数控龙门镗铣床
数控龙门镗铣床的相关文献在1995年到2022年内共计155篇,主要集中在金属学与金属工艺、机械、仪表工业、工业经济
等领域,其中期刊论文74篇、会议论文1篇、专利文献117484篇;相关期刊48种,包括江汉学术、设备管理与维修、金属加工:冷加工等;
相关会议1种,包括'2001机械工业数控设备使用、维修、改造经验交流会等;数控龙门镗铣床的相关文献由185位作者贡献,包括贲薇婷、张国平、张翼等。
数控龙门镗铣床—发文量
专利文献>
论文:117484篇
占比:99.94%
总计:117559篇
数控龙门镗铣床
-研究学者
- 贲薇婷
- 张国平
- 张翼
- 李列
- 欧永刚
- 彭梁锋
- 徐镇
- 葛洋
- 严江云
- 仲文刚
- 何佳龙
- 吴旭炎
- 姚天舜
- 孙德洲
- 尤军
- 崔儒运
- 常伟民
- 张凤玉
- 张文坤
- 李国发
- 李圳
- 李洪洲
- 李绍萍
- 杜大伟
- 杨兆军
- 潘建刚
- 王元伦
- 王汉明
- 王继利
- 肖宁
- 袁国樑
- 谢群亚
- 赵允阳
- 金志平
- 阚英男
- 陈菲
- 陈超
- 鞠文祺
- 韩建安
- 黄康
- 付力
- 何仕永
- 佘伟威
- 刘加华
- 刘柏
- 刘汉炎
- 刘清
- 原戒非
- 吴芳
- 唐德威
-
-
-
-
-
-
刘清
-
-
摘要:
通过记录西门子1FE1内置水冷电机的接地故障判断过程,对该类型的电机的结构、特点进行了介绍,分析了电机绝缘特性,并利用实际维修经验,例举了引发绝缘击穿的原因,针对性地提出了预防措施和改进思路,为设计人员完善电机性能,提高绝缘强度,提供了现场依据,也为设备维修人员在现场进行类似故障分析提供了思路.
-
-
唐顺勇
-
-
摘要:
数控龙门镗铣床是一种大型精密设备,具有精度高,综合经济效益高等优点.对地基基础要求极高,需严格控制有害的振动及过大的倾斜和变形.结合实际工程对POWERTEC 9000 AG-S20数控龙门镗铣床设备基础进行有限元分析计算,并对倾斜率及变形进行探讨.
-
-
-
-
-
王元伦;
彭梁锋;
李绍萍;
张文坤
-
-
摘要:
滑枕是影响数控龙门镗铣床加工精度的关键部件。针对切削加工中存在的实际问题,确立导致滑枕热变形的热源,对轴承生热率进行计算,建立热变形数学模型;对滑枕进行热性能分析,并对主轴轴系结构进行改进。结果表明:滑枕的最高温度在主轴轴承支承处,为64.13°C;滑枕的最大的热变形在主轴轴承支承端,为38.9μm;采用冷却套结构、后轴承自由支承方式,减小主轴、滑枕热变形,从而提高数控龙门镗铣床加工精度。%Ram is the key part influencing the machining accuracy of gantry type boring and milling machine .Aiming at actual problems in cutting , the heat sources causing thermal deformation of ram were found out .The heat generation rate of bearings was cal-culated, and the mathematic model of thermal deformation was set up .The thermal performance on the ram was analyzed , and the structure of bearings of the spindle unit was improved .The result shows that the highest heat point of 64.13°Cis at the bearing support part, and the biggest thermal deformation part which is 38.9μm, it is at the spindle bearing support end .Using the cooling sleeve unit and rear bearing free support structure can reduce the thermal deformation of spindle and ram , and so to improve the machining accura-cy of gantry type boring and milling machine .