首页> 外文期刊>Journal of Applied Polymer Science >Mechanical and morphological properties of waste Eurycoma longifolia fiber/montmorillonite reinforced poly(vinyl chloride) hybrid composites
【24h】

Mechanical and morphological properties of waste Eurycoma longifolia fiber/montmorillonite reinforced poly(vinyl chloride) hybrid composites

机译:废弃的杜仲纤维/蒙脱土增强聚氯乙烯杂化复合材料的力学和形态学性能

获取原文
获取原文并翻译 | 示例
           

摘要

Hybrid composites are currently spearheading in polymer composites field with the promising ability in improving polymer properties. The influence of Eurycoma longifolia (EL)/montmorillonite (MMT) hybrid fillers loading on the mechanical properties of poly(vinyl chloride) (PVC) hybrid composites has been investigated. PVC resin and various additives were first dry-blended using a laboratory blender before being milled into sheets using two-roll mills at 165°C and hot pressed at 180°C and 120 kgm~(-2). The mechanical properties of PVC hybrid composites were determined using Izod impact, tensile, and flexural test. The incorporation of EL fiber into PVC matrix improved the flexural modulus, tensile modulus of PVC composites, whereas the tensile strength and impact strength decreased with increasing EL fiber content. The addition of MMT into EL-filled PVC composites has significantly increased the flexural modulus, tensile modulus of PVC hybrid composite compared to PVC composites. However, MMT decreased the flexural strength and impact strength of PVC hybrid composites.
机译:杂化复合材料目前在聚合物复合材料领域处于领先地位,具有改善聚合物性能的潜力。研究了长生Eurycoma(EL)/蒙脱土(MMT)杂化填料的添加量对聚(氯乙烯)(PVC)杂化复合材料的力学性能的影响。首先使用实验室搅拌机将PVC树脂和各种添加剂干混,然后使用两辊磨机在165°C下将其研磨成片,然后在180°C和120 kgm〜(-2)下热压。使用Izod冲击,拉伸和弯曲试验确定了PVC杂化复合材料的机械性能。将EL纤维掺入PVC基体中可改善PVC复合材料的弯曲模量,拉伸模量,而拉伸强度和冲击强度随EL纤维含量的增加而降低。与PVC复合材料相比,在EL填充的PVC复合材料中添加MMT可以显着提高PVC杂化复合材料的弯曲模量和拉伸模量。然而,MMT降低了PVC杂化复合材料的弯曲强度和冲击强度。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号