• 主题
高级搜索  >
历史搜索 清空历史
首页> 美国政府科技报告 >Safety Performance Evaluation of Minnesota's Aluminum Work Zone Signs
【24h】

Safety Performance Evaluation of Minnesota's Aluminum Work Zone Signs

机译：明尼苏达州铝工作区标志的安全性能评估

获取原文
页面导航
  • 摘要
  • 著录项
  • 相似文献
  • 相关主题

摘要

A wide variety of traffic controlling devices are used in work zones, some of which are not normally found on the roadside or in the traveled way outside of the work zones. These devices are used to enhance the safety of the work zones by controlling the traffic through these areas. Due to the placement of the traffic control devices, the devices themselves may be potentially hazardous to both workers and errant vehicles. The impact performance of many work zone traffic control devices is mainly unknown and to date limited crash testing has been conducted, under the criteria of national Cooperative Highway Research Program (NCHRP) Report No. 350, Recommended Procedures for the Safety Performance Evaluation of Highway Features. The objective of the study was to evaluate the safety performance of existing aluminum sign support systems through full-scale crash testing. A total of six full-scale crash tests were conducted on sign supports to determine their safety performance according to the test level 3 (TL-3) criteria set forth in the NCHRP Report No. 350. Two of the six impacts on the sign support systems resulted in acceptable safety performances. Following the analysis of these crash tests as well as the test results from other testing programs, it has been found that slight variations in design features of the work zone traffic control devices can lead to very different performance results.

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号