首页>外文期刊>交通运输>Journal of ship production and design

Journal of ship production and design

SCIEI

中文名称：船舶生产与设计杂志

ISSN：2158-2866
出版周期：Quarterly

发文量：522

期刊论文

热门论文

年度选择

更多>>

全选（0）

1.Reduction of Overwelding and Distortion for Naval Surface Combatants, Part 1: Optimized Weld Sizing for Lightweight Ship Structures

机译：减少海军水面战斗机的过度焊接和变形，第1部分：轻型船舶结构的优化焊接尺寸
- 作者：T. D. Huang;Michael Harbison;Lee Kvidahl;David Niolet;John Walks;Kevin Stefanick;Mark Phillippi;Pingsha Dong;Larry DeCan;Vincent Caccese;Paul Blomquist;David Kinl;Rick Wong;Natale Nappi;James Gardner;Catherine Wong;Michael Bjornson;Allen Manuel
- 期刊名称：《Journal of ship production and design》 | 2014年第4期
- weld sizing;
- overwelding;
- shipbuilding;
- production;
- fatigue;
- shear;
- distortion;
2.Multiobjective Particle Swarm Optimization of a Planing Craft with Uncertainty

机译：不确定滑行飞机的多目标粒子群算法
- 作者：Joshua T. Knight;Frank T. Zahradka;David J. Singer;Matthew D. Collette
- 期刊名称：《Journal of ship production and design》 | 2014年第4期
- planing craft design;
- synthesis models;
- uncertainty;
- optimization;
- particle swarm optimization;
3.Comparisons Between Prediction and Experiment for Lift Force and Heel Moment for a Planing Hull

机译：滑行船体升力和后跟力矩预测与试验的比较
- 作者：Carolyn Q. Judge
- 期刊名称：《Journal of ship production and design》 | 2013年第1期
- planing hulls;
- hydrodynamics (general);
- model testing;
- dynamic stability;
4.Uniform-Panel Weld Shrinkage Data Model for Neat Construction Ship Design Engineering

机译：整洁施工船设计工程的均匀面板焊缝收缩数据模型
- 作者：Yu-Ping Yang;Harvey Castner;Randy Dull;James R. Dydo;Dennis Fanguy
- 期刊名称：《Journal of ship production and design》 | 2013年第1期
- shipbuilding;
- welding;
- distortion;
- shrinkage;
- ship panel;
- regression analysis;
- neat construction;
5.Dynamics and Stability of Boats With Aerodynamic Support

机译：气动支撑船的动力学和稳定性
- 作者：Konstantin Matveev;Nikolai Kornev
- 期刊名称：《Journal of ship production and design》 | 2013年第1期
- air-assisted boats;
- marine vehicle dynamics;
- longitudinal stability;
- wing- in-ground;
- power augmented ram;
- hydroplane;
6.Ride Severity Index: A Simplified Approach for Comparing Peak Acceleration Responses of High-Speed Craft

机译：行驶严重性指数：一种比较高速船峰值加速度响应的简化方法
- 作者：Michael R. Riley;Dr. Tim Coats;Kelly Haupt;Donald Jacobson
- 期刊名称：《Journal of ship production and design》 | 2013年第1期
- seakeeping;
- wave impact;
- peak acceleration;
- planing craft;
7.Kinetics of Electrocoagulation of Hexane Extractable Materials in Artificial Bilge Water Treatment

机译：人工舱底污水处理中己烷萃取材料的电凝动力学
- 作者：Guillermo J. Rincon;Enrique J. La Motta;Blake Mickler
- 期刊名称：《Journal of ship production and design》 | 2013年第2期
8.Numerical Modeling of a Planing Hull Maneuvering in a Regular Wave, Part 1: Dynamic Instability

机译：规则波浪中滑行船体操纵的数值模型，第1部分：动态不稳定性
- 作者：Ray-Qing Lin;Tim Smith
- 期刊名称：《Journal of ship production and design》 | 2013年第2期
- planing hull;
- maneuvering;
- incident waves;
- dynamic instability;
- numerical modeling;
9.Block Erection Sequencing in Shipbuilding With General Lifting and Joining Times

机译：具有一般起吊和接合时间的造船中的块安装顺序
- 作者：Henri Tokola;Esko Niemi;Heikki Remes
- 期刊名称：《Journal of ship production and design》 | 2013年第2期
- block erection;
- scheduling;
- optimization;
- shipbuilding;
10.Scaling of Resistance From Surface-Effect Ship Model Tests

机译：表面效应舰船模型试验的阻力定标
- 作者：Chris B. McKesson;Lawrence J. Doctors
- 期刊名称：《Journal of ship production and design》 | 2013年第2期
- resistance;
- seal;
- air cushion;
- residuary;
- model testing;
11.Large Surface Effect Ship Size Limits

机译：大型表面效应船尺寸限制
- 作者：Stefanos Koullias;Santiago Balestrini Robinson;Dimitri N. Mavris
- 期刊名称：《Journal of ship production and design》 | 2013年第2期
- SES size limits;
- SES endurance;
- SES resistance;
- SES propulsion;
- SES structures;
- technology impact forecasting;
12.Application of Pull Concept-based Lean Production System in the Ship Building Industry

机译：基于拉式概念的精益生产系统在造船业中的应用
- 作者：Khairul Hassan;Hiroyuki Kajiwara
- 期刊名称：《Journal of ship production and design》 | 2013年第3期
- shipyard;
- wastages;
- lean production;
- pull;
- just in time;
- simulation;
- optimization;
13.Analytical Approach to a Two-stage Queuing Network for the Planning of Outfitting Processes in Shipbuilding

机译：造船装配过程规划的两阶段排队网络的分析方法
- 作者：Fang Dong;Jivan Deglise-Hawkinson;Mark P. Van Oyen;David J. Singe
- 期刊名称：《Journal of ship production and design》 | 2013年第3期
- planning;
- queuing network;
- queuing theory;
- shipbuilding;
14.Optimum Speed Analysis for Large Containerships

机译：大型集装箱船的最佳速度分析
- 作者：Yee Shin Khor;Knut A. Dohlie;Dimitris Konovessis;Qing Xiao
- 期刊名称：《Journal of ship production and design》 | 2013年第3期
- optimum speed;
- containerships;
- revenue analysis;
- cost analysis;
- shippers' cost;
- technoeconomic analysis;
- bunker cost;
15.A Comparison of Numerical Methods to Predict the Progressive Collapse of Lightweight Aluminium Vessels

机译：预测轻型铝船渐进倒塌数值方法的比较
- 作者：Simon Benson;Jonathan Downes;Robert S. Dow
- 期刊名称：《Journal of ship production and design》 | 2013年第3期
- progressive collapse;
- ultimate strength;
- buckling;
- aluminium;
- orthotropic plate method;
- nonlinear finite element analysis;
16.Vibration of High-speed Ship Frames

机译：高速船架的振动
- 作者：Michael R. Davis;Gary Davidson;Timothy Roberts;Christopher Cato
- 期刊名称：《Journal of ship production and design》 | 2013年第3期
- vibration modes;
- high-speed ship hulls;
- lightweight hull sections;
17.Minimizing the Cost of Coating Ships

机译：最小化涂料船的成本
- 作者：Darren Broderick;Peter Wright;Raouf Kattan
- 期刊名称：《Journal of ship production and design》 | 2013年第3期
- coatings;
- shipbuilding;
- paint;
- minimising cost;
18.Reduction of Welding Distortion for an Improved Assembly Process for Hatch Coaming Production

机译：减少焊接变形，以改进舱口围板生产的装配过程
- 作者：Jiangchao Wang;Masanori Sano;Sherif Flashed;Hidekazu Murakawa
- 期刊名称：《Journal of ship production and design》 | 2013年第4期
- welding distortion;
- hatch coaming production;
- inherent deformation;
- thermal elastic plastic analysis;
- elastic analysis;
19.Comparison of Model-Scale and Full-scale Deceleration of a Fully Skirted Air Cushion Vehicle in Sideslip

机译：侧滑全裙式气垫车模型减缩与比例减缩的比较
- 作者：Robert E. Cole;Joseph J. Boza
- 期刊名称：《Journal of ship production and design》 | 2013年第4期
- air cushion vehicle;
- sideslip;
- model testing;
- skirt drag;
- landing craft air cushion;
20.Comparing Trimaran Small Waterplane Area Center Hull (TriSWACH), Monohull, and Trimaran Hullforms: Some Initial Results

机译：比较Trimaran小水上飞机区域中心船体（TriSWACH），Monohull和Trimaran船体形式：一些初步结果
- 作者：Tim P. McDonald;Richard W. G. Bucknall;Alistair R. Greig
- 期刊名称：《Journal of ship production and design》 | 2013年第4期
- multihulls;
- trimaran;
- TriSWACH;
- ship design;
21.The Potential Conversion of the U.S. Great Lakes Steam Bulk Carriers to Liquefied Natural Gas Propulsion: Final Report

机译：美国大湖区蒸汽散货船可能转换为液化天然气推进装置：最终报告
- 作者：Michael G. Parsons;Patrick J. OHern;Richard W. Harkins;Samuel J. Denomy
- 期刊名称：《Journal of ship production and design》 | 2013年第4期
- Great Lakes;
- bulk carriers;
- LNG;
- fuel efficiency;
- emissions;
22.Development of a Large-scale Surface Effect Ship Bow Seal Testing Platform

机译：开发大型表面效应船首密封测试平台
- 作者：Andrew D. Wiggins;Steven F. Zalek;Marc Perlin;Steven L. Ceccio;Lawrence J. Doctors;Robert J. Etter
- 期刊名称：《Journal of ship production and design》 | 2013年第4期
- surface effect ship;
- bow seal;
- resistance;
- free surface channel;
23.Risk-based Winterization for Vessels Operations in Arctic Environments

机译：北极环境中基于风险的船舶过冬
- 作者：Ming Yang;Faisal I. Khan;Leonard Lye;Heri Sulistiyono;John Dolny;Dan Oldford
- 期刊名称：《Journal of ship production and design》 | 2013年第4期
- winterization;
- vessel operations;
- risk;
- Arctic environments;
24.A Numerical Study of a Two-Dimensional Stepped Planing Surface

机译：二维阶梯式平面的数值研究
- 作者：William R. Garland;Kevin J. Maki
- 期刊名称：《Journal of ship production and design》 | 2012年第2期
- planing;
- small craft;
- hydrodynamics;
25.Plug-In Hybrid Direct Current Distribution for Ferry Systems, Escort Tugs, and Harbor Vessels

机译：用于渡轮系统，护航拖船和港口船只的插电式混合直流配电
- 作者：Vassili Rozine;John Ockerman
- 期刊名称：《Journal of ship production and design》 | 2012年第2期
- direct current;
- hybrid;
- direct current link;
- battery;
- converter;
- propulsion;
26.The Impact of Contracts on Ship Design Preparation

机译：合同对船舶设计准备的影响
- 作者：Kenneth W. Fisher
- 期刊名称：《Journal of ship production and design》 | 2012年第2期
- design;
- intellectual property;
- contracts;
27.Automatic Generation of Assembly Sequence for the Planning of Outfitting Processes in Shipbuilding

机译：自动生成装配顺序以计划造船中的装配过程
- 作者：Yan Wei;Ubald Nienhuis
- 期刊名称：《Journal of ship production and design》 | 2012年第2期
- assembly sequences;
- sequence generation;
- outfitting processes;
28.The Numerical Analysis of Temperature Field During Moveable Induction Heating of Steel Plate

机译：钢板移动感应加热过程中温度场的数值分析
- 作者：Xue-biao Zhang;Yu-long Yang;Yu-jun Liu
- 期刊名称：《Journal of ship production and design》 | 2012年第2期
- ship engineering;
- hull plate;
- line heating;
- induction heating;
- numerical simulation;
29.Flexibility in Early Stage Design of U.S. Navy Ships: An Analysis of Options

机译：美国海军舰船早期设计的灵活性：选项分析
- 作者：Jonathan Page
- 期刊名称：《Journal of ship production and design》 | 2012年第3期
- ship design;
- options;
- flexibility;
- early stage;
- uncertainty;
- cost of capability;
30.Modeling the Dry-Docking Cost - The Case of Tankers

机译：模拟干船坞成本-油轮案例
- 作者：Agamemnon Apostolidis;John Kokarakis;Andreas Merikas
- 期刊名称：《Journal of ship production and design》 | 2012年第3期
- repair;
- shipyards;
- maintenance;
- economics (operational);
31.The Potential Conversion of the U.S. Great Lakes Steam Bulk Carriers to Liquefied Natural Gas Propulsion - Initial Report

机译：美国大湖区蒸汽散货船可能转换为液化天然气动力-初步报告
- 作者：Michael G. Parsons;Patrick J. OHern;Samuel J. Denomy
- 期刊名称：《Journal of ship production and design》 | 2012年第3期
- great lakes;
- bulk carriers;
- liquefied natural gas;
- fuel efficiency;
- emissions;
32.Statistics and Design Implications of Extreme Peak Vertical Accelerations from Slamming of Small Craft

机译：小型航行器砰击产生的最高峰值垂直加速度的统计和设计意义。
- 作者：Leigh McCue
- 期刊名称：《Journal of ship production and design》 | 2012年第3期
- peak acceleration statistics;
- small craft slamming;
33.Journal of Ship Production and Design

机译：船舶生产与设计杂志
- 期刊名称：《Journal of ship production and design》 | 2012年第3期
34.Game Theory and the Shapley Value Applied to a Vessel's Drydocking

机译：博弈论和Shapley值在船舶干坞中的应用
- 作者：Jose Ramon San Cristobal
- 期刊名称：《Journal of ship production and design》 | 2012年第4期
- game theory;
- project management;
- shapley value;
35.Hydrodynamic and Supportive Structure for Gated Ship Sterns: Amphibious Ship Stern Flap

机译：门控船尾的水动力和支撑结构：两栖船尾襟翼
- 作者：Dominic S. Cusanelli
- 期刊名称：《Journal of ship production and design》 | 2012年第4期
- stern flap;
- amphibious ship;
- stem gate support structure;
- ship performance trial;
- fuel consumption;
36.Addressing Complexity Aspects in Conceptual Ship Design: A Systems Engineering Approach

机译：解决概念船舶设计中的复杂性方面：一种系统工程方法
- 作者：Henrique M. Gaspar;Donna H. Rhodes;Adam M. Ross;Stein Ove Erikstad
- 期刊名称：《Journal of ship production and design》 | 2012年第4期
- conceptual ship design;
- complex systems engineering;
- responsive systems comparison method;
37.Hull Design Method Combining an Innovative Flow Solver Coupled With Efficient Multivariate Analysis and Optimization Strategies

机译：结合创新的流量求解器和高效多变量分析与优化策略的船体设计方法
- 作者：Paolo Geremia;Kevin J. Maki;Gianpiero Lavini;Harpo Genuzio
- 期刊名称：《Journal of ship production and design》 | 2012年第4期
- optimization;
- hydrodynamics;
- multivariate analysis;
- RANSE;
- CFD;
38.Stern End Bulb for Energy Enhancement and Speed Improvement

机译：尾端灯泡，用于增强能量和提高速度
- 作者：Gabor Karafiath
- 期刊名称：《Journal of ship production and design》 | 2012年第4期
- resistance;
- powering;
- stern bulb;
- stern flap;
- wave-making;
39.Journal of Ship Production and Design

机译：船舶生产与设计杂志
- 期刊名称：《Journal of ship production and design》 | 2012年第4期
40.A Computer Simulation Model for Thermal Forming of Ship and Offshore Structures

机译：船舶和近海结构热成型的计算机仿真模型
- 作者：Thomas Kurian;Sharma Rajiv;Bhattacharyya Subroto Kumar
- 期刊名称：《Journal of ship production and design》 | 2018年第4期
- heat and mass transfer;
- geometric planar development;
- line heating;
- finite element analysis;
- plate deformation;
- thermal forming;
41.Interface Development of Ship Indoor Lighting

机译：船舶室内照明接口开发
- 作者：Wang Yung-Lien;Tseng Chun-Yuan
- 期刊名称：《Journal of ship production and design》 | 2018年第4期
- interface development;
- utilization factor method;
- ship lighting;
42.Sister Ships Applicability in the Shipbuilding Enterprise CAD-PLM Toolset

机译：姊妹船在造船企业CAD-PLM工具集中的适用性
- 作者：Pérez Rodrigo;Alonso Verónica
- 期刊名称：《Journal of ship production and design》 | 2018年第4期
- computers in operations;
- computers in construction;
- computers in design;
43.Iterative Weight Reduction Process

机译：减重迭代过程
- 作者：Jokelainen Tero;Järvenpää Antti;Saine Kari;Tuominen Janne;Mäntyjärvi Kari
- 期刊名称：《Journal of ship production and design》 | 2018年第4期
- diesel engine;
- fabrication;
- ship structure;
- sandwich structures;
- vibration;
- oil sump;
- laser welding;
44.Computational Shipyard Dynamics

机译：计算船厂动力学
- 作者：Kim Youngmin;Woo Jong Hun;Jeong Yong-Kuk;Shin Jong Gye
- 期刊名称：《Journal of ship production and design》 | 2018年第4期
- key performance index;
- Shipyard simulation;
- modeling simulation;
- process-centric simulation;
45.An Oblique 2D+T Approach for Hydrodynamic Modeling of Yawed Planing Boats in Calm Water

机译：斜2D + T方法在平静水中偏航滑行船的水动力建模
- 作者：Tavakoli Sasan;Dashtimanesh Abbas;Sahoo Prasanta
- 期刊名称：《Journal of ship production and design》 | 2018年第4期
- planning;
- maneuvering;
- hydrodynamics (general);
46.Knowledge Aware Engineering

机译：知识感知工程
- 作者：Hepinstall Lisa;Burek Greg;Dlugokecki Victoria
- 期刊名称：《Journal of ship production and design》 | 2018年第4期
- systems engineering;
- quality assurance;
- computers in design;
47.Coefficients Extraction of Model and Constrained Controller Design for Fin-Roll Stabilizer System in a Fishing Boat

机译：渔船鳍稳定系统的模型系数提取和约束控制器设计
- 作者：Hamid Malekizade;Bijan Moaveni;Mohammad Reza Jahed-Motlagh;Ehsan Esmailian;Mohammad Ghomi Avili
- 期刊名称：《Journal of ship production and design》 | 2018年第3期
- fishing boat;
- fin-roll stabilizer;
- nonlinear modeling;
- CFD method;
- constrained;
- LQR;
48.A Parametric Analysis on Hull Penetration Position and Frame Spacing Leading to Minimal Welding Distortion

机译：导致焊接变形最小的船体穿透位置和框架间距的参数分析
- 作者：Duncan Camilleri
- 期刊名称：《Journal of ship production and design》 | 2018年第3期
- hull penetrations and openings;
- welding distortion;
- numerical modelling;
- frame spacing;
49.An Improved Method of Computing Heating Information for Triangle Heating for an Automated Thermal Forming System

机译：一种自动热成型系统中三角加热的加热信息的改进计算方法
- 作者：Jungseo Park;Daekyung Kim;Jonggye Shin;Kwanghee Ko
- 期刊名称：《Journal of ship production and design》 | 2018年第3期
- thermal forming;
- triangle heating;
- curved plates;
- automated thermal forming;
50.Performance Prediction of Two-Stepped Planing Hulls Using Morphing Mesh Approach

机译：基于变形网格方法的两步平面船体性能预测
- 作者：Abbas Dashtimanesh;Arman Esfandiari;Simone Mancini
- 期刊名称：《Journal of ship production and design》 | 2018年第3期
- planing;
- hydrodynamics (hull form);
- resistance (general);
51.Design and Optimization for Ship Structure Based on Knowledge-Based Engineering

机译：基于知识工程的舰船结构设计与优化
- 作者：Guan Guan;Qu Yang
- 期刊名称：《Journal of ship production and design》 | 2018年第3期
- ship structure;
- knowledge-based engineering;
- quantum-behaved genetic algorithm;
- parametric;
52.Waterjet Modeling to Calculate High Speed Vessels' Performance

机译：水刀模型计算高速船的性能
- 作者：Shlomo Eshed
- 期刊名称：《Journal of ship production and design》 | 2018年第3期
- water jets;
- propulsion;
- high speed craft;
53.Lean Built-Up Panel Assembly in a Newbuilding Shipyard

机译：在新造船厂精益组装面板组件
- 作者：Damir Kolich;Richard L. Storch;Niksa Fafandjel
- 期刊名称：《Journal of ship production and design》 | 2018年第3期
- lean manufacturing;
- built-up panel assembly;
- value stream mapping;
- shipbuilding;
54.Various Aspects of Bollard Pull Tests and Analysis of Test Results

机译：系柱拉力测试的各个方面以及测试结果的分析
- 作者：Arun Kr Dev
- 期刊名称：《Journal of ship production and design》 | 2018年第3期
- ollard pull;
- test and trial code;
- tugs;
- offshore support vessels;
- AHTs;
- AHTSVs;
- shaft power;
- engine MCR;
- instrumentation;
- classification societies;
- vessel performance;
55.Heat Source Modeling for FCAW of Fillet Joints using Artificial Neural Networks

机译：角焊缝FCAW热源建模的人工神经网络方法
- 作者：Gadagi Amith;Mandal Nisith Ranjan
- 期刊名称：《Journal of ship production and design》 | 2019年第1期
56.Effect of Heating Spacing on Deformation Distribution of Line Heating Process

机译：加热间距对管线加热过程变形分布的影响
- 作者：Han Xiaoshuang;Zhou Bo;Tan Soon-Keat
- 期刊名称：《Journal of ship production and design》 | 2019年第1期
- line heating;
- thermal analysis;
- plate forming;
- heating spacing;
57.A New Perspective on the Complexity of On-board Primary Power Systems

机译：车载主电源系统复杂性的新视角
- 作者：Georgescu Ioana;Godjevac Milinko;Visser Klaas
- 期刊名称：《Journal of ship production and design》 | 2019年第1期
- ship conceptual design;
- on-board power systems;
- hybrid;
- energy storage;
- constraint satisfaction problems;
- configuration;
- backtracking;
58.A Study on the Statistical Calibration of the Holtrop and Mennen Approximate Power Prediction Method for Full Hull Form, Low Froude Number Vessels

机译：全船型，低弗劳德数型船舶的Holtrop和Mennen近似功率预测方法的统计标定研究
- 作者：Nikolopoulos Lampros;Boulougouris Evangelos
- 期刊名称：《Journal of ship production and design》 | 2019年第1期
- Propulsion;
- model testing;
- powering;
- estimation;
- design (vessels);
- bulk carriers;
- tankers;
59.Influence of Traverse Speed in Self-Reacting FSW of AA6061-T6

机译：往复速度对AA6061-T6自反应式FSW的影响
- 作者：Singh Piyush;Biswas Pankaj;Kore Sachin D.
- 期刊名称：《Journal of ship production and design》 | 2019年第1期
- bobbin tool;
- self-reacting;
- FSW;
- swirl zone;
- saddle shape;
60.Connecting Ship Operation and Architecture in Ship Design Processes

机译：在船舶设计过程中将船舶运营与架构联系起来
- 作者：Gernez Etienne
- 期刊名称：《Journal of ship production and design》 | 2019年第1期
- design (general);
- operation (general);
- safety;
61.Thermal Design of Double Pipe Heat Exchanger Used as an Oil Cooler in Ships: A Comparative Case Study

机译：船用油冷却器双管式换热器的热设计：比较案例研究
- 作者：Ezgi Cuneyt;Akyol Ozgur
- 期刊名称：《Journal of ship production and design》 | 2019年第1期
- double pipe heat exchanger;
- thermal design;
- oil;
- seawater;
62.Trimaran Structural Weight Optimization Based on Classification Rules

机译：基于分类规则的三体结构权重优化
- 作者：Du Lin;Pinto Gabriel Oliveira;Hefazi Hamid;Sahoo Prasanta
- 期刊名称：《Journal of ship production and design》 | 2019年第1期
- computers in design;
- design (general);
- trimarans;
- economics (design);
63.A Multi-Objective Memetic Algorithm for a Fuzzy Parallel Blocking Flow Shop Scheduling Problem of Panel Block Assembly in Shipbuilding

机译：造船面板拼装的模糊并行阻塞流水车间调度问题的多目标模因算法
- 作者：Yang Zhi;Liu Cungen;Zhang Shuiming;Shi Jun
- 期刊名称：《Journal of ship production and design》 | 2019年第2期
64.Effect of Rate of Heat Input on Thermomechanical Tensioning for Distortion Mitigation

机译：热输入速率对减轻变形的热机械拉伸的影响
- 作者：Gadagi Amith;Mandal N. R.;Podder Debabrata
- 期刊名称：《Journal of ship production and design》 | 2019年第2期
65.A Spatial Layout Optimization Program considering the Survivability of a Naval Vessel in the Early Design Stage

机译：在设计初期考虑海军舰艇生存能力的空间布局优化程序
- 作者：Jeong Yong-Kuk;Kim Youngmin;Ju Su Heon;Shin Jong Gye;Kim Jong Chul;Woo Jong Hun
- 期刊名称：《Journal of ship production and design》 | 2019年第2期
- combinatorial optimization;
- differential evolution algorithm;
- naval vessel;
- spatial layout;
- survivability;
- vulnerability;
66.Prediction of Shallow Water Resistance for a New Ship Model Using CFD Simulation: Case Study Container Barge

机译：基于CFD仿真的新船模型浅水阻力预测：案例研究
- 作者：Ammar Nader R.;Elgohary Mohamed M.;Zeid Akram;Elkafas Ahmed G.
- 期刊名称：《Journal of ship production and design》 | 2019年第2期
- shallow water resistance;
- computational fluid dynamics (CFD);
- inland water units;
- Schlichting's method;
- river Nile;
67.Comparison of Model-Scale and Full-Scale Planing Craft Accelerations in Waves

机译：波浪中模型比例尺和全尺寸平面工艺加速度的比较
- 作者：Judge Carolyn;VanDerwerken Douglas
- 期刊名称：《Journal of ship production and design》 | 2019年第2期
- high-speed craft;
- planing;
- slamming;
- waves;
68.An ICME Modeling Application for the Optimization of a Tie-Down Weld Sequence in Ship Production

机译：ICME建模在船舶生产中的束缚焊接顺序优化中的应用
- 作者：Huang T. D.;Rucker Harry J.;Yang Yu-Ping
- 期刊名称：《Journal of ship production and design》 | 2019年第2期
- tie-down;
- welding;
- ICME;
- finite element analysis;
- residual stress;
- distortion;
69.A Study on the Hydrodynamic Characteristics of a Synthetic Jet Propelled Underwater Vehicle

机译：合成喷气推进水下航行器的水动力特性研究
- 作者：Wang Chao;Lin Yang;Geng Lingbo;Hu Zhiqiang
- 期刊名称：《Journal of ship production and design》 | 2019年第2期
- synthetic jet;
- underwater vehicle;
- propulsion;
- drag characteristics;
70.Analysis of Structural Steel Renewal Weight in Ship Repairing

机译：船舶修理中结构钢的更新重量分析
- 作者：Dev Arun Kr;Saha Makaraksha
- 期刊名称：《Journal of ship production and design》 | 2019年第2期
- structural steel renewal;
- ship repairing;
- ships' age;
- ships' deadweight;
- types of ships;
- cubic number and gross tonnage;
71.Association Analysis of Piping Materials of an Offshore Structure Using Big Data Technology

机译：大数据技术的海上结构管道材料的关联分析
- 作者：Park Sung-Woo;Roh Myung-Il;Oh Min-Jae;Kim Seong-Hoon
- 期刊名称：《Journal of ship production and design》 | 2019年第3期
- association analysis;
- big data;
- piping materials;
- offshore engineering;
- PLM (product lifecycle management);
72.Thermomechanical Analysis of Tungsten Inert Gas Welding Process for Predicting Temperature Distribution and Angular Distortion

机译：钨极惰性气体保护焊过程的热力学分析，以预测温度分布和角变形
- 作者：Narang Harendra Kumar;Pandey Chandan;Thakare Jayant Gopal;Saini Nitin;Mahapatra Manas Mohan;Jha Pradeep Kumar
- 期刊名称：《Journal of ship production and design》 | 2019年第3期
- welding;
- model testing;
- thermal stresses;
73.Lean IHOP Transformation of Shipyard Erection Block Construction

机译：船厂装配块建设的精益IHOP改造
- 作者：Kolich Damir;Sladic Sasa;Storch Richard L.
- 期刊名称：《Journal of ship production and design》 | 2019年第3期
- lean manufacturing;
- IHOP;
- integrated hull construction;
- outfitting and painting;
- product work breakdown structure;
- group technology;
- kaizen;
- shipbuilding;
74.On Rough Set-Based Modeling and with Application to Process Decision for Forming Plate by Line Heating

机译：基于粗糙集的建模及其在线加热板成形工艺决策中的应用
- 作者：Feng Zhi-qiang;Jiao Zi-quan;Chen Shan-ben;Han Jun-feng;Han Xiang-xi;Yang Run-dang;Liu Cun-gen
- 期刊名称：《Journal of ship production and design》 | 2019年第3期
- rough set;
- knowledge modeling;
- fuzzy logic;
- decision-making for line heating;
75.Analysis of Forming Regularity in Line Heating Process for Curved Hull Plate by Considering the Plate Deflection

机译：考虑板变形的弯曲船体板在线加热过程中的成形规律分析
- 作者：Wang Shun;Wang Ji;Liu Yujun;Li Rui;Liu Xiao
- 期刊名称：《Journal of ship production and design》 | 2019年第3期
- line heating;
- hull plate forming;
- whole deformation;
- influence factor of deflection;
- forming regularity;
76.Weld Residual Stress Measurement Using Portable XRD Equipment in a Shipyard Environment

机译：在船厂环境中使用便携式XRD设备测量焊接残余应力
- 作者：Yang Yu-Ping;Huang T. D.;Rucker Harry J.;Fisher Charles R.;Zhang Wei;Harbison Michael;Scholler Steven T.;Semple Jennifer K.;Dull Randal
- 期刊名称：《Journal of ship production and design》 | 2019年第3期
- shipbuilding;
- welding;
- residual stress;
- x-ray diffraction (XRD);
77.Distortions in Large Stiffened Ship Panels Caused by Welding: An Experimental Study

机译：焊接引起的大型加劲板变形的实验研究
- 作者：Podder Debabrata;Das Sreekanta;Mandal Nisith R.
- 期刊名称：《Journal of ship production and design》 | 2019年第3期
- ship production process;
- large stiffened panels;
- welding sequences;
- welding induced distortions;
78.Variation Simulation and Diagnosis Model of Compliant Block Assembly Considering Welding Deformation

机译：考虑焊接变形的柔顺块总成变化仿真与诊断模型
- 作者：Lee Junghyun;Choi Wooyoung;Kang Minseok;Chung Hyun
- 期刊名称：《Journal of ship production and design》 | 2019年第3期
- shipbuilding;
- multistage assembly;
- state space equation;
- diagnostic model;
- tolerance analysis;
- welding distortion;
- variation simulation model;
79.Computational Tool Development for Weld Sequence Planning in Major Assemblies

机译：用于大型装配体焊接顺序计划的计算工具开发
- 作者：Fisher Charles R.;Denault Lori L.;Rhodes Shawn;Finley Jonathan;Gooroochurn Yogendra
- 期刊名称：《Journal of ship production and design》 | 2019年第3期
- finite-element analysis;
- FEA;
- welding;
- distortion;
- computational weld mechanics;
- CWM;
80.Enhancement of Safety and Design in Cargo Handling Spaces to Prevent Accidental Fire or Explosion in Oil Tankers and FPSOs

机译：加强货物装卸空间的安全性和设计，防止油轮和FPSO意外起火或爆炸
- 作者：Ok Duo
- 期刊名称：《Journal of ship production and design》 | 2019年第4期
- safety design;
- cargo-handling space;
- pump room;
- explosion;
- oil tanker;
- FPSO;
- offshore units;
81.Management of a Ferry Construction Project Using a Production-Oriented Design Methodology

机译：使用面向生产的设计方法管理轮渡建设项目
- 作者：Mascaraque-Ramirez Carlos;Para-Gonzalez Lorena;Marco-Jornet Paloma
- 期刊名称：《Journal of ship production and design》 | 2019年第4期
- production-oriented design;
- shipbuilding;
- optimization;
- naval construction projects;
82.Accurate FE Computation for Out-of-plane Welding Distortion Prediction of Fillet Welding with Considering Self-Constraint

机译：考虑自约束的角焊缝面外焊接变形预测的精确有限元计算
- 作者：Zhou Hong;Wang Jiangchao
- 期刊名称：《Journal of ship production and design》 | 2019年第4期
- welding distortion prediction;
- fillet welding;
- FE analysis;
- orthogonal stiffened welded structure;
- self-constraint;
83.Curved Hull Plate Classification for Determining Forming Method using Deep Learning

机译：深度学习用于确定成形方法的弯曲船体板分类
- 作者：Kim Byeongseop;Son Seunghyeok;Ryu Cheolho;Shin Jong Gye
- 期刊名称：《Journal of ship production and design》 | 2019年第4期
- deep learning;
- convolution neural network;
- curved hull plate forming;
- curved hull plate classification;
84.A Study of the Effect of Post-Heating Pulse on Hot Cracking Susceptibility in Pulsed Laser Welding of Invar Alloy

机译：后加热脉冲对殷钢合金脉冲激光焊接热裂纹敏感性的影响研究
- 作者：Zhao DongSheng;Huang ZhenYu;Liu YuJun;Miao Tangjun
- 期刊名称：《Journal of ship production and design》 | 2019年第4期
- hot cracking;
- Invar alloy;
- laser welding;
- cooling rate;
85.Efficient Computation on Prediction of Welding Residual Stress of a Large and Complex Offshore Structure

机译：大型复杂海洋结构焊接残余应力预测的有效计算
- 作者：Zhao Hongquan;Yang Jiawei;Zou Jiasheng;Liu Chuan
- 期刊名称：《Journal of ship production and design》 | 2019年第4期
- finite element method;
- residual stress distribution;
- offshore structure;
- model separation;
- stress assembly;
86.Design Point Generation Method from a Lightweight Model for Dimensional Quality Management in Shipbuilding

机译：基于轻量级模型的造船尺寸质量管理设计点生成方法
- 作者：Kwon Ki Youn
- 期刊名称：《Journal of ship production and design》 | 2019年第4期
- b-rep curve;
- dimensional quality management;
- lightweight model;
87.Additive Manufacturing Application to a Ship Propeller Model for Experimental Activity in the Cavitation Tunnel

机译：增材制造技术在船舶螺旋桨模型中用于气蚀隧道的实验活动
- 作者：Cilia Tancredi;Bertetta Daniele;Gualeni Paola;Tani Giorgio;Viviani Michele
- 期刊名称：《Journal of ship production and design》 | 2019年第4期
- additive manufacturing;
- ship model propellers;
- shipbuilding industry;
88.Multi-Objective Optimization of Internal Compartment Layout of Oil Tankers

机译：油船内部舱室布局的多目标优化
- 作者：Jafaryeganeh Hamidreza;Ventura Manuel;Soares Carlos Guedes
- 期刊名称：《Journal of ship production and design》 | 2019年第4期
- tanker;
- pollution prevention;
- safety;
- longitudinal strength;
- design;
89.A Multi-Objective Memetic Algorithm for a Fuzzy Parallel Blocking Flow Shop Scheduling Problem of Panel Block Assembly in Shipbuilding

机译：一种多目标迭代算法，用于造船中面板块组件的模糊平行阻挡流量空间调度问题
- 作者：Yang Zhi;Liu Cungen;Zhang Shuiming;Shi Jun
- 期刊名称：《Journal of ship production and design》 | 2019年第2期
90.Comparison of Model-Scale and Full-Scale Planing Craft Accelerations in Waves

机译：波浪模型规模和全面刨花工艺加速的比较
- 作者：Judge Carolyn;VanDerwerken Douglas
- 期刊名称：《Journal of ship production and design》 | 2019年第2期
- high-speed craft;
- planing;
- slamming;
- waves;
91.An ICME Modeling Application for the Optimization of a Tie-Down Weld Sequence in Ship Production

机译：ICME建模申请优化船舶生产中的焊接焊接序列
- 作者：Huang T. D.;Rucker Harry J.;Yang Yu-Ping
- 期刊名称：《Journal of ship production and design》 | 2019年第2期
- tie-down;
- welding;
- ICME;
- finite element analysis;
- residual stress;
- distortion;
92.Effect of Rate of Heat Input on Thermomechanical Tensioning for Distortion Mitigation

机译：热输入率对变形缓解的热机械张紧的影响
- 作者：Gadagi Amith;Mandal N. R.;Podder Debabrata
- 期刊名称：《Journal of ship production and design》 | 2019年第2期
93.A Study on the Hydrodynamic Characteristics of a Synthetic Jet Propelled Underwater Vehicle

机译：合成喷射推进水下车辆的流体动力学特性研究
- 作者：Wang Chao;Lin Yang;Geng Lingbo;Hu Zhiqiang
- 期刊名称：《Journal of ship production and design》 | 2019年第2期
- synthetic jet;
- underwater vehicle;
- propulsion;
- drag characteristics;
94.A Spatial Layout Optimization Program considering the Survivability of a Naval Vessel in the Early Design Stage

机译：考虑早期设计阶段的海军船舶存活性的空间布局优化计划
- 作者：Jeong Yong-Kuk;Kim Youngmin;Ju Su Heon;Shin Jong Gye;Kim Jong Chul;Woo Jong Hun
- 期刊名称：《Journal of ship production and design》 | 2019年第2期
- combinatorial optimization;
- differential evolution algorithm;
- naval vessel;
- spatial layout;
- survivability;
- vulnerability;
95.Prediction of Shallow Water Resistance for a New Ship Model Using CFD Simulation: Case Study Container Barge

机译：CFD仿真预测新船舶模型的浅水阻力：案例研究容器驳船
- 作者：Ammar Nader R.;Elgohary Mohamed M.;Zeid Akram;Elkafas Ahmed G.
- 期刊名称：《Journal of ship production and design》 | 2019年第2期
- shallow water resistance;
- computational fluid dynamics (CFD);
- inland water units;
- Schlichting's method;
- river Nile;
96.Analysis of Forming Regularity in Line Heating Process for Curved Hull Plate by Considering the Plate Deflection

机译：考虑钢板偏转，弯曲壳板线加热过程中成形规律分析
- 作者：Wang Shun;Wang Ji;Liu Yujun;Li Rui;Liu Xiao
- 期刊名称：《Journal of ship production and design》 | 2019年第3期
- line heating;
- hull plate forming;
- whole deformation;
- influence factor of deflection;
- forming regularity;
97.Association Analysis of Piping Materials of an Offshore Structure Using Big Data Technology

机译：使用大数据技术的离岸结构管道材料的关联分析
- 作者：Park Sung-Woo;Roh Myung-Il;Oh Min-Jae;Kim Seong-Hoon
- 期刊名称：《Journal of ship production and design》 | 2019年第3期
- association analysis;
- big data;
- piping materials;
- offshore engineering;
- PLM (product lifecycle management);
98.Weld Residual Stress Measurement Using Portable XRD Equipment in a Shipyard Environment

机译：在造船厂环境中使用便携式XRD设备焊接残余应力测量
- 作者：Yang Yu-Ping;Huang T. D.;Rucker Harry J.;Fisher Charles R.;Zhang Wei;Harbison Michael;Scholler Steven T.;Semple Jennifer K.;Dull Randal
- 期刊名称：《Journal of ship production and design》 | 2019年第3期
- shipbuilding;
- welding;
- residual stress;
- x-ray diffraction (XRD);
99.Thermomechanical Analysis of Tungsten Inert Gas Welding Process for Predicting Temperature Distribution and Angular Distortion

机译：钨惰性气体焊接工艺的热机械分析预测温度分布和角度变形
- 作者：Narang Harendra Kumar;Pandey Chandan;Thakare Jayant Gopal;Saini Nitin;Mahapatra Manas Mohan;Jha Pradeep Kumar
- 期刊名称：《Journal of ship production and design》 | 2019年第3期
- welding;
- model testing;
- thermal stresses;
100.Distortions in Large Stiffened Ship Panels Caused by Welding: An Experimental Study

机译：由焊接引起的大型加强船面板中的扭曲：实验研究
- 作者：Podder Debabrata;Das Sreekanta;Mandal Nisith R.
- 期刊名称：《Journal of ship production and design》 | 2019年第3期
- ship production process;
- large stiffened panels;
- welding sequences;
- welding induced distortions;

客服邮箱：kefu@zhangqiaokeyan.com

客服微信
服务号