• 主题
高级搜索  >
历史搜索 清空历史
首页> 美国政府科技报告 >Development of an advanced, continuous mild gasification process for the production of co-products. Task 4.8, Decontamination and disassembly of the mild gasification process research unit and disposal of co-products
【24h】

Development of an advanced, continuous mild gasification process for the production of co-products. Task 4.8, Decontamination and disassembly of the mild gasification process research unit and disposal of co-products

机译：开发用于生产副产品的先进，连续的温和气化工艺。任务4.8，对温和气化工艺研究单元进行净化和拆卸以及处理副产品

获取原文
页面导航
  • 摘要
  • 著录项
  • 相似文献
  • 相关主题

摘要

Prior to disassembly of the CFBR, accumulated tar residue must be removed from the reactor, piping and tubing lines, and the condenser vessels. Based on experience from the CFBR mild gasification tests, lacquer thinner must be pumped through the unit for at least one hour to remove the residual tar. The lacquer thinner wash may be followed by a water wash. The CFBR will be disassembled after the system has been thoroughly flushed out. The following equipment must be disassembled and removed for storage: Superheater; Water supply pump; Coal feed system (hopper, auger, ball feeder, valves); Reactor; Cyclone and fines catch pot; Condensers (water lines, glycol bath, condenser pots, valves); and Gas meter. After the process piping and reactor have been disassembled, the equipment will be inspected for tar residues and flushed again with acetone or lacquer thinner, if necessary. All solvent used for cleaning the system will be collected for recycle or proper disposal. Handling and disposal of the solvent will be properly documented. The equipment will be removed and stored for future use. Equipment contaminated externally with tar (Level 4) will be washed piece by piece with lacquer thinner after disassembly of the PRU. Proper health and safety practices must be followed by the personnel involved in the cleanup operation. Care must be taken to avoid ingestion, inhalation, or prolonged skin contact of the coal tars and lacquer thinner. Equipment contaminated internally by accumulation of residual tar or oil (Level 5) will be flushed section by section with lacquer thinner. The equipment will be washed with solvent both before and after disassembly to ensure that all tar has been removed from the piping, pumps, gas quench condensers, light tar condensers, and drain lines. The coal tars wig be separated from the solvent and incinerated.

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号