...
【24h】

Magnetic inductor based on nanosize amorphous metal powder

机译:基于纳米非晶态金属粉末的磁感应器

获取原文
获取原文并翻译 | 示例
           

摘要

Amorphous metal powders with sizes from 20-50 nm were prepared by the borohydride reaction of metal salts. The as-processed powders were observed to form chains of different lengths. Magnetic cores were fabricated from the powders compacted with epoxy resin. Following compaction, the powders remained in chains oriented randomly throughout the cores. The resultant magnetic behavior is such that the cores' BH curves are linear up to the applied field exceeding 100 Oe (8 kA/m). The magnetic chains are insulated by resin and the linear BH behavior is maintained in the frequency range beyond 10 MHz. These features are suited for applications in high-field sensors, linear inductors and the like. (c) 2007 Elsevier B.V. All rights reserved.
机译:通过金属盐的硼氢化物反应制备尺寸为20-50nm的非晶态金属粉末。观察到加工后的粉末形成不同长度的链。磁芯由用环氧树脂压实的粉末制成。压实后,粉末保留在整个核中随机定向的链中。最终的磁行为使得铁心的BH曲线在施加的磁场超过100 Oe(8 kA / m)时呈线性。磁链由树脂绝缘,并且线性BH行为保持在10 MHz以上的频率范围内。这些功能适用于高场传感器,线性电感器等。 (c)2007 Elsevier B.V.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号