...
首页> 外文期刊>Tribology International >Dry sliding wear characteristics of some industrial polymers against steel counterface
【24h】

Dry sliding wear characteristics of some industrial polymers against steel counterface

机译:一些工业聚合物对钢端面的干滑磨损特性

获取原文
获取原文并翻译 | 示例
           

摘要

In this investigation, the influence of test speed and applied pressure values on the friction and wear behaviour of polyamide 66 (PA 66), polyoxymethylene (POM), ultrahigh molecular weight polyethylene (UHMWPE), 30% glass fibre reinforced poly-phenylene-sulfide (PPS + 30%GFR) and aliphatic polyketone (APK) polymers were studied. Friction and wear tests of PA 66, POM, UHMWPE, PPS + 30%GFR and APK versus AISI D2 steel were carried out at dry condition on a pin-on-disc arrangement. Tribological tests were performed at room temperature at different pressures (0.35-1.05 MPa) and sliding speeds (0.5-2.0 m/s). The results showed that, for all polymers used in this investigation, the coefficient of friction decreases linearly with the increase in pressure. The specific wear rate for UHMWPE, PPS + 30%GFR and APK were in the order of 10{sup}(-5) mm{sup}3/N m, while the wear rate value for PA 66 was in the order of 10{sup}(-6) mm{sup}3/N m. In addition to this, the wear rate value for POM was in the order of 10{sup}(-3) mm{sup}3/N m. Furthermore, as the results of this investigation, the wear rate showed very little sensitivity to the applied pressures and test speed.
机译:在这项研究中,测试速度和施加压力值对聚酰胺66(PA 66),聚甲醛(POM),超高分子量聚乙烯(UHMWPE),30%玻璃纤维增​​强的聚苯硫醚的摩擦磨损性能的影响(PPS + 30%GFR)和脂族聚酮(APK)聚合物进行了研究。 PA 66,POM,UHMWPE,PPS + 30%GFR和APK对AISI D2钢的摩擦磨损试验是在干燥条件下以针盘式布置进行的。在室温下以不同的压力(0.35-1.05 MPa)和滑动速度(0.5-2.0 m / s)进行了摩擦学测试。结果表明,对于本研究中使用的所有聚合物,摩擦系数均随压力的增加而线性减小。 UHMWPE,PPS + 30%GFR和APK的比磨损率约为10 {sup}(-5)mm {sup} 3 / N m,而PA 66的磨损率值约为10 {sup}(-6)mm {sup} 3 / N m。除此之外,POM的磨损率值约为10 {sup}(-3)mm {sup} 3 / N m。此外,作为这项研究的结果,磨损率对施加的压力和测试速度几乎没有敏感性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号