Development of a Quasi Hydrodynamic Polishing Process on a Machining Center

机译：在加工中心上进行准水动力抛光工艺的开发

获取原文

获取原文并翻译 | 示例

页面导航

摘要
著录项
相似文献
相关主题

摘要

The objective of this research is to develop a quasi hydrodynamic polishing process using a ball polishing tool,to improve the surface roughness of the hardened and tempered STAVAX plastic mould stainless steel on a CNC machining center.A set of computational fluid dynamics (CFD) software was used to analyse and simulate the shear stress and velocity of the fluid between the fluid and the workpiece for hydrodynamic polishing in this research.The optimal process parameters for hydrodynamic polishing have been determined by the Taguchi's experimental method.Using the determined optimal quasi hydrodynamic polishing parameters,the surface roughness of the burnished test specimens could be improved from 0.02 μm (Ra) on average to 0.008 μm (Ra) on average.

机译：这项研究的目的是开发一种使用球抛光工具的准流体动力抛光工艺，以改善CNC加工中心上经淬火和回火的STAVAX塑料模具不锈钢的表面粗糙度。一套计算流体动力学（CFD）软件本研究利用流体动力学分析和模拟流体与工件之间的剪切应力和流体速度进行水力抛光。通过田口实验方法确定了水力抛光的最佳工艺参数。抛光的试样的表面粗糙度可以从平均0.02μm（Ra）提高到平均0.008μm（Ra）。

著录项

来源
《International conference on mechatronics technology》|2012年|270-274|共5页
会议地点 Tianjin(CN)
作者
Fang-Jung Shiou; Mao-Min Fu; Sun-Peng Lin;
展开▼
作者单位

Department of Mechanical Engineering, National Taiwan University of Science and Technology;

Department of Mechanical Engineering, National Taiwan University of Science and Technology;

Department of Mechanical Engineering, National Taiwan University of Science and Technology;

展开▼
会议组织
原文格式 PDF
正文语种 eng
中图分类 TH15;
关键词
hydrodynamic polishing; Taguchi's experimental method; surface roughness improvement;

机译：水力抛光田口实验方法表面粗糙度改善;

相似文献

外文文献
中文文献
专利

1. An experimental study on machining rate distribution of hydrodynamic polishing process [J] . Yaw-Terng Su, Yui-Chen Kao Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear . 1999,第1期

机译：流体动力抛光工艺加工速率分布的实验研究
2. Experimental study on machining rate distribution of hydrodynamic polishing process [J] . Su Yaw-Terng, Kao Yui-Chen Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear . 1999,第1期

机译：流体动力抛光工艺加工速率分布的实验研究
3. On machining rate of hydrodynamic polishing process under semi-contact lubricating condition [J] . Yaw-Terng Su, Tu-Chieh Hung, Yeong-Yi Chang Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear . 1998,第1期

机译：半接触润滑条件下水力抛光工艺的机加工速率
4. Development of a Quasi Hydrodynamic Polishing Process on a Machining Center [C] . Fang-Jung Shiou, Mao-Min Fu, Sun-Peng Lin International conference on mechatronics technology . 2012

机译：加工中心拟水动力抛光工艺的开发
5. An optimization approach to the integration of computer-aided fixture design with macro process planning for three-dimensional prismatic workpieces manufactured on CNC machining centers. [D] . Prombanpong, Suksan. 1990

机译：将计算机辅助夹具设计与宏观加工计划相集成的优化方法，用于在CNC加工中心上制造的三维棱柱形工件。
6. Novel Disc Hydrodynamic Polishing Process and Tool for High-Efficiency Polishing of Ultra-Smooth Surfaces [O] . Bin Lin, Xiang-Min Jiang, Zhong-Chen Cao, 2018

机译：高效抛光超光滑表面的新型圆盘流体动力抛光工艺和工具
7. Novel Disc Hydrodynamic Polishing Process and Tool for High-Efficiency Polishing of Ultra-Smooth Surfaces [O] . Bin Lin, Xiang-Min Jiang, Zhong-Chen Cao, 2018

机译：用于超光滑表面的高效抛光的新型圆盘水动力抛光工艺和工具
8. Soviet Developments in Information Processing and Machine Translation. Problems of Word-Order in Russian-Chinese Machine Translation and Their Solutions. [R] . Yung-chuan, L. 1960

机译：苏联信息处理与机器翻译的发展。俄汉机器翻译中的词序问题及其解决方法。

Development of a Quasi Hydrodynamic Polishing Process on a Machining Center

摘要

著录项

相似文献

相关主题

期刊订阅