...
  • 主题
高级搜索  >
历史搜索 清空历史
首页> 外文期刊>Journal of industrial and engineering chemistry >Improved performance of flexible polymer light emitting diodes with an indium-zinc-tin-oxide transparent anode by controlling the thermal treatment temperature
【24h】

Improved performance of flexible polymer light emitting diodes with an indium-zinc-tin-oxide transparent anode by controlling the thermal treatment temperature

机译：通过控制热处理温度，通过控制铟 - 锌 - 锡氧化锡透明阳极来提高柔性聚合物发光二极管的性能

获取原文
获取原文并翻译 | 示例
           
页面导航
  • 摘要
  • 著录项
  • 相似文献
  • 相关主题

摘要

The indium-zinc-tin-oxide (IZTO) target, which consisted of 70 at.% In2O3- 15 at.% ZnO- 15 at.% SnO2, was manufactured to replace indium-tin-oxide (ITO). The flexible IZTO (FIZTO) transparent electrodes were deposited on polyimide (PI) films at temperatures ranging from room temperature to 300 degrees C. The mechanical, optical and electrical properties of the FIZTO films and the flexible polymer light emitting diodes (FPLEDs) were characterized. Amorphous FIZTO prepared at 50 degrees C showed the best performance. The optimized FPLEDs exhibited 31% and 9% enhanced maximum brightness and luminance efficiency, respectively, as compared to PLEDs with an ITO glass. In addition, the FPLEDs worked normally in the stretching and twisting state at 3.2% and 58 degrees, respectively. (C) 2017 Published by Elsevier B.V. on behalf of The Korean Society of Industrial and Engineering Chemistry.
机译：氧化锌 - 氧化锡（IZTO）靶标，其组成为70.％In2O3-15.％ZnO-15。％SnO 2，被制造以取代氧化铟锡（ITO）。 柔性IZTO（FIZTO）透明电极沉积在从室温至300℃的温度范围内的聚酰亚胺（PI）膜上。特征在于FizTo膜的机械，光学和电性能和柔性聚合物发光二极管（灌注） 。 在50℃下准备的非晶纤维表现出了最佳性能。 与ITO玻璃相比，优化的造型分别表现出31％和9％增强的最大亮度和亮度效率。 另外，灌注物通常分别以3.2％和58度的拉伸和扭曲状态工作。 （c）2017年由elsevier b.v出版。代表朝鲜工程和工程化学学会。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号