首页> 外文期刊>Journal of Applied Polymer Science >Influence of the polymerization conditions on the rigidity of phenylnorbornene-ethylene copolymers made using ethylene bis (indenyl) zirconium dichloride and MAO
【24h】

Influence of the polymerization conditions on the rigidity of phenylnorbornene-ethylene copolymers made using ethylene bis (indenyl) zirconium dichloride and MAO

机译:聚合条件对使用双(茚基)二氯化锆和MAO制得的苯基降冰片烯-乙烯共聚物刚性的影响

获取原文
获取原文并翻译 | 示例
           

摘要

When characterized with DMA it was found that Phenylnorbornene - ethyl ene copolymers with equivalent comonomer concentrations had very different storage moduli in the glassy state as well as glass transition temperatures. NMR analysis of the copolymers revealed that they had different ratios of Exo- and Endo-diastereomers even if the same comonomer composition had been used. The Exo/Endo-ratio in the polymer was surprisingly higher than in the monomer and increased with higher incorporations of the comonomer. Copolymers with higher Exo/Endo-ratios also had a tendency for lower storage moduli in the glassy state and higher tan delta peaks. These properties are valuable because more flexible and impact-resistant copolymers are obtained. (C) 1998 John Wiley & Sons, Inc. [References: 14]
机译:当用DMA进行表征时,发现具有相同共聚单体浓度的苯基降冰片烯-乙烯共聚物在玻璃态以及玻璃化转变温度下具有非常不同的储能模量。共聚物的NMR分析表明,即使使用相同的共聚单体组成,它们也具有不同的外-非-和内-非对映异构体比率。聚合物中的Exo / Endo比率出乎意料地高于单体,并且随着共聚单体的掺入量增加而增加。具有较高的Exo / Endo-比率的共聚物还具有在玻璃态下较低的储能模量和较高的tanδ峰的趋势。这些性能是有价值的,因为获得了更柔韧性和抗冲击的共聚物。 (C)1998 John Wiley&Sons,Inc. [参考:14]

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号