首页> 外文期刊>Journal of Applied Polymer Science >Blending PP with PA6 industrial wastes: Effect of the composition and the compatibilization
【24h】

Blending PP with PA6 industrial wastes: Effect of the composition and the compatibilization

机译:将PP与PA6工业废料共混:组成和相容性的影响

获取原文
获取原文并翻译 | 示例
           

摘要

Blending polypropylene to recycled PA6 industrial wastes at different compositions, with and without compatibilizer PPgMA was produced in a corotating twin screw extruder where, polypropylene acts as the polymer matrix and polyamide as the dispersed phase. Several techniques were used to investigate the morphology, thermal, viscoelastic and tensile properties of these blend. Binary PP/PA6 blends showed the presence of PA6 particles dispersed in the PP continuous phase and exhibited a coarse morphology. Increasing PA6 contents in the blend increased their crystallinity and their size and improved the tensile properties at weak deformation. In addition to compatibilizer PPgMA, the morphology shows lower diameters and a decrease in size of the dispersed PA6 particles. The interfacial adhesion was also improved, as a result of the creation of an interphase that was formed by the interaction between the formed PPgPA6 copolymer in situ and both phases. This interphase induced an improvement in tensile properties. The PPgPA6 copolymer generated by the interphase was identified with DMA analysis thanks to an additional transition in loss modulus curves. (c) 2007 Wiley Periodicals, Inc.
机译:在同向旋转双螺杆挤出机中,将聚丙烯与具有和不具有增容剂PPgMA的不同成分的再生PA6工业废料共混,其中聚丙烯充当聚合物基质,聚酰胺充当分散相。几种技术被用来研究这些共混物的形态,热,粘弹性和拉伸性能。二元PP / PA6共混物显示PA6颗粒分散在PP连续相中,并呈现出粗糙的形态。共混物中PA6含量的增加会增加其结晶度和尺寸,并改善弱变形时的拉伸性能。除了增容剂PPgMA,该形态还显示出较小的直径和分散的PA6颗粒的尺寸减小。由于形成了由形成的PPgPA6共聚物在原位和两个相之间的相互作用而形成的相,结果也改善了界面粘合性。该中间相引起拉伸性能的改善。由于损失模量曲线的额外跃迁,通过DMA分析鉴定了由相间生成的PPgPA6共聚物。 (c)2007年Wiley Periodicals,Inc.

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号