首页>外文会议>THERMEC 2011;International conference on processing & manufacturing of advanced materials

THERMEC 2011;International conference on processing & manufacturing of advanced materials

召开年：2011
召开地：Quebec City(CA);Quebec City(CA)
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Equivalent CTOD Concept for Correction of CTOD Toughness for Constraint Loss in Steel Weld Components

机译：等效CTOD概念，用于校正CTOD韧性以消除钢焊接部件的约束损耗
- 作者：Fumiyoshi Minami
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
2.Characterization of a Biomedical Titanium Alloy using Various Surface Modifications to Enhance its Corrosion Resistance and Biocompatibility

机译：使用各种表面改性来增强其耐蚀性和生物相容性的生物医学钛合金的表征
- 作者：Rahul Bhola;Brajendra Mishra
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- titanium alloy;
- surface modifications;
- corrosion;
- biocompatibility;
3.Mechanical spectroscopy applications for investigating metallurgical processes

机译：机械光谱学在冶金过程研究中的应用
- 作者：Roberto Montanari;Ennio Bonetti
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- mechanical spectroscopy;
- internal friction;
- dynamic modulus;
- metallurgy;
4.Unusual Effect of Oxygen on the Mechanical Behavior of a p-type Titanium Alloy Developed for Biomedical Applications

机译：氧气对为生物医学应用开发的p型钛合金力学行为的异常影响
- 作者：Mitsuo Niinomi;Masaaki Nakai
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- Ti-Nb-Ta-Zr;
- β-type titanium alloy;
- biomedical applications;
- oxygen;
- strength;
- elongation;
- ω phase;
5.Scale/Physics/Time properties and functions in bioartificial systems

机译：生物人工系统中的尺度/物理/时间特性和功能
- 作者：Tamara C. Bidone;Marco A. Deriu;Giuseppe Falvo Durso Labate;Diana Massai;Umberto Morbiducci;Franco M. Montevecchi
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- multiscale modeling;
- biomaterials;
- biosystem technology;
- mechanical properties;
- mesoscale modeling;
- atomistic simulations;
- coarse grain;
6.Hot Deformation and Dynamic Recrystallization of the Beta Phase in Titanium Alloys

机译：钛合金中β相的热变形和动态再结晶
- 作者：F. Montheillet;L. Pallot;D. Piot
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- hot working;
- titanium;
- recrystallization;
- modeling;
7.Influences of Cracking of Coated Layer on Critical Current in Coated Composite Superconductor

机译：复合涂层超导体中涂层的开裂对临界电流的影响
- 作者：Shojiro Ochiai;Hiroshi Okuda;Akihiro Toda;Shinji Nagano;Michinaka Sugano;Kozo Osamua;Werner Prusseit
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- DyBCO composite superconductor;
- crack;
- current shunting;
- critical current;
- n-value;
8.NEW METHODOLOGY TO MODEL SIMULTANEOUS AND SEQUENTIAL REACTIONS: MAIN RESULTS AND APPLICATIONS

机译：用于同时和顺序反应建模的新方法：主要结果和应用
- 作者：Paulo R. Rios;Elena Villa;Simone C. de Oliveira
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- microstructure;
- analytical methods;
- phase transformations;
- recrystallization;
- IF steels;
9.Some Aspects Regarding Microstructural Heterogeneities during Steel Processing

机译：关于钢加工过程中微观结构异质性的一些方面
- 作者：J. M. Rodriguez-Ibabe;P. Uranga;B. Lopez
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- microstructural heterogeneity;
- microalloyed steel;
- thin slab direct rolling;
10.Shape Memory Epoxy Foams: New Materials for Aerospace Applications

机译：形状记忆环氧树脂泡沫：航空航天应用的新材料
- 作者：Loredana Santo
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- shape memory epoxy foam;
- SMP foam;
- smart polymers;
11.BAINITE FORMATION AT LOW TEMPERATURES IN HIGH C-SI STEEL AND ITS MECHANICAL BEHAVIOR

机译：高C-SI钢中的低温贝氏体形成及其力学行为
- 作者：Jose Alberto da Cruz Junior;Thiara Francis Mateus Rodrigues;Virginia Dutra Costa Viana;Dagoberto Brandao Santos
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- bainite;
- TRIP effect;
- retained austenite;
12.Influence of Alloying Elements on the Hall-Petch Coefficient in Ferritic Steel

机译：合金元素对铁素体钢霍尔-普氏系数的影响
- 作者：Setsuo TAKAKI
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- yield strength;
- grain refinement strengthening;
- hall-petch relation;
- grain boundary segregation;
- carbon;
- chromium;
- phosphorus;
- ferritic steel;
13.DC casting, deformation and strengthening of Al-Si alloys

机译：直流铸造，Al-Si合金的变形和强化
- 作者：Zuo Liang;Yu Fuxiao
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- Al-Si alloys;
- direct chill casting;
- solidification;
- deformation;
- microstructure;
- mechanical properties;
14.Friction Stir Processing (FSP) of Cast Metals: Processing -Microstructure - Property Relationships

机译：铸造金属的搅拌摩擦加工（FSP）：加工-微结构-性能关系
- 作者：Terry R. McNelley;E. Sarath Menon
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- friction stir processing;
- homogenization;
- microstructure refinement;
- mechanical properties;
- superplasticity;
15.Effect of Wall Thickness Transitions on Texture and Grain Structure in Additive Layer Manufacture (ALM) of T1-6AI-4V

机译：T1-6AI-4V添加剂层制造（ALM）中壁厚过渡对织构和晶粒结构的影响
- 作者：Alphons A Antonysamy;Phil B Prangnell;Jonathan Meyer
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- titanium;
- ALM;
- electron beam selective melting;
- epitaxial growth;
- β grains;
- texture;
16.Linear Friction Welding of a Forged Near-a Titanium Alloy

机译：锻造近钛合金的线性摩擦焊接
- 作者：Elvi Dalgaard;Priti Wanjara;Javad Gholipour;John J. Jonas
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- linear friction welding;
- IMI834;
- aerospace;
- titanium alloys;
- texture;
17.Sintering Performance and Mechanical Properties of Titanium Compacts Prepared by Spark Plasma Sintering

机译：放电等离子烧结钛合金的烧结性能和力学性能
- 作者：Hiroshi Izui;Genki Kikuchi
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- spark plasma sintering;
- titanium alloy;
- mechanical properties;
- alloying elements;
18.Mechanical properties and wear resistances of TiC or B_4C reinforced Ti_6Al-4V prepared by spark plasma sintering

机译：火花等离子体烧结制备的TiC或B_4C增强Ti_6Al-4V的力学性能和耐磨性
- 作者：Akinori Ota;Hiroki Egawa;Hiroshi Izui
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- TiC;
- B_4C;
- spark plasma sintering (SPS);
- titanium matrix composites;
- Ti-6Al-4V;
19.MESOSCOPIC MODELING OF DISCONTINUOUS DYNAMIC RECRYSTALLIZATION: Steady-State Grain Size Distributions

机译：间断动态再结晶的介观模型：稳态晶粒尺寸分布
- 作者：David Piot;Gilles Damamme;Frank Montheillet
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- dynamic recrystallization;
- grain boundary mobility;
- modeling;
- aerospace applications;
- superalloys;
- nickel-niobium alloys (Ni-Nb);
20.SURFACE FINISH ISSUES AFTER DIRECT METAL DEPOSITION

机译：直接金属沉积后的表面处理问题
- 作者：Peyre. P;Gharbi. M;Gorny. C;Carin. M;Morville. S;Carron. D;Le Masson P;Malot.T;Fabbro. R
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- laser;
- deposition;
- titanium;
- surface;
- melt pool;
- simulation;
21.IMPROVED PERFORMANCE IN AEROSPACE STRUCTURES WITH Ti AND Ni METAL MATRIX COMPOSITES.

机译：钛和镍金属基复合材料改善了航空结构的性能。
- 作者：Claudio Testani;Mario Tului
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- metal matrix composites;
- Ti-MMC;
- Ni-MMC reinforced structures;
22.HIGH TEMPERATURE CHARACTERISTICS OF UNIDIRECTIONALLY SOLIDIFIED Al_2O_3/GAP EUTECTIC COMPOSITES WITH A NOVEL MICROSTRUCTURE

机译：具有新型微观结构的单向凝固Al_2O_3 / GAP共晶复合材料的高温特性
- 作者：Yoshiharu Waku;Hideki Ohtsubo;Narihito Nakagawa;Hideyuki Yasuda
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- unidirectional solidification;
- eutectic composite;
- high temperature strength;
- thermal stability;
- fracture toughness;
- single crystal;
23.Powder Processing and Coating Heat Treatment on Cold Sprayed TI-6AI-4V Alloy

机译：TI-6AI-4V冷喷涂合金的粉末加工和涂层热处理
- 作者：Wilson Wong;Eric Irissou;J.G. Legoux;P. Vo;S. Yue
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- cold spray;
- heat treatment;
- Ti-6Al-4V;
- powder processing;
- mechanical properties;
24.Microstructure and mechanical properties of spray-deposited Zn-30Al-1Cu alloy

机译：喷射沉积Zn-30Al-1Cu合金的组织与力学性能
- 作者：Wang Feng;Xiong Baiqing;Zhang Yongan;Liu Hongwei;Li Zhihui;Li Xiwu
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- microstructure;
- mechanical properties;
- Zn-Al alloy;
- spray deposition;
25.Determination of the mechanism of restoration in subtransus hot deformation of Ti-6AI-4V

机译：Ti-6AI-4V亚次热变形的恢复机理确定
- 作者：F. Warchomicka;C. Poletti;M. Stockinger;HP. Degischer
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- hot deformation;
- microstructure;
- forging;
- titanium alloys;
- recrystallization;
- compression tests;
26.OBTENTION OF AN AL-BASED COMPOSITE MATERIAL BY DIRECT FUSION OF USED BEVERAGE CANS

机译：通过直接融合使用过的饮料罐来获取铝基复合材料
- 作者：C. Carrasco;C. Montalba;C. Camurri
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- aluminum recycling;
- beverage cans;
- composite materials;
- semisolid processing;
27.Simulation of hot rolling processing of an Al-Cu-Mg alloy by torsion tests

机译：Al-Cu-Mg合金热轧过程的扭转试验模拟
- 作者：Fernando Carreno;Carmen M. Cepeda-Jimenez;Felix Penalba;Manuel Carsi;Oscar A. Ruano
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- aluminium alloys;
- thermomechanical processing;
- modelling;
- efficiency maps;
28.HARDENING OF AL-MG-SI ALLOYS AND EFFECT OF PARTICLE STRUCTURE

机译：Al-MG-SI合金的硬化及颗粒结构的影响
- 作者：Sverre Gulbrandsen-Dahl;C.D. Marioara;Ketill Olav Pedersen;Knut Marthinsen
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- Al-Mg-Si alloys;
- artificial aging;
- precipitation;
- mechanical properties;
29.Modeling of Heat Treatment of Randomly Distributed Loads in Multi-Zone Continuous Furnaces

机译：多区域连续炉中随机分布载荷的热处理建模
- 作者：Alaa A. Hassan;Mohamed S. Hamed
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- heat treatment;
- continuous furnace;
- randomly distributed load;
- modeling;
- optimization;
30.Effect of Strain Rate on Hydrogen Evolution during Deformation in Al-Zn-Mg Alloys

机译：应变速率对Al-Zn-Mg合金变形过程中氢释放的影响
- 作者：Keitaro Horikawa;Hiroyuki Yamada;Masahide Mutsuo;Hidetoshi Kobayashi
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- Al-Zn-Mg alloy;
- hydrogen;
- deformation;
- mass spectrometry;
- hydrogen microprint technique;
31.Effect of rapid solidification on microstructural features of Al-Cr alloys

机译：快速凝固对Al-Cr合金显微组织特征的影响
- 作者：lya I. Tashlykova-Bushkevich;Goroh ltoh
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- aluminium chromium alloy;
- rapid solidification;
- microstructure;
- hydrogen;
32.Effect of Heat Treatments and Small Addition of Fe on the Occurrence of Serration in Al-Zn Alloys

机译：热处理和少量添加铁对铝锌合金中锯齿状发生的影响
- 作者：Teruto Kanadani;Keiyu Nakagawa;Akira Sakakibara;Koji Murakami;Makoto Hino
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- aluminum alloy;
- stress-strain curve;
- serration;
- aging;
- GP zone;
- vacancy;
33.Precipitation in Al-alloy 6016 - the role of excess vacancies

机译：铝合金6016中的沉淀-空位过多的作用
- 作者：Ahmad Falahati;Peter Lang;Ernst Kozeschnik
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- Al-Mg-Si alloys;
- vacancies;
- annihilation;
- aging;
- precipitation;
- kinetics;
34.Effect of Copper Variation and Thermomechanical Treatment on Microstructure and Properties in Aluminum Alloy Fin Stock for Heat Exchanger

机译：铜的变化和热机械处理对换热器铝合金翅片坯材组织和性能的影响
- 作者：Suk Bong Kang;Dong Bae Kim;Jaehyung Cho
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- twin roll cast;
- thermomechanical treatment;
- aluminum fin stock;
- thermal conductivity;
- tensile strength;
- sagging resistance;
35.Through Process Microchemistry Effects on the Properties of 8xxx sheet

机译：工艺微化学对8xxx片性能的影响
- 作者：Wolfgang Schneider;Galyna Laptyeva;Martin Lentz;Kai-Friedrich Karhausen
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- 8xxx alloys;
- homogenization;
- microchemistry;
- microchemistry simulation;
- phase morphology;
36.Microstructure and Properties of an AI-7.5Zn-1.5Mg -1.4Cu-0.12Zr Alloy Forging

机译：AI-7.5Zn-1.5Mg -1.4Cu-0.12Zr合金锻件的组织和性能
- 作者：Xiwu Li;Baiqing Xiong;Yongan Zhang;Zhihui Li;Jianghai You;Xiaohui Yin;Yunqiang Fan;Baohong Zhu
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- Al-Zn-Mg-Cu alloy;
- microstructure;
- properties;
- forging;
37.The effect of erbium on the properties and microstructure of Al alloys

机译：on对铝合金性能和组织的影响
- 作者：Zuoren Nie;Hui Huang;Kunyuan Gao;Bolong Li;Wei Wang;Ziyong Chen;Li Rong;Shengping Wen;Hongmei Li;Tieyong Zuo
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- aluminum alloys;
- erbium;
- precipitation strengthening;
- mechanical properties;
- thermal stability;
38.Research on Multi-artificial Aging Applied to Aluminum Alloy 7150 Plate

机译：铝合金7150板材的多人工时效研究
- 作者：Zhihui Li;Baiqing Xiong;Yongan Zhang;Xinyu Lv;Zhenbo He;Longbin Jin;Xiwu Li;Xiaolei Han
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- aluminum alloy 7150 plate;
- microstructure;
- EBSD;
- multi-artificial aging;
- properties;
39.Investigation on quench sensitivity of a heat-resistant Aluminum Alloy

机译：耐热铝合金的淬火敏感性研究
- 作者：Xinyu Lu;Zhihui Li;Guojun Wang;Yongan Zhang;Baiqing Xiong
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- 2D70 aluminum alloy;
- quench sensitivity;
- end quenching test;
- hardness;
- conductivity;
40.Combined Effect of Deformation and Precipitation on Tensile Properties of an Al-Mg-Si Alloy

机译：变形和沉淀对Al-Mg-Si合金拉伸性能的综合影响
- 作者：Michal Kolar;Katharina Teichmann;Sverre Gulbrandsen-Dahl;Ketill Olav Pedersen;Knut Marthinsen
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- Al-Mg-Si alloys;
- artificial aging;
- pre-deformation;
- precipitation;
- mechanical properties;
41.Effect of Additional Elements (Cu, Ag) on Precipitation in 6xxx (Al-Mg-Si) Alloys

机译：附加元素（Cu，Ag）对6xxx（Al-Mg-Si）合金中析出的影响
- 作者：Kenji Matsuda;Junya Nakamura;Tokimasa Kawabata;Susumu Ikeno;Tatsuo Sato;C.D. Marioara;S.J. Andersen;R. Holmestad
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- aluminum-magnesium-silicon alloy;
- aging;
- precipitation;
- Ag/Cu addition;
- hrtem;
42.Effect of the Thermomechanical Processing on Microstructure and Properties of an Al-Ce Alloy

机译：热机械加工对Al-Ce合金组织和性能的影响
- 作者：Anna Mogucheva;Dmitriy Zyabkin;Rustam Kaibyshev
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- aluminum alloy;
- equal channel angular pressing;
- ductility;
- electroconductivity;
43.Combined method of electric contact heating and diffusion connection of steel-aluminum.

机译：电接触加热和钢-铝扩散连接的组合方法。
- 作者：David Nozadze;Dimitri Macharadze
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- layered composites;
- electric contact heating;
- steel-aluminum;
- diffusion connection;
44.Producing Aluminum Foam Sandwich Panel by Melt Drag Process

机译：熔融拖动法生产铝泡沫夹芯板
- 作者：Shinichi Nishida;Hiroto Tanaka;M. Adachi;M. Motomura
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- aluminum foam sandwich panel;
- melt drag process;
- single roll strip casting;
- bonded interface;
45.Effects of Pre-Aging on Bendability of an Asymmetric-Rolled Al-Mg-Si Alloy

机译：预时效对不对称轧制Al-Mg-Si合金弯曲性能的影响
- 作者：Tomo Ogura;Akio Hirose;Tatsuo Sato
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- Al-Mg-Si alloy;
- nanocluster;
- bendability;
- asymmetric-rolling;
46.Research on the mechanical properties of AI6061 intermetallic compounds solubility as manufactured by spray casting

机译：喷铸法制备的AI6061金属间化合物溶解度的力学性能研究
- 作者：Min-Ryou;Seung Yub Baek;Myoung-Ho Kirn
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- super saturated solid solution;
- spray-cast;
- Mg_2Si intermetallic compound;
- Al061;
47.Particle Stimulated Nucleation in Severely Deformed Aluminum Alloys

机译：严重变形铝合金中的颗粒激发形核
- 作者：Jurij J. Sidor;Koenraad Decroos;Roumen H. Petrov;Leo A.I. Kestens
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- PSN;
- SPD;
- texture;
48.Superplastic Behaviour of AA5083 Aluminium Alloy with Scandium and Zirconium

机译：AA5083铝合金与锆和锆的超塑性行为
- 作者：A. Smolej;B. Skaza;B. Markoli;D. Klobcar;V. Dragojevic;E. Slacek
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- AA5083 alloy;
- scandium;
- zirconium;
- superplasticity;
49.Development of Grain Refinement in Aluminium Field

机译：铝领域晶粒细化的发展
- 作者：Baode Sun;Yanfeng Han;Jun Wang
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- grain refinement;
- Al-Ti-B master alloy;
- ultrasound;
- first-principles calculations;
50.Effect of Liquid Hot Isostatic Pressing on Structure and Mechanical Properties of Aluminum Gravity Die Castings

机译：液体热等静压对重力铸铝组织和力学性能的影响
- 作者：Elena Ivanova;Damir Tagirov;Rustam Kaibyshev
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- aluminum alloys;
- porosity;
- strength and plasticity;
- fatigue strength;
- liquid hot isostatic pressing;
51.Effect of Cold Deformation on the Paint-baking Response of Al-Mg-Si Alloy Sheet for Automotive Body

机译：冷变形对车体Al-Mg-Si合金薄板烤漆响应的影响
- 作者：Ni Tian;Lei Pan;Chuncheng Liu;Jianjun Wang;Gang Zhao;Liang Zuo;Chunming Liu
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- Al-Mg-Si aluminum alloy sheet;
- T4P temper;
- cold deformation;
- paint-baking response;
52.Manufacturing slurry and rheocasting of hypereutectic Al-Si-Cu-Mg alloy

机译：过共晶Al-Si-Cu-Mg合金的制造浆液和流变铸造
- 作者：Yasuhiro Uetani;Nanako Mori;Masayoshi Dohi;Kenji Matsuda;Susumu Ikeno
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- hypereutectic Al-Si-Cu-Mg alloy;
- semi-solid slurry;
- low-superheat melt;
- rheocast;
- age-hardening;
53.Effects of microstructures on fatigue behavior of an Al-Mg-Sc alloy at an elevated temperature

机译：显微组织对高温下Al-Mg-Sc合金疲劳行为的影响
- 作者：Chihiro Watanabe;Ryoichi Monzen
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- Al-Mg-Sc alloy;
- fatigue;
- dislocation structure;
- precipitation free zone;
54.Investigation of Quench Sensitivity of an Al-7.5Zn-1.7Mg -1.4Cu-0.12Zr Alloy

机译：Al-7.5Zn-1.7Mg -1.4Cu-0.12Zr合金的淬火敏感性研究
- 作者：Baiqing Xiong;Xiwu Li;Yongan Zhang;Zhihui Li;Baohong Zhu;Feng Wang;Hongwei Liu
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- Al-Zn-Mg-Cu alloy;
- quench sensitivity;
- TTP curve;
- precipitate;
55.Coatings of Ti and TiO2 with Defined Roughness for Implants by Gas Flow Sputtering

机译：通过气流溅射对植入物进行粗糙度限定的Ti和TiO2涂层
- 作者：U. Lembke;A. Koertge;H.-G. Neumann;K. Ortner;Th. Jung;R. Lange;U. Beck
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- gas flow sputtering;
- coating;
- implant;
- Ti;
- TiO2;
- defined roughness;
- SEM;
56.Deformability of eutectic Al-Si alloys produced by semi-continuously DC casting during hot-rolling

机译：在热轧过程中通过半连续直流铸造生产的共晶Al-Si合金的变形性
- 作者：Tao Hong;Gang Zhao;Ni Tian;Fuxiao Yu;Liang Zuo
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- Al-Si alloys;
- direct chill casting;
- eutectics;
- deformability;
57.The effect of mechanical constraints on gelatin samples under pulsatile flux

机译：机械约束对脉动通量下明胶样品的影响
- 作者：BLANGINO Eugenia;CAGNOLI Martin A.;IRASTORZA Ramiro M;VERICAT Fernando
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- gelatin tubes;
- ultrasound measurements;
- pulsatile flow;
- mobility constraints;
58.Mechanical Properties of Thermomechanically-Processed Metastable Beta Ti-Nb-Zr Alloys for Biomedical Applications

机译：用于生物医学应用的热机械加工的亚稳态Beta Ti-Nb-Zr合金的机械性能
- 作者：Vladimir Brailovski;Sergey Prokoshkin;Karine lnaekyan;Sergey Dubinskiy;Maxime Gauthier
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- shape memory alloys;
- titanium alloys;
- thermomechanical processing (TMP);
- biomedical applications;
59.Development of a Collagen/Clay Nanocomposite Biomaterial

机译：胶原/粘土纳米复合生物材料的开发
- 作者：Alejandra Reyna-Valencia;Pascale Chevallier;Diego Mantovan
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- collagen scaffolds;
- nanoparticles;
- nanocomposites;
- hydrogels;
- structure-property relationships;
60.Applications of Ceramic Nanoparticles in Nanomedicine

机译：陶瓷纳米颗粒在纳米医学中的应用
- 作者：Gianni Ciofani;Serena Danti;Leonardo Ricotti;Delfo DAlessandro;Stefania Moscato;Arianna Menciassi;Virgilio Mattoli
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- ceramic nanoparticles;
- barium titanate;
- boron nitride;
- drug delivery;
- cell stimulation;
- nanomedicine;
61.Dynamic recrystallization of biomedical Co-Cr-W-IMi (L-605) alloy

机译：生物医学Co-Cr-W-IMi（L-605）合金的动态重结晶
- 作者：Julien Favre;Akihiko Chiba;Yuichiro Koizumi;Damien Fabregue;Eric Maire
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- dynamic recrystallization;
- biomedical cobalt superalloy;
- forging;
- grain refinement;
62.Electrochemical Assessment of Cu-PIII Treated Titanium Samples for Antimicrobial Surfaces

机译：Cu-PIII处理的钛表面抗菌表面的电化学评估
- 作者：Birqit Finke;Martin Polak;Frank Hempel;Karsten Schroeder;Gerald Lukowski;Wolf-Dieter Mueller;Klaus-Dieter Weltmann
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
63.Evaluation of Bone Quality in Mandible of Young M-CSF Deficient-Induced Osteopetrotic Mouse

机译：年轻的M-CSF缺陷型骨质疏松小鼠下颌骨质量的评估
- 作者：Wataru Fujitani;Jee-Wook Lee;Takayoshi Nakano
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- osteopetrotic mouse;
- op/op mouse;
- mandible;
- biting;
- biological apatite (BAp);
- BAp orientation;
- microbeam X-ray diffraction;
64.Effect of Energy Density of Incident Beam on Mechanical Property of Titanium Alloy Products Fabricated by Electron Beam Melting (EBM) Method

机译：入射光束的能量密度对电子束熔化（EBM）法制备的钛合金制品力学性能的影响
- 作者：Hidetsugu Fukuda;Hiroyuki Takahashi;Koichi Kuramoto;Takayoshi Nakano
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- electron beam melting;
- EBM;
- rapid prototyping;
- powder;
- titanium alloys;
- anisotropy of deformation behavior;
- young's modulus;
- yield stress;
- energy density;
65.How oxygen influences the deformation mechanism of the 'Gum Metal' titanium alloy composition

机译：氧气如何影响“口香糖”钛合金成分的变形机理
- 作者：T. Gloriant;M. Besse;P. Castany;M. Cornen;D.M. Gordin;D. Laille
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- titanium alloys;
- microstructure;
- EBSD;
- tensile tests;
- deformation mechanism;
66.In vitro degradation of ultrafine grained Mg-Zn-Ca alloy by high-pressure torsion in simulated body fluid

机译：模拟体液中高压扭转体外降解超细颗粒Mg-Zn-Ca合金
- 作者：Shaokang Guan;Zhenwei Ren;Junheng Gao;Yufeng Sun;Shijie Zhu;Liguo Wang
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- Mg-Zn-Ca alloy;
- high-pressure torsion (HPT);
- degradation behavior;
- simulated body fluid (SBF);
- microhardness;
67.Preparation of HA-coated Mg-4.0Zn-1.0Ca-0.6Zr(wt) alloy and its biodegradation behaviors

机译：HA涂层Mg-4.0Zn-1.0Ca-0.6Zr（wt％）合金的制备及其生物降解行为
- 作者：Hong-qian Huang;Ren-guo Guan;Tong Zhao;Zhan-yong Zhao;Fu-rong Cao
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- HA coating;
- biological implantation materials;
- biodegradation;
- magnesium alloys;
68.Regeneration of Bone Mass and Bone Quality around Implant with Grooves for Aligning Bone Cells in Rabbit Hindlimb Bones

机译：用槽对齐兔子后肢骨骼中骨细胞的植入物周围骨质量和骨质量的再生
- 作者：Takuya Ishimoto;Kentaro Kawata;Takashi Sakai;Hideki Yoshikawa;Takayoshi Nakano
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
69.INFLUENCE OF SHAPE MEMORY PROPERTIES ON SLIDING RESISTANCE IN FIXED ORTHODONTIC APPLIANCES

机译：形状记忆特性对固定牙齿矫治器抗滑性的影响
- 作者：Laurence Jordan;Pascal Garrec;Frederic Prima
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- orthodontic archwire;
- friction;
- resistance of sliding;
- shape memory alloys;
- β-titanium;
70.Influence of Hydrogen Discharged from Palladium Base Hydrogen Storage Alloys on Cancer Cells

机译：钯基储氢合金释放的氢对癌细胞的影响
- 作者：Akio Kagawa;Keishi Katsura;Masayuki Mizumoto;Yutaka Tagawa;Yoichi Masiko
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- hydrogen;
- hydrogen storage alloy;
- palladium alloy;
- hydrogen radical;
- cancer cell;
71.Effect of heat treatments of bioactive nacre on HAp formation in SBF

机译：生物活性珍珠母质热处理对SBF HAp形成的影响
- 作者：Sengo Kobayashi;Michiko Ui;Hayato Araikawa;Tatsuaki Sakamoto;Kiyomichi Nakai
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- nacre;
- biomaterial;
- heat treatment;
- hydroxyapatite;
- bioactive;
- titanium;
- simulated body fluid;
- transmission electron microscopy;
72.Electron Beam Melting: Moving from Macro- to Micro- and Nanoscale

机译：电子束熔化：从宏观到微米和纳米
- 作者：Andrey Koptyug;Lars-Erik Raennar;Mikael Baeckstroem;Rebecca P. Klingvall
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- additive manufacturing;
- electron beam melting;
- medical implants;
- surface treatment;
73.Osteoconductive TiO_2 Coating on Titanium using Anodizing in High Content Phosphoric Acid

机译：高含量磷酸阳极氧化钛上的骨导电性TiO_2涂层
- 作者：Kensuke KURODA;Ryoichi ICHINO;Masazumi OKIDO
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- titanium oxide;
- coating;
- anodizing;
- hydro-processing;
- phosphoric acid;
- crystallinity;
- osteoconductivity;
74.Mechanical Properties of Ti-Cr-Sn-Zr Alloys with Low Young's Modulus

机译：低杨氏模量的Ti-Cr-Sn-Zr合金的力学性能
- 作者：Yonosuke Murayama;Hiromasa Sakashita;Hisamichi Kimura;Akihiko Chiba
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- meta-stable β titanium;
- young's modulus;
- martensite;
- mechanical properties;
- super-elasticity;
75.Quantitative Analysis of the Cellular Actin Cytoskeleton on Geometrically Designed Surface Topography

机译：几何设计表面形貌上细胞肌动蛋白细胞骨架的定量分析
- 作者：Claudia Matschegewski;Harald Birkholz;Susanne Staehlke;Ronny Loeffler;Dieter P. Kern;Konrad Engel;J. Barbara Nebe
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- actin cytoskeleton;
- MG-63 osteoblasts;
- microstructure;
- surface topography;
- ridge detection;
- graph-based feature;
- image processing;
76.Control of Osteoblastic Cell Behavior by Surface Topography Introduced by Plastic Deformation of Ti Single Crystal with h.c.p. Structure

机译：通过h.c.p.的Ti单晶塑性变形引入表面形貌来控制成骨细胞的行为。结构体
- 作者：Aira Matsugaki;Gento Aramoto;Takuya Ishimoto;Takayoshi Nakano
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- plastic deformation;
- single crystal;
- slip trace;
- osteoblast alignment;
- contact guidance;
77.Young's Modulus Changeable Titanium Alloys for Orthopaedic Applications

机译：用于骨科应用的杨氏模量可变的钛合金
- 作者：Masaaki Nakai;Mitsuo Niinomi;Xiaoli Zhao;Xingfeng Zhao
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- biomaterial;
- beta-type titanium alloy;
- young's modulus;
- omega phase;
- deformation-induced phase transformation;
78.RECONSTITUTED EXTRACELLULAR MATRIX IMPROVE OSTEOBLASTIC DIFFERENTIATION ONTO TITANIUM SURFACES

机译：重构的细胞外基质可促进成骨细胞在钛表面的分化
- 作者：Lia Rimondini;Federica Demarosi;Ismaela Foltran;Nadia Quirici
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- electrospinning extracellular matrix;
- stem cell;
- osteoblast;
- titanium;
- cell differentiation;
- cell proliferation;
79.THE ANALYSIS OF HIP JOINT PROSTHESIS HEAD MICROSTRUCTURE CHANGES DURING VARIABLE STRESS STATE AS A RESULT OF HUMAN MOTOR ACTIVITY

机译：人体活动导致的应力状态下髋关节假体头部微观结构变化的分析
- 作者：A. Szarek;G. Stradomski;J. Wlodarski
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- hip joint;
- endoprosthesis;
- numerical tool;
- erosion;
80.Single Crystal Growth and its Microstructure in Co-Cr-Mo alloys for Biomedical Applications

机译：用于生物医学的Co-Cr-Mo合金中的单晶生长及其微观结构
- 作者：Takayoshi Nakano;Keita Sasaki;Koji Hagihara;Takuya Ishimoto;Yusuke Fujii;Ai Serizawa
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- single crystal;
- biomaterials;
- implant;
- Co-Cr-Mo alloy;
- artificial joint;
- phase transformation;
- stacking fault;
81.Osteoblast Behavior in vitro in Porous Calcium Phosphate Composite Scaffolds, Surface Activated with a Cell Adhesive Plasma Polymer Layer

机译：在多孔磷酸钙复合支架中，成骨细胞的行为与细胞粘附血浆聚合物层表面活化。
- 作者：J.Barbara Nebe;Matthias Comelsen;Antje Quade;Volker Weissmann;Friederike Kunz;Stefan Ofe;Karsten Schroeder;Birgit Finke;Hermann Seitz;Claudia Bergemann
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- composite scaffolds;
- β-tricalcium phosphate;
- plasma technology;
- human bone cells;
- scanning electron microscopy;
- in vitro analysis;
82.Collagen-silk fibroin fibers: a promising scaffold for vascular tissue engineering

机译：胶原蛋白丝素蛋白纤维：用于血管组织工程的有前途的支架
- 作者：Estelle Paternotte;Mariana Agostini de Moraes;Marisa Masumi Beppu;Diego Mantovani
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- collagen;
- silk;
- smooth muscle cells;
- vascular engineering;
- biocompatibility;
83.High performance beta titanium alloys as a new material perspective for cardiovascular applications

机译：高性能β钛合金作为心血管应用的新材料前景
- 作者：F. Prima;F. Sun;P. Vermaut;T. Gloriant;D. Mantovani;P.J. Jacques
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- titanium alloys;
- deformation modes;
- twinning;
- ductility;
- cardiovascular applications;
84.SYNTHESIS AND CHARACTERIZATION OF HYDROXYAPATITE-BASED NANOSTRUCTURES: NANOPARTICLES, NANOPLATES, NANOFIBERS AND NANORIBBONS

机译：羟基磷灰石基纳米结构的合成与表征：纳米粒子，纳米粒子，纳米纤维和纳米粒子
- 作者：Eric M. Rivera-Munoz;Rodrigo Velazquez-Castillo;Rafael Huirache-Acuna;J.L. Cabrera-Torres;Jesus Arenas-Alatorre
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- hydroxyapatite;
- nanoparticles;
- nanoplates;
- nanoribbons;
- nanofibers;
85.Collagen based materials for biomedical applications: preparation and properties

机译：用于生物医学的胶原蛋白基材料：制备和性能
- 作者：Alina Sionkowska
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- collagen;
- biomaterials;
- films;
- surface properties;
- UV-treatment;
- photodegradation;
86.Corrosion Behavior and Surface Analysis of Melt-spun Mg-based Metallic Glass in Physiological Saline Solution

机译：生理盐水中熔纺镁基金属玻璃的腐蚀行为和表面分析
- 作者：Yongsheng Wang;Ming Jen Tan;Anders W.E. Jarfors
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- corrosion;
- metallic glass;
- magnesium alloy;
- biodegradation;
87.Electrophoretic Deposition of Organic - Inorganic Composites for Biomedical Applications

机译：生物医学应用的有机-无机复合材料的电泳沉积
- 作者：Rong Ma;Igor Zhitomirsky
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- hyaluronic acid;
- bioglass;
- hydroxyapatite;
- electrodeposition;
- film;
- composite;
88.Anodic Oxide Coatings on Ti Alloys and their Osteoconductivity

机译：钛合金上的阳极氧化膜及其骨导电性
- 作者：Dai YAMAMOTO;Kensuke KURODA;Ryoichi ICHINO;Masazumi OKIDO
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- titanium alloy;
- anodizing;
- osteoconductivity;
89.Effect of Heat Treatment On Tensile Strength, Hardness and Thermal conductivity of Blended Polymer Composite

机译：热处理对共混聚合物复合材料拉伸强度，硬度和导热系数的影响
- 作者：Nidaa Alallak
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- composite material;
- polymer blends;
- tensile strength;
- hardness;
- thermal conductivity;
90.Mechanical Behavior of High Boron Content Al-B_4C Metal Matrix Composites at Elevated Temperatures

机译：高温下高硼含量Al-B_4C金属基复合材料的力学行为
- 作者：X.-G. Chen;L. St-Georges;M. Roux
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- Al-B_4C metal matrix composites;
- mechanical properties;
- elevated temperatures;
- microstructure;
- tensile fracture;
91.Composite 316L+Al_2O_3 for Application in Medicine

机译：316L + Al_2O_3复合材料在医学上的应用
- 作者：Agata Dudek;Renata Wtodarczyk
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- composites;
- hydroxyapatite;
- austenitic steel;
- sintering;
92.Fabrication of Injection Moulded 304L Stainless Steels Reinforced with Tungsten Carbide Particles

机译：碳化钨颗粒增强的注射成型304L不锈钢的制备
- 作者：Nutthita Chuankrerkkul;Parinya Chakartnarodom
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- powder injection moulding;
- stainless steel;
- tungsten carbide;
- PEG/PMMA binder;
- composites;
93.Evaluation of Cutting Process on the Tensile and Fatigue Strength of CFRP Composites

机译：切削工艺对CFRP复合材料拉伸疲劳强度的评价
- 作者：Yoshihisa Harada;Kyohei Kawai;Takayuki Suzuki;Tokuo Teramoto
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- CFRP;
- laser process;
- fiber laser;
- CO_2 gas laser;
- water-jet;
- tensile;
- fatigue;
- heat-affected zone;
94.Investigating the potential of TiB_2-based composites with Ti and Fe additives as wettable cathode

机译：研究含Ti和Fe添加剂作为可润湿阴极的TiB_2基复合材料的潜力
- 作者：Hamed Heidari;Houshang Alamdari;Dominique Dube;Robert Schulz
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- titanium diboride;
- TiB_2 composite;
- wettable cathode;
- pressureless sintering;
- degradation;
- liquid aluminum;
- wetting angle;
- conductivity;
95.Fabrication of Metal-based Functionally Graded Grinding Wheel by a Centrifugal Mixed-Powder Method

机译：离心混合粉末法制备金属基功能梯度砂轮
- 作者：Eri Miura-Fujiwara;Hisashi Sato;Motoko Yamada;Yoshimi Watanabe
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- centrifugal mixed-powder method;
- carbon fiber reinforced plastic (CFRP);
- diamond;
- copper;
- grinding wheel;
- aluminum-silicon;
96.Microstructure and Superconductive Property of MgB_2/Al Composite Materials

机译：MgB_2 / Al复合材料的微结构和超导性能
- 作者：Manabu Mizutani;Daisuke Tokai;Kenji Matsuda;Katsuhiko Nishimura;Tokimasa Kawabata;Yoshimitsu Hishinuma;Shigeki Aoyama
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- composite material;
- aluminum;
- MgB_2;
- superconductor;
- superconductive wire;
- critical current density;
97.Degradation mechanism of polycrystalline silicon carbide fiber due to air-exposure at high temperatures

机译：高温空气暴露引起的多晶碳化硅纤维降解机理
- 作者：K. Morishita;S. Ochiai;H. Okuda;T. lshikawa;M. Sato
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- SiC fiber;
- fracture toughness;
- fracture strength;
- focused-ion-beam;
- degradation;
98.FUNCTIONALLY GRADED BIOCOMPOSITES

机译：功能齐全的生物复合材料
- 作者：Mohamad Reza Barzegari;Denis Rodrigue
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- functionally graded composite;
- wood particles;
- tensile properties;
99.Microstructure of the New Route Wire Fabrication of V_3Ga Compound Superconducting Wire Using High Ga Content Cu-Ga/V Precursor Composite Material

机译：高Ga含量的Cu-Ga / V前驱体复合材料制备V_3Ga复合超导线的新路线导线的显微组织
- 作者：Satoshi Murakami;Manabu Mizutani;Kenji Matsuda;Katsuhiko Nishimura;Tokimasa Kawabata;Yoshimitsu Hishinuma
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- superconducting wire;
- multifilament;
- V_3Ga;
- SEM;
- TEM;
- FIB;
100.Forming potential of steel/polymer/steel sandwich composites with local plate inserts

机译：具有局部板状嵌件的钢/聚合物/钢夹芯复合材料的成型潜力
- 作者：Heinz Palkowski;Olga Sokolova;Adele Carrado
- 会议名称：《THERMEC 2011;International conference on processing manufacturing of advanced materials》 | 2012年
- sandwich material;
- hybrid;
- formability;
- reinforcement;