...
首页> 外文期刊>Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics >New high-epsilon and high-Q microwave dielectric ceramics: (1-x)Ca_(0.61)Nd_(0.26)TiO_3-xNd(Zn_(0.5)Ti_(0.5))O_3
【24h】

New high-epsilon and high-Q microwave dielectric ceramics: (1-x)Ca_(0.61)Nd_(0.26)TiO_3-xNd(Zn_(0.5)Ti_(0.5))O_3

机译:新型高ε和高Q微波介电陶瓷:(1-x)Ca_(0.61)Nd_(0.26)TiO_3-xNd(Zn_(0.5)Ti_(0.5))O_3

获取原文
获取原文并翻译 | 示例
           

摘要

New high-e and high-Q microwave dielectric ceramics (1-x)Ca_(0.61)Nd_(0.26)TiO_3-xNd(Zn_(0.5)Ti_(0.5))O_3 (x = 0.00-0.40, referred to as (1-x)CNT-xNZT) were prepared by conventional solid-state preparation route. Single orthorhombic perovskite phase was formed when x was not beyond 0.15. And a secondary phase Zn_2TiO_4 appeared for x = 0.20, while ZnO was the secondary phase for the ceramics with x above 0.20. The dielectric constant and temperature coefficient of resonant frequency decreased steadily with increasing x-value. High Qf-value of above 10,000 GHz was achieved as x varied from 0.00 to 0.20. However, Qf-value decreased rapidly when x was beyond 0.20. Some (1-x)CNT-xNZT ceramics with high s and high Qf value were obtained: g = 78.8, Qf= 19,200 GHz, tau_f = + 135 ppm/deg C for x = 0.15; epsilon = 71.8, Qf= 17,300 GHz, tau_f = + 94 ppm/deg C for x = 0.20.
机译:新型高e和高Q微波介电陶瓷(1-x)Ca_(0.61)Nd_(0.26)TiO_3-xNd(Zn_(0.5)Ti_(0.5))O_3(x = 0.00-0.40,称为(1 -x)CNT-xNZT)通过常规的固态制备路线制备。当x不超过0.15时,形成单斜方钙钛矿相。当x = 0.20时,出现了第二相Zn_2TiO_4,而当x大于0.20时,ZnO是陶瓷的第二相。谐振频率的介电常数和温度系数随着x值的增加而稳定下降。当x从0.00变为0.20时,可实现10,000 GHz以上的高Qf值。但是,当x超过0.20时,Qf值迅速下降。获得了一些具有高s和高Qf值的(1-x)CNT-xNZT陶瓷:g = 78.8,Qf = 19,200 GHz,对于x = 0.15,tau_f = + 135 ppm /℃;对于x = 0.20,ε= 71.8,Qf = 17,300 GHz,tau_f = + 94 ppm /摄氏度。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号