首页> 外文会议>European Photovoltaic Solar Energy Conference >Progress in a-Si/a-Si Tandem Junction Thin Film Solar Modules
【24h】

Progress in a-Si/a-Si Tandem Junction Thin Film Solar Modules

机译:A-Si / A-Si串联结薄膜太阳能模块的进展

获取原文

摘要

SCHOTT Solar Thin Film has successfully brought her a-Si/a-Si tandem cell technology for ASI modules to full production. The production site in Jena with a capacity of 35 MW/a started end of 2007 and ramp up was completed in 2008. Due to continuous process improvements the initial power of the best module could be improved to 127 W which corresponds to 9.4% initial aperture efficiency. Indoor and outdoor light induced degradation of the 1.4 m~2 modules is demonstrated to be reproducible around 18%. Recently a new power class with stabilized 103 W could be introduced. Best small area development cells stabilize at 8.5% which give the near term perspective of 110 W stable module power or 8% module aperture area efficiency. A round robin comparison together with various institutes shows a high degree of reproducibility and accuracy for the power measurement of stabilized ASI modules within +/-1%. Long term monitoring of some of our early PV installations demonstrates an excellent stability over more than one decade. Schott ASI modules with thermally isolated rear side reveal a significant annealing effect and show an improved PR of up to 4%.
机译:SCHOTT Solar薄膜已成功为ASI模块提供了SI / A-Si Tandem Cell技术,以全部生产。杰纳的生产现场以2007年的35兆瓦/初期开始,2008年完成升级。由于连续过程改进,最佳模块的初始功率可以提高到127W,对应于9.4%的初始光圈效率。室内和室外光引起的1.4 m〜2模块的降解被证明可重复于18%左右。最近,可以引入具有稳定的103W的新电源类。最佳的小区域开发单元稳定为8.5%,这为110W稳定模块功率或8%模块孔径区域效率提供了近期术语视角。与各种机构一起的循环比较显示了+/- 1%内的稳定ASI模块的功率测量的高度重现性和准确性。我们早期的一些PV装置的长期监测表明,超过一十年的稳定性。具有热隔离的后侧的Schott ASI模块显示出显着的退火效果,并显示出高达4%的改进PR。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号