首页> 外文期刊>Acta biomaterialia >Hydroxyapatite/titania sol-gel coatings on titanium-zirconium alloy for biomedical applications.
【24h】

Hydroxyapatite/titania sol-gel coatings on titanium-zirconium alloy for biomedical applications.

机译:用于生物医学应用的钛锆合金上的羟基磷灰石/二氧化钛溶胶-凝胶涂层。

获取原文
获取原文并翻译 | 示例
           

摘要

A simple sol-gel method was developed for hydroxyapatite/titania (HA/TiO(2)) coatings on non-toxic titanium-zirconium (TiZr) alloy for biomedical applications. The HA/TiO(2)-coated TiZr alloy displayed excellent bioactivity when soaked in a simulated body fluid (SBF) for an appropriate period. Differential scanning calorimetry, thermogravimetric analysis, X-ray diffraction and scanning electron microscopy-energy dispersive spectrometry were used to characterize the phase transformations and the surface structures and to assess the in vitro tests. The HA/TiO(2) layers were spin-coated on the surface of TiZr alloy at a speed of 3000rpm for 15s, followed by a heat treatment at 600 degrees C for 20min in an argon atmosphere sequentially. The TiO(2) layer exhibited a cracked surface and an anatase structure and the HA layer displayed a uniform dense structure. Both the TiO(2) and HA layers were 25microm thick, and the total thickness of the HA/TiO(2) coatings was 50microm. The TiZr alloy after the above HA/TiO(2) coatings displayed excellent bone-like apatite-forming ability when soaked in SBF and can be anticipated to be a promising load-bearing implant material.
机译:一种简单的溶胶-凝胶方法被开发用于生物医学应用的无毒钛-锆(TiZr)合金上的羟基磷灰石/二氧化钛(HA / TiO(2))涂层。当将HA / TiO(2)涂层的TiZr合金浸泡在模拟体液(SBF)中适当的时间后,其表现出出色的生物活性。差示扫描量热法,热重分析,X射线衍射和扫描电子显微镜-能量色散光谱法用于表征相变和表面结构并评估体外测试。将HA / TiO(2)层以3000rpm的速度旋涂在TiZr合金的表面上15秒钟,然后依次在氩气气氛中在600摄氏度下热处理20分钟。 TiO(2)层显示出裂纹的表面和锐钛矿结构,而HA层显示出均匀的致密结构。 TiO(2)和HA层都为25微米厚,HA / TiO(2)涂层的总厚度为50微米。上面的HA / TiO(2)涂层后的TiZr合金在SBF中浸泡后显示出优异的骨状磷灰石形成能力,可以预期是一种有前途的承重植入材料。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号