首页> 外文期刊>Journal of Materials Engineering and Performance >Effect of Quartz Filler on Epoxy Coatings Behavior
【24h】

Effect of Quartz Filler on Epoxy Coatings Behavior

机译:石英填料对环氧涂料行为的影响

获取原文
获取原文并翻译 | 示例
           

摘要

The effect of quartz (0-60 wt. percent) on the mechanical, anticorrosive, and dielectric properties of pretreated steel coatings in a 3.5 wt. percent NaCl solution was studied by abrasion and impact resistance, pencil and Shore D hardness measurements, visual observations after salt spray tests, as well as by electrochemical impedance spectroscopy and water permeability measurements. Results revealed that coatings with a quartz load up to 30 percent exhibit a noticeable improvement of their mechanical characteristics as well as better dielectric and anticorrosive behavior than that of pure epoxy coatings. Further increase of the quartz content results in a lower degree of their behavior improvement or even in their worsening, with the exception of the coatings' surface hardness that increases with the increase of the quartz content.
机译:石英(0-60 wt。%)对3.5 wt。%的预处理钢涂层的机械,抗腐蚀和介电性能的影响。通过耐磨性和耐冲击性,铅笔和肖氏D硬度测量,盐雾试验后的目测观察以及电化学阻抗谱和透水性测量研究了NaCl溶液的百分含量。结果表明,与纯环氧涂料相比,石英负载量高达30%的涂料显示出机械性能的显着改善以及更好的介电和耐腐蚀性能。石英含量的进一步增加导致其行为改善的程度降低甚至恶化,除了涂层的表面硬度随石英含量的增加而增加外。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号