首页> 外文会议>World Congress of the International Measurement Confederation >Flow measurement of oil-in-water flows in vertical low flow rate and high water-cut flow conditions
【24h】

Flow measurement of oil-in-water flows in vertical low flow rate and high water-cut flow conditions

机译:垂直低流速下油流动流量的流量测量和高污水流动条件

获取原文

摘要

This paper reports on the flow measurement of oil-in-water flows with low flow rare and high water-cut in vertical 20mm inner diameter pipe. By using arc type conductivity sensor (ATCS) and cross-correlation flow meter (CCFM) based on conductance method, water holdup and mixture velocity are obtained. Afterward, oil-in-water flows drift-flux model is established to predict individual phase superficial velocity. The research results show that ATCS has high resolution on water holdup and CCFM performs well in mixture velocity measurement. Based on drift-flux model, individual phase superficial velocity can be predicted with high accuracy.
机译:本文报道了水流水流流量的流量测量,垂直20mm内径管中的低流量稀有和高水切口。通过使用基于电导法的电弧型电导率传感器(ATC)和互相关流量计(CCFM),获得水储存和混合速度。之后,建立水油流动流量模型,以预测单个浅表速度。研究结果表明,ATC在水储存上具有高分辨率,CCFM在混合速度测量中表现良好。基于漂移通量模型,可以高精度地预测各个相位表速度。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号