首页> 外文期刊>Electroanalysis >Electrogenerated chemiluminese ethanol biosensor based on carbon nanotube-titania-nafion composite film
【24h】

Electrogenerated chemiluminese ethanol biosensor based on carbon nanotube-titania-nafion composite film

机译:基于碳纳米管-二氧化钛-纳米复合膜的电生化学发光乙醇生物传感器

获取原文
获取原文并翻译 | 示例
           

摘要

Mesoporous titania-Nafion composite doped with carbon nanotube (CNT) has been used for the immobilization of tris(2,2'-bipyridyl)ruthenium(II) (Ru(bpy)(3)(2+)) and alcohol dehydrogenase on an electrode surface to yield a highly sensitive and stable electrogenerated chemiluminescence (ECL) ethanol biosensor. The presence of CNT in the composite film increases not only the sensitivity of the ECL biosensor but also the long-term stability of the biosensor. The present biosensor responds linearly to ethanol in the wide concentration ranges from 1.0 x 10(-5) M to 1.0 x 10(-1) M with a detection limit of 5.0 x 10(-6) M (S/N= 3). The present ECL ethanol biosensor exhibited higher ECL response compared to that obtained with the ECL biosensor based on the corresponding composite without CNT. The present CNT-based ECL biosensor showed good long-term stability with 75% of its initial activity retained after 2 weeks of storage in 50 mM phosphate buffer at pH 7.0.
机译:掺杂有碳纳米管(CNT)的介孔二氧化钛-Nafion复合材料已用于固定三(2,2'-联吡啶基)钌(II)(Ru(bpy)(3)(2+))和乙醇脱氢酶电极表面产生高度灵敏且稳定的电化学发光(ECL)乙醇生物传感器。复合膜中CNT的存在不仅增加了ECL生物传感器的灵敏度,而且还提高了生物传感器的长期稳定性。本生物传感器在1.0 x 10(-5)M至1.0 x 10(-1)M的宽浓度范围内对乙醇线性响应,检测极限为5.0 x 10(-6)M(S / N = 3) 。与使用基于不含CNT的相应复合物的ECL生物传感器所获得的相比,本ECL乙醇生物传感器表现出更高的ECL响应。当前的基于CNT的ECL生物传感器显示出良好的长期稳定性,其初始活性的75%在50 mM磷酸盐缓冲液(pH 7.0)中保存2周后得以保留。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号