• 主题
高级搜索  >
历史搜索 清空历史
首页> 美国政府科技报告 >Single round blasting of 10-foot diameter X 65-foot depth emplacement collar holes at the Nevada Test Site.
【24h】

Single round blasting of 10-foot diameter X 65-foot depth emplacement collar holes at the Nevada Test Site.

机译：在内华达试验场进行单个圆形爆破，直径10英尺X 65英尺深的安置领孔。

获取原文
页面导航
  • 摘要
  • 著录项
  • 相似文献
  • 相关主题

摘要

Since 1961 REECo has drilled and mined emplacement holes for testing nuclear devices underground. An oversize drill pattern was the primary method used. The application of drilling the final size configuration hole to a 65-foot depth and mucking with the Auger Rig was then investigated. Numerous drilling patterns, loading and time schemes and methods were tried. Some were successful. Most were expensive. All concerned looked for a better and less costly method for this collar casing installation. Poor fragmentation in the collar holes prior to Atlas Powder becoming involved resulted in slow hole cleanout and excessive rig maintenance with associated excessive costs. One of the more successful shots was a 120-inch diameter (times) 60-foot deep hole that was drilled using 3 1/2-inch holes and then casing them to a 2-inch diameter using PVC pipe. A 30-inch burn hole was drilled to total depth. Twenty-seven 3 1/2-inch holes were drilled and then loaded with 1 1/2-inch powder boosted with Detaprimes and wired using all 0 delay caps. This shot smooth walled and the blast holes were visible all the way from top to bottom. Fragmentation was excellent and the Auger Rig mucked out quickly. The 28-inch bit used for the burn hole was a high cost item in this test and other methods continued to be investigated.

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号