IMPROVING THE CONTINUOUS CASTING OF CONVERTER RAIL STEEL

L.K.Fedorov; A.V.Kuklev; A.Ya.Kuzovkov

首页> 外文期刊>Steel in Translation >IMPROVING THE CONTINUOUS CASTING OF CONVERTER RAIL STEEL

【24h】

IMPROVING THE CONTINUOUS CASTING OF CONVERTER RAIL STEEL

机译：改善转炉钢的连铸

获取原文

获取原文并翻译 | 示例

掌桥外文数据库（机构版） >>

开具论文收录证明 >>

文献代查 >>

页面导航

摘要
著录项
相似文献
相关主题

摘要

On the basis of research data, optimal temperature-rate conditions for the continuous casting of rail steel to billets of cross section 300X360 mm may be chosen. The steel temperature must be 1535-1540 deg C after evacuation and before supply to the continuous-casting machine in the casting ladle and 1485-1495 deg C in the intermediate ladle. The casting rate must be 0.4-0.55 m/min depending on the liquid-steel temperature. With increase in casting rate to 0.8 m/min or more, axial porosity develops and the liquation of carbon increase. To reduce liquidation in rail billets, magnetic mixing of the steel is expedient.

机译：根据研究数据，可以选择将钢轨连铸到横截面为300X360 mm的钢坯的最佳温度速率条件。排空后和浇铸钢包中的连续浇铸机供应之前，钢温必须为1535-1540℃，中间钢包中的钢温必须为1485-1495℃。取决于钢水温度，铸造速度必须为0.4-0.55 m / min。随着铸造速率增加到0.8m / min或更高，轴向孔隙发展并且碳的液化增加。为了减少钢坯的平整化，最好进行钢的磁力混合。

著录项

来源
《Steel in Translation》 |2000年第4期|共3页
作者
L.K.Fedorov; A.V.Kuklev; A.Ya.Kuzovkov;
展开▼
作者单位

展开▼
收录信息
原文格式 PDF
正文语种 eng
中图分类炼钢;
关键词

相似文献

外文文献
中文文献
专利

1. IMPROVING THE CONTINUOUS CASTING OF CONVERTER RAIL STEEL [J] . L.K.Fedorov, A.V.Kuklev, A.Ya.Kuzovkov Steel in Translation . 2000,第4期

机译：改善转炉钢的连铸
2. MODELING THE TEMPERATURE DYNAMICS OF METAL IN A STEEL-CASTING LADLE BETWEEN THE CONVERTER AND THE CONTINUOUS-CASTING MACHINE [J] . D. V. Gulyga, A. V. Sushchenko Steel in Translation . 2004,第9期

机译：在转炉和连铸机之间的铸钢包中金属的温度动力学建模
3. PROCESS FOR VERY LOW-CARBON INTERSTITIAL FREE (IF) AND ULTRA LOW CARBON BAINITIC (ULCB) STEEL, UTILIZING COMBINED INJECTION CONVERTERS, CONTINUOUS CASTING AND ROLLING [J] . V. Munteanu, A. Grigore, I. Tofan Metalurgia . 2002,第11期

机译：极低碳无间隙（IF）和超低碳贝氏体（ULCB）钢的工艺，采用联合喷射转换器，连续铸造和轧制
4. New Developments in Dynamic Soft Reduction in Continuous Casting of Blooms for Rail and Stainless Steels [C] . Luca Cestari, Marco Mauro Motta, Loris Busolini Iron and Steel Technology Conference . 2015

机译：铁路和不锈钢连续铸造动态软化的新发展
5. Computational fluid dynamics (CFD) simulations of molten steel flow patterns and particle-wall adhesion in continuous casting of steels [D] . Mohammadi-Ghaleni, Mahdi. 2016

机译：钢材连续铸造钢流动图案的计算流体动力学（CFD）模拟和颗粒壁粘合
6. Cracking and segregation in high-alloy steel 0.4C1.5Mn2Cr0.35Mo1.5Ni produced by thick continuous casting [O] . Rensheng Chu, Zhanjun Li, Yong Fan, 2019

机译：厚连铸0.4C1.5Mn2Cr0.35Mo1.5Ni高合金钢的裂纹和偏析
7. Research and Application on Numerical Simulation of Heavy Rail Steel in Continuous Casting Process [O] . Liang CHEN 2019

机译：连续铸造工艺中重型铁路数值模拟的研究与应用
8. Criteria for the Formation of Cracks during Continuous Casting of Special Steels. Cost 504 Casting Technology Project SF 3. Final Report 1988-91. [R] . Holappa, L., Louhenkilpi, S., Miettinen, J. 1991

机译：特种钢连铸过程中裂纹形成的标准。成本504铸造技术项目sF 3.最终报告1988-91。

IMPROVING THE CONTINUOUS CASTING OF CONVERTER RAIL STEEL

摘要

著录项

相似文献

相关主题

期刊订阅