首页> 外文会议>SAE Commercial Vehicle Engineering Congress >Characterization of Palm Fiber for Development of Biocomposites Material for Automotive Industries
【24h】

Characterization of Palm Fiber for Development of Biocomposites Material for Automotive Industries

机译:棕榈纤维对汽车产业生物复合材料材料的特征

获取原文

摘要

The physical and optical properties viz., water absorption pattern, density, color and opacity of oil palm fiber-LLDPE composites were studied. The effect of fiber size, fiber loading and fiber treatment on the above parameters was also studied. Alkali treatment on fibers was done to reduce the hydrophilic nature of composites. It was found that the water absorption in most of the combinations followed typical fickian behavior. The rate of water absorption and swelling increased with fiber loading. However alkali treatment on fibers resulted in reduction of water absorption at higher fiber loading only and composites with higher fiber size exhibited higher water absorption. True density of oil palm fiber-LLDPE composites were in the range of 967-1177 kg m~(-3), whereas the bulk density ranged from 942-1122 kg m~(-3). The dielectric constant of the composite was in the range of 3.22 to 6.73. The L~*, a~* and b~* values of oil palm fiber-LLDPE composites were respectively in the range of 42.25-59.69, 5.85-6.30, 15.65- 22.06. Opacity of LLDPE specimen of 3 mm thickness was 63.58%. Predicted values of true density of composites were in good agreement with measured values.
机译:研究了物理和光学特性。研究了油棕纤维 - LLDPE复合材料的吸水图,密度,颜色和不透明度。还研究了纤维尺寸,纤维加载和纤维处理对上述参数的影响。对纤维进行碱处理以减少复合材料的亲水性质。发现大多数组合中的吸水率跟随典型的非公司行为。用纤维载荷增加吸水率和肿胀。然而,对纤维的碱处理导致在较高纤维载荷下减少吸水性,并且具有较高纤维尺寸的复合材料表现出更高的吸水性。油棕纤维 - LLDPE复合材料的真实密度为967-1177 kg m〜(-3),而散装密度范围为942-1122 kg m〜(-3)。复合材料的介电常数在3.22至6.73的范围内。油棕纤维 - LLDPE复合材料的L〜*,A〜*和B〜*值分别为42.25-59.69,5.85-6.30,15.65-22.06。 LLDPE标本的不透明度为3毫米厚度为63.58%。预测复合材料的真实密度值与测量值很好。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号