The Tribological Properties and the Microstructure of Cu-Mo-S Coatings

机译：Cu-MO-S涂层的摩擦学性质和微观结构

获取原文

页面导航

摘要
著录项
相似文献
相关主题

摘要

Coatings on the basis of the Cu-Mo-S system were deposited on the Cu substrate by the method of pulse magnetron sputtering of a special composite target. The wear resistance of the coatings with a copper friction pair was studied using the tribological tests in argon and the air environment. The coating properties were investigated using a variety of methods including SEM, TEM/EDS, and XRD. The fiber-globular structure of the coatings was evaluated. The investigation showed that the Cu-Mo-S coatings could decrease the wear rate of a copper friction pair in -350 times in the argon atmosphere. A decrease of the friction coefficient of the copper friction pair from 0.59 to 0.27 (with a coating) was observed during the tribological tests in the air environment.

机译：通过特殊复合靶的脉冲磁控溅射的方法在Cu-MO-S系统的基础上沉积在Cu-Mo-S系统的基础上。使用氩气和空气环境中的摩擦学检测研究了用铜摩擦对的涂层的耐磨性。使用多种方法研究包括SEM，TEM / EDS和XRD的各种方法研究。评价涂层的纤维 - 球状结构。该研究表明，Cu-Mo-S涂层可以降低氩气氛中的-350倍的铜摩擦对的磨损率。在空气环境中的摩擦学试验期间观察到铜摩擦对从0.59至0.27（用涂层）的摩擦系数的降低。

著录项

来源
《Internation Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures》|2015年||共4页
会议地点
作者
Victor P. Sergeev; Stanislav Yu. Zharkov; Mark P. Kalashnikov; Alfred R. Sungatulin;
展开▼
作者单位

展开▼
会议组织
原文格式 PDF
正文语种
中图分类 TB3-532;
关键词
SEM; TEM; XRD;

机译：没有;没有;xrd;

相似文献

外文文献
中文文献
专利

1. Effect of Si addition on the microstructure, mechanical properties and tribological properties of Zr-Si-N nanocomposite coatings deposited by a hybrid coating system [J] . Choi Hasong, Jang Jaeho, Zhang Tengfei, Surface & Coatings Technology . 2014,第Pta3期

机译：添加Si对混合涂层系统沉积Zr-Si-N纳米复合涂层微观结构，力学性能和摩擦学性能的影响
2. Effects of TiB2 Particles Content on Microstructure, Mechanical Properties and Tribological Properties of Ni-Based Composite Coatings Reinforced with TiB2 Particles by Laser Cladding [J] . Binghui Tang, Yefa Tan, Ting Xu, Coatings . 2020,第9期

机译：用激光熔覆用TIB2颗粒加固Ni基复合涂层微观结构，力学性能和摩擦学性能的影响
3. Microstructures, mechanical properties, and tribological behaviors of Cr–Al–N, Cr–Si–N, and Cr–Al–Si–N coatings by a hybrid coating system [J] . In-Wook Park, Dong Shik Kang, John J. Moore, Surface & Coatings Technology . 2007,第9a11期

机译：混合涂层系统对Cr–Al–N，Cr–Si–N和Cr–Al–Si–N涂层的组织，力学性能和摩擦学行为
4. The Tribological Properties and the Microstructure of Cu-Mo-S Coatings [C] . Victor P. Sergeev, Stanislav Yu. Zharkov, Mark P. Kalashnikov, Internation Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures . 2015

机译：Cu-MO-S涂层的摩擦学性质和微观结构
5. Development and Evaluation of NiW Alloy and NiW-TiO2 Composite Coatings on the Mechanical Properties, Tribological Performance and the Corrosion Resistance of Bearing Steel [D] . Paul, Arindam. 2021

机译：NiW合金和NiW-TiO2复合涂层对轴承钢机械性能，摩擦学性能和耐腐蚀性的开发和评价
6. Reactive Fabrication and Effect of NbC on Microstructure and Tribological Properties of CrS Co-Based Self-Lubricating Coatings by Laser Cladding [O] . Liuyang Fang, Hua Yan, Yansong Yao, 2018

机译：NbC的激光熔覆反应制备及其对CrS钴基自润滑涂层组织和摩擦学性能的影响
7. Influences of Nitrogen Flow Rate on Microstructure, Mechanical and Tribological Properties of WCN Coatings Deposited by HiPIMS [O] . Weifeng He, Yuhui Yang, Shuqi Huang, 2021

机译：氮流速对Hipims沉积的WCN涂层微观结构，机械和摩擦学性能的影响
8. Statistical Study of the Combined Effects of Substrate Temperature, Bias, Annealing, and a Cr sub 3 Si sub 2 Undercoating on the Tribological Properties of RF-Sputtered MoS sub 2 Coatings [R] . Panitz, J. K. G. , Pope, L. E. , Hills, C. R. , 1987

机译：基板温度，偏压，退火和Cr sub 3 si sub 2底涂层对射频溅射mos sub 2涂层摩擦学性能的综合影响的统计研究

The Tribological Properties and the Microstructure of Cu-Mo-S Coatings

摘要

著录项

相似文献

相关主题

期刊订阅