- Water-based lubricant;
77.Wear Influence on Performance of Conical Hydrodynamic Journal Bearing

机译：Wear Influence on Performance of Conical Hydrodynamic Journal Bearing
- 作者：Kamble D.H.;Phalle V.M.;Mantha S.S.
- 期刊名称：《Tribology in Industry》 | 2022年第3期
- Conical bearing;
- Eccentricity ratio;
- Journal bearing;
- Semi cone angle;
- Wear;
78.Sliding and Corrosion Wear of Magnetron Sputtered TiO_2 Films Deposited with Different Argon and Oxygen Mixtures

机译：Sliding and Corrosion Wear of Magnetron Sputtered TiO_2 Films Deposited with Different Argon and Oxygen Mixtures
- 作者：W. Aperador;J. Bautista-Ruiz;J. C. Caicedo
- 期刊名称：《Tribology in Industry》 | 2021年第2期
- Titanium oxide;
- Corrosion;
- Tribology;
- Titanium;
- Surface modification;
79.Tribological Analysis on Basalt/Aramid Hybrid Fiber Reinforced Polyimide Composites: An Alternate Brake Pad Material

机译：Tribological Analysis on Basalt/Aramid Hybrid Fiber Reinforced Polyimide Composites: An Alternate Brake Pad Material
- 作者：A. A. Jeya Kumar;N. P. Akshy Ramaseshan;T. Lakshmanan
- 期刊名称：《Tribology in Industry》 | 2021年第2期
- Polyimide;
- Basalt fiber;
- Aramid fiber;
- Pin-on-disc;
- Wear rate;
- Coefficient of friction;
80.Wheel Squeal Noise in Rail Transport: The Effect of Friction Modifier Composition

机译：Wheel Squeal Noise in Rail Transport: The Effect of Friction Modifier Composition
- 作者：Navratil V.;Galas R.;Klapka M.Kvarda D.Omasta M.Shi L.Ding H.Wang W.-J.Krupka I.Hartl M.
- 期刊名称：《Tribology in Industry》 | 2022年第3期
- Friction management;
- Friction modifier;
- Noise mitigation;
- Wheel squeal noise;
- Wheel-rail tribology;
81.Friction Modifiers Optimization on Tribological Properties of Non-asbestos Organic (NAO) Brake Pad by DoE-Taguchi Method

机译：Friction Modifiers Optimization on Tribological Properties of Non-asbestos Organic (NAO) Brake Pad by DoE-Taguchi Method
- 作者：Jamasri;H. S. B. Rochardjo;P. NawangsariA. T. Waskito
- 期刊名称：《Tribology in Industry》 | 2021年第2期
- Friction modifier;
- Taguchi method;
- ANOVA;
- S/N ratio;
- CoF stability;
- Wear;
82.A Review on Modeling and Stability Aspects of Gas Foil Bearing Supported Rotors

机译：A Review on Modeling and Stability Aspects of Gas Foil Bearing Supported Rotors
- 作者：Khamari D.S.;Kumar J.;Behera S.K.
- 期刊名称：《Tribology in Industry》 | 2023年第1期
83.Locally Resolved Residual Stress Measurements in (Al,Ti)N Coatings Using Raman Spectroscopy

机译：Locally Resolved Residual Stress Measurements in (Al,Ti)N Coatings Using Raman Spectroscopy
- 作者：Bernd Breidenstein;Nils Vogel;Harald BehrensMarcel DietrichJon M. Andersson
- 期刊名称：《Tribology in Industry》 | 2022年第1期
- Residual stress;
- PVD;
- Coating;
- Raman-spectroscopy;
- Titanium aluminum nitride;
- X-ray diffraction;
84.Improving the Resistance to Wear and Mechanical Characteristics of Cladding Layers on Titanium and its Alloys: A Review

机译：Improving the Resistance to Wear and Mechanical Characteristics of Cladding Layers on Titanium and its Alloys: A Review
- 作者：Ranjan R.;Das A.K.
- 期刊名称：《Tribology in Industry》 | 2023年第1期
- Laser cladding;
- Microwave cladding;
- Plasma arc cladding;
- Surface modification;
- TIG cladding;
- Titanium and its alloys;
85.Review of Friction Stir Processing (FSP) Parameters and Materials for Surface Composites

机译：Review of Friction Stir Processing (FSP) Parameters and Materials for Surface Composites
- 作者：S. Milenkovic;F. Zivic;Z. JovanovicA. RadovanovicP. LjusicN. Grujovic
- 期刊名称：《Tribology in Industry》 | 2021年第3期
- Friction stir welding (FSW);
- Friction stir processing (FSP);
- Composite coating;
- Ceramic reinforcements;
- Aluminium alloys;
- Wear;
86.Experimental Investigation on Roughness Parameters of 42CrMo4 Steel Surface During Nitrocarburizing Treatment

机译：Experimental Investigation on Roughness Parameters of 42CrMo4 Steel Surface During Nitrocarburizing Treatment
- 作者：Ghelloudj E.;Hannachi M.T.;Djebaili H.
- 期刊名称：《Tribology in Industry》 | 2022年第4期
- 42CrMo4 steel;
- Amplitude;
- Hybrid;
- Material ratio;
- Nitrocarburizing treatment;
- Roughness parameters;
- Spacing;
- Surface profilometer;
87.The Effect of the Use of Cutting Zone Minimum Quantity Lubrication and Wiper Geometry Inserts on Titanium Ti6Al4V Surface Quality After Turning

机译：The Effect of the Use of Cutting Zone Minimum Quantity Lubrication and Wiper Geometry Inserts on Titanium Ti6Al4V Surface Quality After Turning
- 作者：P. Karolczak;M. Kowalski;K. Raszka
- 期刊名称：《Tribology in Industry》 | 2021年第2期
- Titanium;
- Cutting zone cooling and lubrication;
- Insert geometry;
- Surface roughness;
88.Optimization of Abrasive Wear Parameters of Halloysite Nanotubes Reinforced Silk/Basalt Hybrid Epoxy Composites using Taguchi Approach

机译：Optimization of Abrasive Wear Parameters of Halloysite Nanotubes Reinforced Silk/Basalt Hybrid Epoxy Composites using Taguchi Approach
- 作者：S. M. Darshan;Bheemappa Suresha;Imran M. Jamadar
- 期刊名称：《Tribology in Industry》 | 2022年第2期
- Silk fibre;
- Basalt fibre;
- HNTs;
- Hybrid nanocomposites;
- Three body abrasive wear;
- Taguchi method;
89.Comparative Study of Tribological and Mechanical Properties Between Single Layers of Al_2O_3 and Si_3N_4 Deposited on AISI 316 Stainless Steel

机译：Comparative Study of Tribological and Mechanical Properties Between Single Layers of Al_2O_3 and Si_3N_4 Deposited on AISI 316 Stainless Steel
- 作者：E. Hernandez-Rengifo;C. H. Ortiz;C. H. HidalgoJ. A. BallesterosJ. C. Caicedo
- 期刊名称：《Tribology in Industry》 | 2021年第2期
- Physical vapor deposition PVD mechanical properties;
- Al_2O_3;
- Si_3N_4;
- Lubricated tribological properties;
90.Algorithm for Tribokinetic Modeling Tests of Triboconjuction Materials for Industrial Products

机译：Algorithm for Tribokinetic Modeling Tests of Triboconjuction Materials for Industrial Products
- 作者：O. I. Bogdanovych;T. M. A. Al-Quraan;V. V. TokarukJ. S. Haddad
- 期刊名称：《Tribology in Industry》 | 2021年第1期
- Friction;
- Wear resistance;
- Tribokinetic tests;
- Kinetic characteristics;
- Activation energies;
91.Effect of Dilution on Microstructure and Slurry Abrasive Wear Behaviour of Ni-Cr-Mo-W Coating on 304 Stainless Steel Deposited by Synergic Pulsed Gas Metal Arc Welding

机译：Effect of Dilution on Microstructure and Slurry Abrasive Wear Behaviour of Ni-Cr-Mo-W Coating on 304 Stainless Steel Deposited by Synergic Pulsed Gas Metal Arc Welding
- 作者：A. P. Thummar;S. P. Wanare;V. D. Kalyankar
- 期刊名称：《Tribology in Industry》 | 2021年第3期
92.Study of Vegetable Oil Based Biolubricants and Its Hydrodynamic Journal Bearing Application: A Review

机译：Study of Vegetable Oil Based Biolubricants and Its Hydrodynamic Journal Bearing Application: A Review
- 作者：Md M. Hussain;A. P. Pratap;V. R. Gaval
- 期刊名称：《Tribology in Industry》 | 2021年第4期
93.Comparative Investigations on Microstructure and Slurry Abrasive Wear Resistance of NiCrBSi and NiCrBSi-WC Composite Hardfacings Deposited on 304 Stainless Steel

机译：Comparative Investigations on Microstructure and Slurry Abrasive Wear Resistance of NiCrBSi and NiCrBSi-WC Composite Hardfacings Deposited on 304 Stainless Steel
- 作者：Vivek D. Kalyankar;Sachin P. Wanare
- 期刊名称：《Tribology in Industry》 | 2022年第2期
- Slurry abrasive wear resistance;
- NiCrBSi;
- NiCrBSi-WC;
- Microstructure;
- Plasma transferred arc welding;
- AISI 304 stainless steel;
94.Influence of Thermal Degradation on the Mechanical Properties of Coatings 8YSZ/Al_2O_3_n Subjected to Thermals Cycles

机译：Influence of Thermal Degradation on the Mechanical Properties of Coatings 8YSZ/Al_2O_3_n Subjected to Thermals Cycles
- 作者：Christian Ortiz Ortiz;Erick Hernandez-Rengifo;Julio Cesar Caicedo
- 期刊名称：《Tribology in Industry》 | 2022年第1期
- Thermal barrier coatings;
- Mechanical properties;
- Cyclic oxidation;
- Multilayer coating;
- Degradation thermal;
95.Assessing the Effects of Uncoated and Coated Electrode on Response Variables in Electrical Discharge Machining for Ti-6Al-4V Titanium Alloy

机译：Assessing the Effects of Uncoated and Coated Electrode on Response Variables in Electrical Discharge Machining for Ti-6Al-4V Titanium Alloy
- 作者：S. Shirguppikar;M. S. Patil;N. H. PhanT. MuthuramalingamP. V. DongN. C. TamB. T. TaiN. D. MinhN. V. Duc
- 期刊名称：《Tribology in Industry》 | 2021年第4期
- Titanium alloy;
- EDM;
- MRR;
- TWR;
- Coated electrode;
96.A Method to Evaluate Wear and Vibration Characteristics of CNC Lathe Spindle

机译：A Method to Evaluate Wear and Vibration Characteristics of CNC Lathe Spindle
- 作者：Hung Pham;Minh Tam Pham;Thuy Duong Nguyen
- 期刊名称：《Tribology in Industry》 | 2022年第2期
- CNC machine;
- CNC machine spindle;
- Spindle bearing;
- Spindle wear;
- The vibration of the spindle bearing;
97.Characterization, Fabrication and Dry Sliding Wear Analysis of Hybrid Aluminium 6061 Composite

机译：Characterization, Fabrication and Dry Sliding Wear Analysis of Hybrid Aluminium 6061 Composite
- 作者：A. Awasthi;N. Panwar;M. PantS. BalaM. D. SharmaA. Chauhan
- 期刊名称：《Tribology in Industry》 | 2021年第4期
- Al6061;
- Stir casting;
- Sliding wear;
- Red mud;
98.Study of the Formation of the Alloyed Surface Layer During Plasma Heating of Mixtures of Cu-Sn/CrXCY Alloys

机译：Study of the Formation of the Alloyed Surface Layer During Plasma Heating of Mixtures of Cu-Sn/CrXCY Alloys
- 作者：V. T. Nguyen;N. A. Astafeva;A. E. Balanovskiy
- 期刊名称：《Tribology in Industry》 | 2021年第3期
- Cu-Sn;
- CrxCy;
- Plasma heating;
- Tin-bronze;
- Thickness;
- Microhardness;
- Alloyed coating;
99.Experimental Investigation of Textured Inserts on Machining Performance of Al-MMC Using Taguchi Method

机译：Experimental Investigation of Textured Inserts on Machining Performance of Al-MMC Using Taguchi Method
- 作者：Devaraj Sandiri;Ramakrishna Malkapuram;Singaravel Balasubramaniyan
- 期刊名称：《Tribology in Industry》 | 2022年第1期
- Turning process;
- MMC;
- Textured inserts;
- Taguchi;
- ANOVA;
100.Machining Aspects of Al_2O_3 Nano Cutting Fluids - A Comparative Study

机译：Machining Aspects of Al_2O_3 Nano Cutting Fluids - A Comparative Study
- 作者：Mukkamala Usha;Gunji Srinivasa Rao
- 期刊名称：《Tribology in Industry》 | 2022年第1期

客服邮箱：kefu@zhangqiaokeyan.com

客服微信
服务号