首页> 外文OA文献 >Influence of varying depth of cut and feed rate to tool wear rate and surface roughness in aluminium, mild steel and P20 tool steel

【2h】

Influence of varying depth of cut and feed rate to tool wear rate and surface roughness in aluminium, mild steel and P20 tool steel

机译：切削深度和进给速度的变化对铝，低碳钢和P20工具钢中刀具磨损率和表面粗糙度的影响

页面导航

摘要
著录项
相似文献
相关主题

摘要

Since the phenomenon of tool life still not fully understood although many research and case study have been done before, an investigation on the tool wear rate and surface roughness value being done for three types of workpiece material which are aluminium, mild steel and P20 while cutting tool that been used is carbide coated insert. The main reason for this investigation is to study and understand the behavior of cutting tool in order to determine the tool wear rate and tool life. From this investigation, surface roughness value for each type of workpiece material, Ra also can be collected. This investigation been done by applying high speed machining (HSM) concept, which high feed rate with light depth of cut.

机译：尽管尽管之前已经进行了许多研究和案例研究，但由于仍未完全了解刀具寿命现象，因此对铝，低碳钢和P20三种工件在切削时的刀具磨损率和表面粗糙度值进行了研究。使用的工具是硬质合金涂层刀片。进行此项调查的主要原因是研究和了解切削刀具的行为，以确定刀具的磨损率和寿命。通过该调查，还可以收集每种工件材料的表面粗糙度值Ra。这项研究是通过应用高速加工（HSM）概念完成的，该概念具有较高的进给速度和较浅的切削深度。

著录项

作者
Nadirah Ismail;
展开▼
作者单位

展开▼
年度 2012
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Effect of Feed Rate On Difficult to Cut Metals on Surface Roughness and Tool Wear Using Surface Treated and Untreated Tools [J] . S. Thamizhmanii, C. Yuvaraj, J.S. Senthilkumar, Procedia Manufacturing . 2019,第1期

机译：进给速度对使用表面处理和未处理工具的表面粗糙度和工具磨损的难切削金属的影响
2. Effect of Feed Rate On Difficult to Cut Metals on Surface Roughness and Tool Wear Using Surface Treated and Untreated Tools [J] . S. Thamizhmanii, C. Yuvaraj, J.S. Senthilkumar, Procedia Manufacturing . 2019,第2015期

机译：进给速度对使用表面处理和未处理工具的表面粗糙度和工具磨损的难切削金属的影响
3. The Effect of Cutting Speed and Feed Rate on Surface Roughness and Tool Wear when Machining D2 Steel [J] . Mohd Rasidi Ibrahim, Tharmaraj Sreedharan, N. Aisyah Fadhlul Hadi, Materials science forum . 2017,第期

机译：切削速度和进给速度对D2钢加工时表面粗糙度和刀具磨损的影响
4. Investigation of surface roughness and tool wear length with varying combination of depth of cut and feed rate of Aluminium alloy and P20 steel machining. [C] . Madan Varmma a/I Suparmaniam, Ahmad Razlan Yusoff International Manufacturing Engineering Conference . 2016

机译：表面粗糙度和工具磨损长度的调查，不同组合铝合金和P20钢加工进料速度的深度。
5. A METALLURGICAL STUDY OF THE OXIDATIONAL THEORY OF MILD WEAR IN STAINLESS STEEL AND SURFACE MODIFIED STAINLESS STEEL (ION IMPLANTATION) [D] . HONG, HYUN-SOO. 1986

机译：不锈钢和表面改性不锈钢（离子注入）中轻度磨损氧化理论的冶金学研究
6. Laser-Assisted High Speed Machining of 316 Stainless Steel: The Effect of Water-Soluble Sago Starch Based Cutting Fluid on Surface Roughness and Tool Wear [O] . Farhana Yasmin, Khairul Fikri Tamrin, Nadeem Ahmed Sheikh, 2021

机译：激光辅助高速加工316不锈钢：水溶性Sago淀粉基切削液对表面粗糙度和工具磨损的影响
7. Investigation of Surface Roughness and Tool Wear Length With Varying Combination of Depth of Cut and Feed Rate of Aluminium Alloy and P20 Steel Machining [O] . Madan Varmma Suparmaniam, A. R. Yusoff 2016

机译：铝合金切削深度和进给率与P20钢加工的不同组合对表面粗糙度和刀具磨损长度的影响。

Influence of varying depth of cut and feed rate to tool wear rate and surface roughness in aluminium, mild steel and P20 tool steel

摘要

著录项

相似文献

相关主题

期刊订阅