Microstructural characteristics of high velocity oxy-fuel thermally sprayed Al-12wt.Sn-1wt.Cu alloys

机译：高速含氧燃料热喷涂Al-12wt。％Sn-1wt。％Cu合金的组织结构

获取原文

获取原文并翻译 | 示例

页面导航

摘要
著录项
相似文献
相关主题

摘要

High velocity oxy-fuel thermal sprayed Al-12wt.%Sn-lwt.%Cu alloy coatings have been characterised both in the as-sprayed condition and following heat treatment in air at 300℃ for periods up to 5 hours. The as-sprayed microstructure comprises principally nanoscale Sn-rich particles embedded in an Al-rich matrix. The Sn-particles coarsen and the alloy microhardness decreases with increasing time of heat treatment.

机译：在喷涂状态下和在空气中于300℃下热处理长达5小时后，均已表征了高速氧燃料热喷涂Al-12wt。％Sn-1wt。％Cu合金涂层的特性。喷涂后的微观结构主要包括嵌入富铝基体中的纳米级富锡颗粒。随着热处理时间的增加，Sn颗粒变粗，合金的显微硬度降低。

著录项

来源
《Institute of Physics Electron Microscopy and Analysis Group Conference, Sep 5-7, 2001, Dundee》|2001年|p.227-230|共4页
会议地点 Dundee(GB);Dundee(GB)
作者
Chang-Jing Kong; Paul D. Brown; Andrew J. Horlock; Sam J. Harris; D. Graham McCartney;
展开▼
作者单位

School of Mechanical, Materials, Manufacturing Engineering Management, University of Nottingham, University Park, Nottingham NG7 2RD;

展开▼
会议组织
原文格式 PDF
正文语种 eng
中图分类无线电电子学、电信技术;
关键词

相似文献

外文文献
中文文献
专利

1. Microstructural characterisation of a Ni-Cr-B-C based alloy coating produced by high velocity oxy-fuel thermal spraying [J] . Dent AH., McCartney DG., Harris SJ., Surface & Coatings Technology . 2001,第2a3期

机译：高速氧-燃料热喷涂制备的Ni-Cr-B-C基合金涂层的显微组织表征
2. The Effect of Deposition Rate on Microstructural Evolution in WC-Co-Cr Coatings Deposited by High-Velocity Oxy-Fuel Thermal Spray Process [J] . Farokhzadeh K., Fillion R. M., Edrisy A. Journal of Materials Engineering and Performance . 2019,第12期

机译：高速氧燃料热喷涂工艺沉积WC-CO-CR涂层微结构演化的沉积速率
3. High-velocity oxy-fuel thermally sprayed CoNiCrAlY coatings on Ti-6Al-4V alloy: high cycle fatigue properties of coating [J] . D. Al-Anazi, M. S. J. Hashmi, B. S. Yilbas Proceedings of the Institution of Mechanical Engineers, Part B. Journal of engineering manufacture . 2007,第b4期

机译：Ti-6Al-4V合金上的高速含氧燃料热喷涂CoNiCrAlY涂层：涂层的高循环疲劳性能
4. Microstructural characteristics of high velocity oxy-fuel thermally sprayed Al-12wt.Sn-1wt.Cu alloys [C] . Chang-Jing Kong, Paul D. Brown, Andrew J. Horlock, Institute of Physics Electron Microscopy and Analysis Group conference . 2001

机译：高速氧燃料热喷涂Al-12wt的微观结构特征。％Sn-1wt。％Cu合金
5. Design and development of a High Velocity Oxy-Fuel thermal spray gun. [D] . Cabrera Maynez, Luisa Alejandra. 2014

机译：高速氧气燃料热喷枪的设计和开发。
6. A Study on the Microstructural Characterization and Phase Compositions of Thermally Sprayed Al2O3-TiO2 Coatings Obtained from Powders and Water-Based Suspensions [O] . Monika Michalak, Filofteia-Laura Toma, Leszek Latka, 2020

机译：粉末和水悬浮液获得的热喷涂Al2O3-TiO2涂层的微观结构表征和相组成的研究
7. Microstructural characterisation of a high velocity oxy-fuel thermally sprayed Al-12wt.Sn-1wt.Cu alloy [O] . Kong Chang-Jing, Brown Paul D., Horlock Andrew J., 2001

机译：高速含氧燃料热喷涂Al-12wt。％Sn-1wt。％Cu合金的组织结构表征
8. Accelerated Mission Test Evaluation of TF33 Engine Components Coated with High Velocity Oxy-Fuel (HVOF) Thermal Spray Coatings in Lieu of Hard Chrome. [R] . Shubert, G. C., Freling, M. 2003

机译：加速任务测试评估TF33发动机部件与高速氧燃料（HVOF）热喷涂涂层硬铬。

Microstructural characteristics of high velocity oxy-fuel thermally sprayed Al-12wt.Sn-1wt.Cu alloys

摘要

著录项

相似文献

相关主题

期刊订阅