• 主题
高级搜索  >
历史搜索 清空历史
首页> 外文期刊>Journal of Mechanical Science and Technology >Effects of Sb, Sr, and Bi on the material properties of cast Al-Si-Cu alloys produced through heated mold continuous casting
【24h】

Effects of Sb, Sr, and Bi on the material properties of cast Al-Si-Cu alloys produced through heated mold continuous casting

机译：Sb，Sr和Bi对加热结晶器连续铸造生产的铸造Al-Si-Cu合金材料性能的影响

获取原文
获取原文并翻译 | 示例
           
页面导航
  • 摘要
  • 著录项
  • 相似文献
  • 相关主题

摘要

Rare earth metals can create a fine eutectic Si structure in cast Al-Si-10.6-Cu-2.5 (ADC12) alloys produced through heated mold continuous casting. Fine and spherical eutectic Si phases are created in the ADC12 alloys through the addition of Sr0.04, and fine lamellar eutectic Si phases are created through Sb and Bi addition. Crystal orientation on the face perpendicular to the casting direction is formed by [110]; however, this uniform formation is collapsed in the ADC12 alloy with an increasing amount of Sr addition, such as Sr > 0.04%. The shape of the eutectic Si is statically analyzed, and the effects of the eutectic Si characteristics on the mechanical properties are examined experimentally. On the one hand, the mechanical properties of the ADC12-Sr alloy increase with increasing Sr content because of the fine eutectic Si, the randomly orientated crystal formation, and so on. On the other hand, the material ductility increases in the ADC12 alloy with increasing addition of Sb and Bi elements. A high fracture strain of approximately 14% is obtained for the ADC12-Bi1.5 alloy.
机译：稀土金属可以在通过加热的模具连续铸造生产的铸造Al-Si-10.6-Cu-2.5（ADC12）合金中产生良好的共晶Si结构。通过添加Sr0.04在ADC12合金中生成细的和球形的共晶Si相，通过添加Sb和Bi生成细的层状的共晶Si相。垂直于铸造方向的面上的晶体取向由[110]形成;然而，随着Sr添加量的增加（例如Sr> 0.04％），这种均匀的形成在ADC12合金中被破坏。静态分析了共晶硅的形状，并通过实验研究了共晶硅特性对机械性能的影响。一方面，由于细小的共晶硅，无规取向的晶体形成等，ADC12-Sr合金的机械性能随Sr含量的增加而增加。另一方面，随着Sb和Bi元素的添加，ADC12合金的材料延展性增加。 ADC12-Bi1.5合金可获得大约14％的高断裂应变。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号