首页> 外文期刊>Journal of Applied Polymer Science >The Effect of Nonionic Monomer HAM on Properties of Cationic Surfactant-Free Acrylic/Alkyd Hybrid Emulsion
【24h】

The Effect of Nonionic Monomer HAM on Properties of Cationic Surfactant-Free Acrylic/Alkyd Hybrid Emulsion

机译:非离子型单体HAM对不含阳离子表面活性剂的丙烯酸/醇酸杂化乳液性能的影响

获取原文
获取原文并翻译 | 示例
           

摘要

A series of cationic acrylic/alkyd resin (CPAAR) hybrid emulsions was successfully prepared through surfactant-free emulsion polymerization, using methacryloxyethyltrimethyl ammonium chloride, methyl methacrylate, butyl acrylate and alkyd resin as reaction monomers. And nonionic N-hydroxymethyl acrylamide (HAM) of different content was simultaneously incorporated into the CPAAR backbone. The structure of CPAAR copolymer was characterized by Fourier transform infared spectrometer, and then the effect of HAM content on properties of CPAAR emulsions was studied by particle size analyzer, transmission electron microscopy and rheometer. In addition, thermal properties, water absorption and contact angle of CPAAR latex films were also investigated. The results showed that the CPAAR emulsions prepared with 4.9 wt % HAM displayed smallest average particle size of 92.2 nm. As HAM content increased from 0 to 19.6 wt %, the initial viscosity of the emulsions increased from 22.48 to 53 mPa.s. At the same time, the emulsions transferred from Newtonian fluid to pseudoplastic fluid, and a transition from viscous liquid to elastic liquid was also detected. Meanwhile, the degradation temperature at 5% weight loss increased by 30.59 degrees C. In addition, with increasing HAM content from 0 to 4.9 wt %, the water absorption and surface free energy of films increased by 4.42% and 5.02 mJ m(-2), respectively. However, the water absorption and surface free energy kept almost invariable with further increase in HAM content. (c) 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 41406.
机译:以甲基丙烯酰氧基乙基三甲基氯化铵,甲基丙烯酸甲酯,丙烯酸丁酯和醇酸树脂为反应单体,通过无表面活性剂乳液聚合成功制备了一系列阳离子丙烯酸/烷基树脂(CPAAR)杂化乳液。同时将不同含量的非离子型N-羟甲基丙烯酰胺(HAM)并入CPAAR主链。用傅立叶变换红外光谱仪表征了CPAAR共聚物的结构,然后通过粒度分析仪,透射电镜和流变仪研究了HAM含量对CPAAR乳液性能的影响。另外,还研究了CPAAR乳胶薄膜的热性能,吸水率和接触角。结果表明,用4.9 wt%HAM制备的CPAAR乳液显示的最小平均粒径为92.2 nm。随着HAM含量从0增加到19.6wt%,乳液的初始粘度从22.48增加到53mPa.s。同时,还检测了乳液从牛顿流体转移到假塑性流体,以及从粘性液体到弹性液体的转变。同时,失重5%时的降解温度增加了30.59℃。此外,随着HAM含量从0增加到4.9 wt%,薄膜的吸水率和表面自由能分别增加了4.42%和5.02 mJ m(-2) ), 分别。然而,随着HAM含量的进一步增加,吸水率和表面自由能几乎保持不变。 (c)2014 Wiley Periodicals,Inc. J. Appl。 Polym。科学2015,132,41406。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号