首页> 外文会议>MEMS/MOEMS Components and Their Applications III >A Novel Elevating Structure Design Applied on the Motion Behavior Analysis of Micro Optical Devices by CMOS-MEMS Process
【24h】

A Novel Elevating Structure Design Applied on the Motion Behavior Analysis of Micro Optical Devices by CMOS-MEMS Process

机译:新型高架结构设计在CMOS-MEMS工艺对微光学器件运动行为分析中的应用

获取原文
获取原文并翻译 | 示例

摘要

The paper proposed a novel curb structure to elevate the micro optical devices by the driving force of micro array thermal actuator, MATA. The effects of spring structure and curb structure on the maximum displacements and the variation of surface flatness of the elevated micro mirror varied with operation voltage are investigated. The motion behaviors of the elevated micro mirror are stimulated and analyzed to get the maximum displacement and inclined angle of the device. The results demonstrate the wider width, longer pitch and more pitch numbers of spring structure are; the maximum displacement of the elevated micro mirror is larger. Compared the effects of spring structure and curb structure on the maximum displacement of the elevated micro mirror, there are more influence on the variation of maximum displacement due to the varied spring structure than the varied curb structure. On the other hand, the variation of surface flatness of the elevated micro mirror is more significant by the varied pitch number of spring structure and the varied width of curb structure. The maximum displacement and inclined angle of proposed micro optical device are 58.6μm and 17.04℃, respectively.
机译:提出了一种新型的路缘结构,通过微阵列热致动器MATA的驱动力来提升微光学器件。研究了弹簧结构和路缘结构对高位移微镜的最大位移和表面平整度随工作电压变化的影响。激发并分析高架微镜的运动行为,以获取设备的最大位移和倾斜角。结果表明,弹簧结构的宽度更大,节距更长,节距数量更多。高架微镜的最大位移较大。比较了弹簧结构和路缘结构对高架微镜最大位移的影响,与变化的路缘结构相比,弹簧结构的变化对最大位移变化的影响更大。另一方面,通过改变弹簧结构的节距数和改变路缘结构的宽度,高架微镜的表面平坦度的变化更加显着。所提出的微光学器件的最大位移和倾斜角分别为58.6μm和17.04℃。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号