首页> 外文期刊>Journal of Applied Polymer Science >SEM study of the morphologic change of high-density polyethylene surface grafted with glycidyl methacrylate
【24h】

SEM study of the morphologic change of high-density polyethylene surface grafted with glycidyl methacrylate

机译:甲基丙烯酸缩水甘油酯接枝的高密度聚乙烯表面形态变化的SEM研究

获取原文
获取原文并翻译 | 示例
           

摘要

Scanning electron microscopy (SEM) study of the morphologic change of high-density polyethylene (HDPE) surface grafted with glycidyl methacrylate (GMA) was reported. Radiation-induced grafting of GMA onto HDPE was carried out in acetone and dichloromethane solution, respectively. The effects of irradiation dose, atmosphere, and swelling time on grafting were investigated. Generally, the extent of grafting increased with irradiation dose, but for the grafting carried out in acetone solution, the extent of grafting initially increased with irradiation dose and then remained almost constant. The extent of grafting was higher in acetone solution than in dichloromethane solution at the same irradiation dose. The extent of grafting in nitrogen was higher than that in air. The successful grafting of GMA onto HDPE was confirmed by weighing and FTIR analysis. SEM investigations showed that the morphologies of the PE samples grafted in acetone solution were quite different to those grafted in dichloromethane. The grafting of GMA carried out in acetone was mainly on HDPE surface and that carried out in dichloromethane was mainly in the bulk of HDPE. (c) 2007 Wiley Periodicals, Inc.
机译:扫描电子显微镜(SEM)研究了接枝甲基丙烯酸缩水甘油酯(GMA)的高密度聚乙烯(HDPE)表面的形态变化。辐射诱导的GMA接枝到HDPE上分别在丙酮和二氯甲烷溶液中进行。研究了辐照剂量,气氛和溶胀时间对接枝的影响。通常,接枝程度随辐照剂量而增加,但是对于在丙酮溶液中进行的接枝,接枝程度最初随辐照剂量而增加,然后几乎保持恒定。在相同的照射剂量下,丙酮溶液中的接枝程度高于二氯甲烷溶液中的接枝程度。氮的接枝程度高于空气。通过称重和FTIR分析证实了GMA成功接枝到HDPE上。 SEM研究表明,在丙酮溶液中接枝的PE样品的形态与在二氯甲烷中接枝的PE样品的形态有很大不同。在丙酮中进行的GMA接枝主要在HDPE表面,而在二氯甲烷中进行的接枝则主要在HDPE中。 (c)2007年Wiley Periodicals,Inc.

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号