【24h】

Research on WCDMA RF front-end technology

机译:WCDMA RF前端技术研究

获取原文
获取原文并翻译 | 示例

摘要

A kind of WCDMA RF front-end of mobile table is designed in this paper. The main building blocks of this RF front-end are receiving circuit, transmitting circuit, duplexer and regulator. A cascade mode with three LNAs is used in the receiving circuit, and a traditional cascade mode with driver amplifier and power amplifier is used in the transmitting circuit. The final measurement results show that this RF front-end provides maximum transmitting power of 23dBm, power conversion gain of receiving circuit of 40dB, power conversion gain of transmitting circuit of 25dB, gain flatness of less than 1dB, input and output return loss of more than 10dB, output P1dB of 32dBm, ΔIMD3 of −48dBc, and ACLR of −46.29dBc (lower sideband) and −48.56dBc (upper sideband). Therefore, this RF front-end completely meet the standards of WCDMA, which could be installed in the mobile table to use.
机译:本文设计了一种移动台的WCDMA RF前端。该射频前端的主要组成部分是接收电路,发送电路,双工器和调节器。在接收电路中使用具有三个LNA的级联模式,在发射电路中使用具有驱动器放大器和功率放大器的传统级联模式。最终的测量结果表明,该射频前端提供最大发射功率23dBm,接收电路的功率转换增益为40dB,发射电路的功率转换增益为25dB,增益平坦度小于1dB,输入输出回波损耗更大。大于10dB,输出P1dB为32dBm,ΔIMD3为-48dBc,ACLR为-46.29dBc(下边带)和-48.56dBc(上边带)。因此,该射频前端完全符合WCDMA的标准,可以安装在移动台上使用。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号