首页> 外文期刊>Journal of Corrosion Science and Engineering >(v16preprint36)Inhibitive action of potassium iodide on the corrosion of stir-cast Al-Si/SiC in NaCl-KI interface
【24h】

(v16preprint36)Inhibitive action of potassium iodide on the corrosion of stir-cast Al-Si/SiC in NaCl-KI interface

机译:(v16preprint36)碘化钾对NaCl-ki界面搅拌铸造Al-Si / SiC腐蚀的抑制作用

获取原文
获取原文并翻译 | 示例
           

摘要

The inhibitive action of potassium iodide (KI) on the corrosion of Al-Si/SiCparticulate composite in 3.65% NaCl solution was investigated using gravimetric andpotentiodynamic polarization techniques at 298K. The results showed that KI in NaClaluminiumalloy/SiC composite environment decreased the corrosion rate at allconcentrations considered. Inhibitor efficiencies (IE) of 97.17, 97.34 and 97.57% with 0.5 g/vaddition using gravimetric method were achieved at 92, 196 and 288 h of exposure timerespectively. The IE from the potentiodynamic polarization method in both conditions wassignificantly enhanced. The high resolution scanning electron microscope (HRSEM) forsurface morphology of as-corroded uninhibited condition showed pits and cracks formationthan as-corroded inhibited condition. The additions of KI as corrosion inhibitor indicates ahigher potential value, IE and polarization resistance with decreased in current density. Thetwo methods employed for the corrosion assessment of the composite was in agreement andmixed-type corrosion exists which followed Langmuir adsorption isotherms.
机译:在298K时研究了在3.65%NaCl溶液中,研究了碘化钾(Ki)对3.65%NaCl溶液中Al-Si / SiCparticulate复合材料腐蚀的抑制作用。结果表明,NaClalumaliumalloy / SiC复合环境中的Ki降低了所考虑的杂交的腐蚀速率。在92,196和288小时的曝光中,实现了97.17,97.34和97.57.34和97.57%的97.17,97.34和97.57%的抑制剂效率。两种条件中的电位动力学偏振方法的IE术语。高分辨率扫描电子显微镜(HRSEM)腐蚀不抑制病症的面积形态显示凹坑和裂缝形成抑制条件。作为腐蚀抑制剂的基于Ki的添加表示高度的电位值,即,电流密度降低和极化电阻。用于腐蚀评估综合评估的Thetwo方法是一致的,存在型腐蚀,其随后是琅勃勃吸附等温线。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号