Relatively large distortion of carburized large-sized gear ring will occur during the quenching.For the large-sized gear ring carburized and hardened the out-of roundness may be controlled within 2 mm,and the warping amount and the taper distortion amount may be controlled within 1 mm by the reasonable design and coordination of machining process with heat treatment process,and the adoption of proper leveling method and quenching in a nitrate bath,with bearing capacity and service life of the gear ring being elevated.%大型齿圈渗碳后淬火时会发生较大的畸变。通过合理的设计和机加工与热处理工艺的配合,采用正确的矫正方法及硝盐淬火,可以将渗碳、淬火的大型齿圈的椭圆畸变量控制在2 mm以内,翘曲量及锥度畸变量控制在1 mm以内,且提高了齿圈的承载能力和使用寿命。
展开▼