首页> 外文会议>International Conference on Tungsten Tungsten Alloys >TARGET PENETRATOR INTERACTION: 70 VOLUME PERCENT TUNGSTEN-30 VOLUME PERCENT URANIUM PENETRATOR MATERIAL
【24h】

TARGET PENETRATOR INTERACTION: 70 VOLUME PERCENT TUNGSTEN-30 VOLUME PERCENT URANIUM PENETRATOR MATERIAL

机译:靶渗透剂相互作用:70体积%钨百分比百分比铀渗透材料

获取原文

摘要

A 70 volume percent tungsten/30 volume percent uranium penetrator material was fabricated by infiltrating uranium into a porous tungsten preform. This material is equivalent to a matrix substitution of uranium for nickel and iron in a conventional tu1gsten heavy alloy. The ballistic performance of the as-cast materials were compared with conventional U-3/4 Ti material at Los Alamos and the U.S. Army Ballistics Research Laboratory (BRL) Ballistic testing of the two materials showed them to be equivalent It is believed that the ballistic performance of U-3/4 Ti as related to early localized failure caused by adiabatic shear(1) Target postmortem evaluation was undertaken to determine if the same mechanism applies to the uranium-tungsten penetrator material. Areas of analysis included the penetration channels in semi-infinite rolled-homogeneous armor(RHA), and residual penetrator tubes and penetrator stubs from the BRL target. Results from the uranium-tungsten material were then compared to similar ballistic tests using U-3/4 Ti Observations in the uranium-tungsten material indicate that localized failure in the uranium matrix, similar to U-3/4 Ti, was the dominant mechanism for penetrator performance.
机译:通过浸润铀进入多孔钨预成型件,制造70卷钨钨/ 30体积%铀渗透材料。该材料相当于常规Tu1Gsten重合金中镍和铁的铀替代。将铸造材料的弹道性能与洛杉矶阿拉莫斯和美国陆军弹道研究实验室(BRL)的两种材料的弹道测试进行了比较,这两种材料的弹道检测显示了相同的是,据信弹道u-3/4 ti的性能与绝热剪切(1)靶术后术后评估引起的早期局部失败相关,以确定相同的机制是否适用于铀钨渗透物材料。分析领域包括半无限轧制 - 均匀铠装(RHA)中的穿透通道,以及来自BR1靶的残留渗透管和渗透器存根。然后从铀钨材料的结果在铀 - 钨材料采用U-3/4的Ti观察相比同类弹道测试表明在铀矩阵局部失效,类似于至U-3/4的Ti,为优势机制用于穿透性能。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号