• 主题
高级搜索  >
历史搜索 清空历史
首页> 美国政府科技报告 >Analysis of Symmetric Reinforcement of Graphite/Epoxy Honeycomb Sandwich Panels with a Circular Cutout under Uniaxial Compressive Loading.
【24h】

Analysis of Symmetric Reinforcement of Graphite/Epoxy Honeycomb Sandwich Panels with a Circular Cutout under Uniaxial Compressive Loading.

机译：单轴压缩载荷下圆形切口石墨/环氧蜂窝夹芯板对称配筋分析。

获取原文
页面导航
  • 摘要
  • 著录项
  • 相似文献
  • 相关主题

摘要

An experimental and computational analysis was made of stress/strain concentrations around a reinforced circular 1.00 inch diameter circular cutout in HMF330C/34 (cloth) graphite/epoxy (G/Ep) and fiberglass/phenolic honeycomb sandwich panels under uniaxial compressive loading. The test specimens were 10.00 in. x 8.50 in., eight ply quasi-isotropic panels. The reinforcement consisted of either one or two additional G/Ep plies co-cured to the outside of each facesheet. Three general reinforcement configurations were considered: round, square and strips parallel to the applied load. The analytical results demonstrated that small amounts of reinforcement could greatly increase the strength-to-weight ratio. The indication was that concentrating the reinforcement close to the cutout yielded the greatest decrease in stress concentration. A computer program of experimental validation of the analytical results experienced some problems with premature panel failure caused by the facesheets separating from the core. It generally confirmed the analytical results, however. Further experimental tests on promising reinforcement configurations are justified based on these results. Properly designed reinforcement around cutouts in composite panels can significantly reduce the stress concentration and holds the promise of far lighter and stronger aerospace structures. (Author)

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号