• 主题
高级搜索  >
历史搜索 清空历史
首页> 美国政府科技报告 >The Influence of Solution Treatment Time and Quench Rate on Microstructure and Mechanical Properties of High-Magnesium Aluminum-Magnesium Alloys
【24h】

The Influence of Solution Treatment Time and Quench Rate on Microstructure and Mechanical Properties of High-Magnesium Aluminum-Magnesium Alloys

机译：固溶处理时间和淬火速率对高镁铝镁合金组织和力学性能的影响

获取原文
页面导航
  • 摘要
  • 著录项
  • 相似文献
  • 相关主题

摘要

Aluminum alloys containing 8-10 wt pct magnesium with further minor additions of Cu and Mn were solution treated for either 10 hours or 24 hours and subsequently quenched in either oil or water. Microstructural analysis by transmission electron microscopy and optical microscopy demonstrated that a 24-hour solution treatment when followed by water quenching was effective in retention of Mg in solution promoting more uniform precipitation during subsequent warm rolling, especially in an alloy containing 8.14 wt pct Mg-0.41 wt pct Cu. Tension and fatigue testing revealed improved fatigue resistance for this alloy when comparison was made to shorter solution treatment times and less severe quench conditions. The addition of Mn, possibly in conjunction with increased solution treatment temperature, appears to be especially effective in development of a homogeneous microstructure; an alloy containing 10.2 wt pct Mg-0.52 wt pct Mn exhibited a yielded strength of 398 Mpa (57.8 Ksi), a tensile strength of 455 Mpa (75.8 Ksi) with 11 pct elongation to fracture. (Author)

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号