...
首页> 外文期刊>Propellants, Explosives, Pyrotechnics >Preparation and Properties of An Insensitive Booster Explosive Based on LLM-105
【24h】

Preparation and Properties of An Insensitive Booster Explosive Based on LLM-105

机译:基于LLM-105的钝感助爆药的制备与性能

获取原文
获取原文并翻译 | 示例
           

摘要

A new insensitive booster explosive based on 2,6-diamino-3,5-dinitropyrazing-1-oxide (LLM-105) was prepared by a solvent-slurry process with ethylene propylene diene monomer (EPDM) as binder. SEM (scanning electron microscopy) was employed to characterize the morphology and particle size of LLM-105 and molding powder. The mechanical sensitivity, thermal sensitivity, shock wave sensitivity, and detonation velocity of the LLM-105/EPDM booster were also measured and analyzed. The results show that both mechanical sensitivity and thermal sensitivity of LLM-105/EPDM are much lower than that of conventional boosters, such as PBXN-5 and A5. Its shock wave sensitivity is also lower than that of PBXN-5 and PBXN-7. When the density of charge is 95% TMD, its theoretical and measured detonation velocities are 7858 m s~(-1) and 7640 m s~(-1) respectively. These combined properties suggested that LLM-105/ EPDM can be used as an insensitive booster.
机译:以乙丙二烯单体(EPDM)为溶剂,通过溶剂浆法制备了一种新型的基于2,6-二氨基-3,5-二硝基吡嗪-1-氧化物的不敏感增强炸药。 SEM(扫描电子显微镜)被用来表征LLM-105和模塑粉末的形态和粒度。还测量并分析了LLM-105 / EPDM助推器的机械灵敏度,热灵敏度,冲击波灵敏度和爆震速度。结果表明,LLM-105 / EPDM的机械灵敏度和热灵敏度均远低于传统增压器(如PBXN-5和A5)。它的冲击波灵敏度也低于PBXN-5和PBXN-7。当装药密度为95%TMD时,其理论爆轰速度和实测爆轰速度分别为7858 m s〜(-1)和7640 m s〜(-1)。这些综合性能表明,LLM-105 / EPDM可用作不敏感的助推器。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号