首页> 中文期刊> 《应用化工》 >山东某含金硫铁矿烧渣硫酸浸铁-非氰浸金工艺研究

山东某含金硫铁矿烧渣硫酸浸铁-非氰浸金工艺研究

         

摘要

为了回收山东某硫铁矿烧渣中金和铁,采用"硫酸浸铁-浸渣碱洗-新型非氰药剂KBF-1提金"的工艺流程.考察温度、矿浆浓度、硫酸浓度和浸出时间对铁浸出的影响,以及金浸出率对溶液pH值和KBF-1用量等的响应.结果表明,当浸出体系温度为70 ℃,矿浆浓度为15%,硫酸浓度为25%,浸出时间3 h时,烧渣中铁浸出率为60.34%;Fe3O4较Fe2O3易溶解;浸渣浸金的最佳工艺条件为溶液pH值为10,KBF-1用量为3.0 kg/t,金浸出率达到89.45%.%A pyrite cinder from Shandong province consists of a major of hematite (Fe2O3) and magnetite (Fe3O4),and small amounts of pyrite (FeS2) and quartz (SiO2),and so on.Gold and iron content in the pyrite cinder are 1.28 g/t and 52.30%,respectively.The process flow,sulfuric acid leaching of iron-alkaline wash of residues-gold leached by KBF-1 (a non-cyanide reagent),was designed for recovering gold and iron in pyrite cinder.The effect of temperature,pulp density,sulfuric acid concentration and extraction time on iron leaching,and the gold extraction rate responsed to the pH value and the dosage of KBF-1 were investigated.The results show that iron extraction rate from a pyrite cinder was 60.34% at temperature of 70 ℃,pulp density of 15%,sulfuric acid concentration of 25% and extraction time of 3 h.Fe3O4 has more high dissolubility than Fe2O3.When the pH value of solution is 10,the dosage of KBF-1 is 3.0 kg/t,the gold leaching efficiency from pyrite cinder is 89.45%.

著录项

  • 来源
    《应用化工》 |2017年第6期|1132-1135|共4页
  • 作者单位

    固体废物处理与资源化教育部重点实验室,四川 绵阳 621010;

    西南科技大学 环境与资源学院,四川 绵阳 621010;

    固体废物处理与资源化教育部重点实验室,四川 绵阳 621010;

    西南科技大学 环境与资源学院,四川 绵阳 621010;

    固体废物处理与资源化教育部重点实验室,四川 绵阳 621010;

    西南科技大学 环境与资源学院,四川 绵阳 621010;

    固体废物处理与资源化教育部重点实验室,四川 绵阳 621010;

    西南科技大学 环境与资源学院,四川 绵阳 621010;

    固体废物处理与资源化教育部重点实验室,四川 绵阳 621010;

    西南科技大学 环境与资源学院,四川 绵阳 621010;

  • 原文格式 PDF
  • 正文语种 chi
  • 中图分类 冶金工业;
  • 关键词

    硫铁矿烧渣; 酸浸; 非氰药剂; 金; 铁;

相似文献

  • 中文文献
  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号