首页> 外文期刊>Journal of Applied Polymer Science >Tuning the gas separation performance of fluorinated and sulfonated PEEK membranes by incorporation of zeolite 4A
【24h】

Tuning the gas separation performance of fluorinated and sulfonated PEEK membranes by incorporation of zeolite 4A

机译:通过掺入沸石4A的调节氟化和磺化PEEK膜的气体分离性能

获取原文
获取原文并翻译 | 示例
           

摘要

Mixed matrix membranes (MMMs) containing fluorinated-sulfonated poly(ether ether ketone) (F-SPEEK) and zeolite 4A filler, were prepared by solution casting. F-SPEEK with a fixed degree of sulfonation (40%) was used for membrane synthesis. The SEM pictures showed good interfacial adhesion between filler particles and polymer, which was also confirmed by the increase in glass transition temperature of MMMs with increase in filler particles. Pure and mixed gas permeation experiments were carried out to investigate the potential of this membrane material. The results revealed that addition of zeolite 4A fillers enhanced both permeability and selectivity owing to the intrinsic nature of polymer and modified membrane morphology due to filler. The highest permeability obtained for CO2 at 30% filler loading was 49.2 Barrer, while highest selectivities obtained for CO2/CH4 and CO2/N-2 were 55 and 58 compared to 47 and 51 for the unfilled polymer, respectively. Intrinsic CO2 solubility of F-SPEEK was observed to be decreased from 10.7 to 1.9 (10(-2)) cm(3) (STP)/cm(3) cmHg with the addition of Zeolite 4A. (C) 2017 Wiley Periodicals, Inc.
机译:通过溶液浇铸制备含有氟化磺化聚(醚醚酮)(F-Speek)和沸石4A填料的混合基质膜(MMM)。 F-Speek具有固定度磺化(40%)用于膜合成。 SEM图片在填料颗粒和聚合物之间显示出良好的界面粘附,这也通过MMM的玻璃化转变温度的增加来证实,随着填料颗粒的增加。进行纯净和混合气体渗透实验以研究该膜材料的潜力。结果表明,由于聚合物和由于填料,由于聚合物和改性膜形态的内在性质而增强了沸石4a填料的渗透性和选择性。在30%填料负载下获得的最高渗透率为49.2个禁止,而CO 2 / CH 4和CO 2 / N-2获得的最高选择性分别为55和58,分别为未填充聚合物的47和51。观察到F-Speek的固有CO 2溶解度从10.7-1.9(10(-2))cm(3)(STP)/ cm(3)cmHg以加入沸石4a降低。 (c)2017 Wiley期刊,Inc。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号